Building a 458 socom ar15. I planned on a tromix barrel and bolt. I was looking to figure out if I should get an 8" or 10.5" barrel. I plan on shooting a lot of subs amd suppressed. My lower is already an SBR. Also wondering if you can run a Maxim defense pdw stock with the jp scs with 458socom. Thanks

Looking for a ARMS SIR #59C or M. Funds ready.

Anyone try it out? looking for some cheaper trainer ammo

I know I can get a cosign indicator on my rail/scope, but I don't want move it from gun to gun or buy one for every rifle.
I want to learn how to do the math longhand. From geometry (or maybe it was calculus) in HS, the saying was Oscar Has A Heap Of Apples
Opposite/Hypotenuse = sign
Adjacent/Hypotenuse = cosign
Opposite/Adjacent = tangent

So how do I do angle shooting math longhand??

Looking for defiance anti SA nitrided with integral scope base 308 BF.

Switched my mini fix over to a .223 so I have everything you need to make a 300BLK pistol. Barrel has around 100 rounds on it, short handguard and the original brace that came with the pistol.

500$ shipped for all of it

Rings are 32mm height and are pretty much new. Used very little. Excellent condition. $180 shipped pp ff, venmo,zelle

Light is pretty much brand new without the box. 1000 lumes with non rechargeable batteries. You can purchase the rechargeables and make it 1500 lumens. $140 shipped pp ff, venmo,zelle

sold the aero action i was going to build so i dont need the vise jaws anymore. they are brand new. have never even been put in a vise


$20 shipped vise jaws

full comp kit c6 butt stock bag rider thumb shelf extended nose weight looking to trade for mdt acc elite or mpa vanquish possibly a tcs max with cash on my end or sell for 1150 shipped tyd

Life circumstances have changed, cleaning out personal gear. All must go, if I'm way off on price, politely tell me. Im posting a bunch of items so pics are generalized. If you're a serious buyer and want more information and specific pics, plz ask. Im not on this often, I'll try and check every 24hrs.

Public 'I'll take it' trumps all

State item in PM title

Prices are all 'Shipped' with NO INSURANCE. Any insurance that is desired is on the buyer.






Guns:
[ ] BNIB Colt gov 5" national match barrel 45 action series 70 model 0 ($750)
[ ] 6.5 prc Christensen Arms BA w/brass (round count 330) ($1175)
[ ] BNIB DD Delta 5 PRO 24" 6.5cm fde w/ thread protector, folder, mag ($2400)
[ ] Tac 338 action ($1150)
[ ] Infinity SV 38 super, slide cut rmr footprint ($3900)

AG K2 stock left hand for Impact 737 action. Used. Excellent condition. Short Arca rail. Picatinny bipod rail. $650.

Life circumstances have changed, cleaning out personal gear. All must go, if I'm way off on price, politely tell me. Im posting a bunch of items so pics are generalized. If you're a serious buyer and want more information and specific pics, plz ask. Im not on this often, I'll try and check every 24hrs.

Public 'I'll take it' trumps all

There's items with mounts and accessories in the pics, unless it's stated in the title, they're not included

State item in PM title

Prices are all 'Shipped' with NO INSURANCE. Any insurance that is desired is on the buyer.





Optics:
[ ] Used Leupold santium 15x56 (7/10 $800)
[ ] BNIB Vortex razor uhd12 (10/10 $1100)
[ ] Vortex razor spotter (8/10 $1k)
[ ] Leupold BX-4 range HD (9/10 $1100)
[ ] BNIB Impact 4000 ($1K)

[ ] Kahles k64i w/ sphur & A1st lvl (8/10 $1950)
[ ] (Brand new never used, came without box) Kahles skmr4 DLR (10/10 $2800)
[ ] Used Silco radius, no cable (7/10 $700)
[ ] Nf beast h59 (8/10 $2800)
[ ] Nf Atacr 7-35 mil C (9/10 $2750)
[ ] Bushnell xrs2 h59 blk (9/10 $800)
[ ] Bushnell xr2 g3 brn (9/10 $800)
[ ] BNIB Mk5 7-35 PR2 ($1850)
[ ] BNIB Mk5 5-25 PR2 FDE ($1950)
[ ] Mk5 5-25 TMR w/ rings ($1700)
[ ] BNIB US optics TS-25× JVCR ($700)
[ ] Vortex hst 6-24- (9/10 $500)

Got a Manners T4A team stock for sale. It’s for a Remington 700 sa footprint and has an Area 419 arca rail with baracade stop. It does have the gen 2 mini chassis and will fit a 1.25 straight taper barrel. Stock looks great the arca rail does have a couple scuffs from bipod and tripod. Price is 1150 shipped and insured PayPal or Venmo pm me and we can exchange numbers to discuss more only trades would be toward foundation mg2 or centurion

Weather looks bad for a scheduled hunt on Monday. Rain in the morning the thunderstorms in the afternoon. I’m assuming they will be moving in the morning to the feed piles…. Good or bad idea to still go?

Lightly used Eotech exps3-4 with G45 magnifier comes in original box and ppwk and sticker. Everything is in excellent condition.
I also have a Unity riser and magnifier mount for $200 when buying the Eotech and magnifier.
I easly get hits at 750 yds with 14.5" 5.56 m4a1 carbine using 69,and 77 smk in lake city brass and xbr 8208 , with the dot hold overs.
*No Trades needed
* Not looking to sell the Unity stuff before the optics sell.
$1,000 shipped Zelle or Discreete PPFF
$1,200 shipped With Unity riser and magnifier switch to center mount

For sale is an excellent condition LMT MWS.

18” 308 Barrel
Geissele SSA-E Trigger (stock trigger included)
Arca Plate
LMT DMR Stock
LMT Enhanced Trigger Guard
Magpul K2+ Pistol Grip


$3400 shipped. (Optic not included). Pending trade

New, mounted but never fired. Realized I didn’t need the 20 MOA incline.

$180 shipped
PP F&F

WTS - Sako TRG 22A1 6.5, with Nightforce ATACR 7x35 MOAR FFP .25 MOA, Pelican Case, Atlas Bipod & Swiss Arca Rail. The rifle has approximately 200 rounds through it and comes with everything listed above, as well as two magazines, a bore guide, and a Muzzle Brake.

Additional photos available on request (ask me what you want)

Asking $6500 OBRO

Photos:

I just received the suppressor today. It's the 7.62 model and came with the hub adapter for direct thread to 5/8-24. I'm wanting to replace the muzzle devices on my gassers so that I can move it around.

I'm considering using Dead Air Keymo as it is on the Huxwrx replacement list. Is there any reason to consider other like Bravo, Plan B, etc.? What has the best retention in your opinion? TIA

I have an excellent condition Leupold Mark 5 for sale. Original purchaser, includes box, accessories, paperwork and a Sphur SP-5002.

5-25x56MM
Tremor 3 Reticle
Illuminated

$SOLD

i’ve had a Dylan XL 650 bought it brand new and should’ve paid more attention as to where and why the cases were not lining up with the dies. whether it’s rifle or straight wall pistol brass it does not lineup with the center of each station.

.

Does the XL 750 fix this? Did they add a bronze bushing so that there’s not slop in the ram?


Looks like the XL 750 is basically the same except they change the primer system.


FYI, my case feeder even has a warp in the bottom half where I had to add thin card stock to level it out so the brass cases will not keep falling out of the feeder before it got to the drop spot.

I should’ve boxed it up and brought it back immediately. Now it’s past that point obviously as this is now a discontinued model and they’ve moved onto this XL 750

I’ve got a ticket with DILLAN we’ll see what they say. I’ve done everything, including adding thin bushings to the left side of the bottom of the ram pin holder… this helps to twist or force the head to the left …




I get that this is not a very expensive press in the grand scheme of things…
a misaligned, drilled or bored hole even with a bushing will still be a misaligned .. to whatever side it was drilled/bored off center on…. the slop would be reduced because it would be a much tighter fitting piece.. It doesn’t have to be like a crank and Conrod , as this is not turning at 5,000 rps… so a bronze bushing would work just fine. I would pay an extra hundred dollars or even 200 for that bronze bushing to be machined and squeezed in there for a better fit..

Now on the Hodgdon website.

I bought these last week off another hide member, then once I got them I learned they don’t fit a premier gen 2. They fit Gen 1 premiers, and acc elite. Will sell for $110 apiece shipped, $210 for both, or trade for the smaller individual internal weights if anybody has any laying around.

For sale is an MPA BA Comp Chassis. Originally Black, rattlecan/sponge-camo on top (navy, light blue, fde, orange). Original finish has only a couple small marks in it. The rattlecan finish looks good and will wear as you'd expect. Easily citristripped if you want to go back to black.

Includes NVA Bridge and Spigot (neither painted)

$550 shipped Paypal F&F. --SOLD--