New Guy from the PNW. Bought a 6.5CM a few years ago to dabble in long range shooting and fell into the rabbit whole pretty deep. Been into reloading and getting into competitions recently. Happy to be here. I try to keep things budget friendly.

Posted pm sent on post and this guy hit me up trying to act like the seller.

I’ve got an extra Seekins DMR with the preferred IMRT-R pseudomonolithic upper I don’t shoot much. Never considered selling but then someone was looking and got me thinking. I’ve decided to keep my lower though.

20” Criterion SS Match barrel 1:8tw
Fail Zero BCG (dirty from suppressed shooting)
Geissele SCH ambidextrous
Seekins AGB and hand guard
SiCo QD brake for suppressor
I have hand load development, targets, etc. 0.937 MOA ten round group 60gr Freedom Munitions VMAX. 1-1.2 MOA consistently with 77 SMK. Less than 400 rds probably.
Scope, iron sights, arca and pic rails not included.
$900 PPFF or add 4%

I have these SIMRAD caps available for sale. I am 99% sure these are for Mk11 and Mk13 platforms. Someone please correct me if I am wrong.

I am ask 175.00 shipped for each cap or $325.00 for both in a package deal.

OBO or trades as well.

Venmo payment only.

Shipping to the lower 48 only unless we work something out.

Thanks

On my hornady dies, using lapua 6.5 brass, I feel like im getting more resistance than I should when the expander ball is going in and leaving the case.

I got a set of my matchmaster dies and pulled that titanium coated expander ball off and put it on the hornady die and got the same result....

Got my 22 arc custom hornady dies and sized some hornady brass.... much smoother.

What should I be looking at here? Doesnt seem to be the expander ball when 2 of them give the same feeling.

$1100

$155

Viking armament Apex/ XLR Element 4.0 MG 700 SA chassis, only used for 2 matches, with a TR2 Buttstock and carbon Grip. I also have the XLR Carbon Fiber grip for it. $800 shipped with the carbon Grip. Only thing for sale is the chassis and buttstock. I’ll try to get better pictures up later. Still have original box the chassis came in.

Sold Pending Funds

Brand new in box. Element Theos 6-36x56 MRAD Black. This is their top of the line scope. Great glass, great turrets, lots of good reviews on this optic.
$2,050 shipped

Brand new. Short action 308 boltface. Decided to get a magnum action instead. 16oz ultra-lightweight Ti action.

$1400
Please ensure your FFL will accept from an individual.

Used Timney Calvin elite
2 stage
Flat shoe
Rem 700 with bolt release
All black

$160 shipped

Here's an interesting list, first anti-gun one is #15.

Short action Zeus QC .308 bolt face. Brand new. Payed 1640, selling for 1640.

Gents, I have been scouring the forum for info and I'm stuck in a feedback loop in my head. I want to put together a precision gas gun in .308 (because I have access to the ammo). This would be for range use, primarily, but I like to build duty-quality/reliability rifles. I had settled on Seekins builder sets for receivers/forearm because you minimize/eliminate the pressure on the barrel nut when you run the rifle on a bipod. I've discovered that they are very hard to find and expensive as hell when you do find them. My questions are these:

If not Seekins, whose upper/forearm combo is best for elimination of the input into the barrel when using a bipod? I love the direct forearm-receiver attachment but Seekins, Mega/ZEV, etc don't seem to be obtainable any more. I wish Larue had a large-frame builders set.

Am I going to spend as much money building one of these as I am buying something outright from JP (highly recommended) or an SP10 from Seekins?

I've been following @Bigjake83's posts regarding small frame precision rifle building and have used his formula to put a dandy small frame recce rifle together. I'd like to try it with a large frame.

Any input? Am I just spinning my wheels?

Thanks for your time.

looking to pick up a C4 from KRG. open to offers

Thanks

Ever since bigger stock companies have "trimmed the fat" for stock inlets, the tempo here has gone bezerk.

This is our "bedding ready" inlet for the M77 action from Ruger. It's now a std service. The receiver surfaces are offset by +.05" so that the resin casting isn't paper-thin in some spots and fat in others.

So not only does it target them and organizes violence against dealers and owners... it has a "Molotov Cocktail" icon to encourage arson and attacks.

Tesla owners were the darlings of the left until just a few weeks ago. Saving the planet and all that...

But someone took away their Twitter... and now is cutting their funding. So the answer? No... don't come up with better ideas or better political messages... nope, turn into domestic terrorists.

Bondi and Patel have said Tesla attackers will be treated as domestic terrorists. So let's see these idiot start to go to jail and if they cause injuries or deaths, they can ride the needle.

They are unhinged and unleashed! And life means nothing to them because they now think Tesla Owners are committing genocide...

Heads on a swivel, folks. They won't stop with Tesla owners! And when their molotov bombings don't work out.... they'll go after something new. With just as much violence. Churches? Elks clubs? Schools (as usual). Your restaurants that serve that meat (which is murder, after all). These folks are unhinged. And are being turned loose on America.

Sirhr

T-slot extractors BE GONE!

Have an itch for a precision Gas Gun with a nice optic. Have access to range out to 1000 yards. Steel every 100 yards.

Wanting to go with Seekins for the reputation of accuracy, etc

Can’t decide between the 18” DMR in .223 wylde or the SP10 in 6.5cm 22”. I understand they have the 6ARC in the DMR but for what I already have I want to stay with the .223 or 6.5cm.

For those that have had gone down this road or are on it would you recommend the AR15 plateform or AR10? Both, from reviews, are going to give me sub MOA accuracy with match ammo.

DMR $1,800
SP10 $2,800 (worth that extra grand?)

Thoughts? Best bang for the buck?

$38 shipped

1250.
no expiration.
Good for 2500 towards any suppressor, including the 50 cal.

Silencerco Scythe TI 100% cert…
$800
These are very nice cans.

Seekins Precision PH3 6.5 PRC 20" Woodland Shadow​

We have (2) Of these rifles on the way to us as I write this, both are Woodland Shadow. They will not be on our website just yet, we wanted to offer them here first. They will be $1849.00 + $65.00 shipping to your FFL. Message us if your interested in securing one or have any questions.

https://www.driftersgear.com/product/ph3-6.5prc-woodland-shadow-20

Drifters Gear
1127 Martin Downs Blvd
Palm City, FL 34990
(772) 202-0541

MPA Matrix Pro RH 700 SA Black. Includes EVG grip, barricade stop. She's been rode hard and put up wet. Will have original cheekpiece installed not the Bison Cheekpiece shown.sold shipped

I have a bergara bmp chassis and I’m wanting to convert it into a folder. Have a design worked up already to convert it to a picatinny style stock mount but before I put in the time and material I was looking for advice or measurements of different folding stocks from center of the pic mount to folded edge of the stock because the rear of this seems a little thick for some of the folders I’ve seen. Just want to make sure I’d be able to get the stock folded completely. Thanks in advance.