Currently running the standard 419 mount on the K540, but needed a little more eye relief as I shoot a short LOP.
Received the 419 mid cantilever yesterday, and noticed the cant portion has some flex as that connection has a relatively thin profile.

Should I be at all concerned? I’m guessing not as the 36mm scope body will add rigidity?
Am I over thinking this?

Flame suit on (in case this is perceived as a newb question).

Everything in pic is sold but the Torchworks

Torchworks $100

Sold 5/9

Doubled up a forgotten backorder and PX purchase a while back and ended up with an extra 308 1.6mm small firing pin bolt for an AXMC, #27773. It's brand new and never used.

I also have a brand new 1.6mm small firing pin to go with it that you can install in your current bolt shroud assembly. Neither AINA, Mile High, nor Euro Optic could get this for me-- they all said I had to buy a complete 308 SFP bolt assembly or firing pin and shroud assembly to get the 1.6mm firing pin. I had to go through sporting services UK who in turn had to get AIUK to create a new part number to sell just the AXMC 1.6mm firing pin by itself. Took about 6 months, but it's finally here.

Asking $825 shipped and insured for the bolt and firing pin. Payment via Zelle, discreet PayPal f&f, USPS MO, or check (will ship when payment clears.)

Selling this to fund other builds. This scope is one of my favorites but it's really too much scope for the rifle it was on. HATE selling it but I shot that rifle twice and hadn't shot it since. Been on the shooting bench only. Was just looking at a 900 meter stop sign in my backyard in clear, sunny conditions with mirage, and I could see EVERY bit of detail on that sign. I have everything it came with, (box/papers) plus a mirage cap custom made by Kreativ Solutions. The rear scope cap is right from Zeiss, and the front is custom made, so that you can flip up the cap and still screw in a sun shade or mirage cap. This scope is pristine. It was my crown jewel but I really dont shoot the rifle it was on so, here she is.

NO trades, and paypal f&f preferred.

WTB - Sgt of Arms AR-15 15.5" ARCA. They seemed to disappear, but I was hoping someone would part with one.

I have three 6-9" Harris bipods with picatinny attachments and Short Action Precision tension levers on them. They are the "S-BRP"s, where the smooth legs are sprung inwards, and held in place w/ the tension knobs. 95 shipped paypal f&f only.
This is about a 40 dollar savings from buying new. I used these very little as I prefer my other harris sbrp where the legs spring out.
These are nice and light weight, lock up pretty tight, and take up little room in the rifle bag.

No trades, and paypal f&f preferred.

Leupold MK5 5-25 CCH Reticle

Excellent condition - very well cared for - no scratches or marks of any sort

Asking sold

2 New MDT Crush it Timers left to sell $225 shipped/insured

Or take both for $430 shipped

Manners Night Stalker
TUC color
Right handed
Mini chassis for M5 bottom metal
Short action Rem 700
NV Bridge
Like new condition

Asking $sold

$400 shipped OBO

Comes with box and all papers/stuff that came with it. Still has the screen protector on it. Gently used.

Over the last few weeks I've been noticing quite a few new accounts with similar naming patterns being created. Some of them have already been reported as scammers and banned, but there appear to be a ton of others. I'm pretty sure they're not deersniper/BurtG's future alt accounts for the next time he gets banned, lol

They're using odd yet similar word combinations and patterns for names, and if you look at members online and their recent activity they're all cruising the PX. Almost all the accounts have zero posts but every now and then one will react to a post or reply to a thread, and while their posts may look ok at a glance the relevance to the thread and the grammar is usually a bit off.

Here's a few that I've found just in the last 5 minutes, and I'm sure there are lots more. Just last week about 5 accounts with 3 word names beginning with "brass" were banned after one of the accounts scammed at least one member.

Or am I totally wrong and many of these are legitimate members with names that are being automatically suggested by the forum software in the event someone can't think of a user name?

Also, I just want to say that "thrilling fuchsia monkey" sounds like a sex move on Urban Dictionary, lol

Yup, apparently donkeys have an official day today.

(2) 1A2-H 13.5-23”
(1) 1A2-25 12-25”
(2) 1A2-BR 6-9”
(2) S-L 9-13”, 1 w/ throw lever
(1) S-LM 9-13”

$500 $375 Shipped

Leupold Mark 5 CF-440 Tripod Kit New In Box - Never Used. $500 Shipped

Selling my Nightforce ELR slot, some things came up and I can no longer attend.
Asking $310, what I paid.
I can accept most digital forms of payment.

This is the ZCO made throw lever. It matches perfectly with the lines on the ZCO magnification ring. Like new, no marks or scratches.

$85 obo shipped

.300 Winmag bolt face caliber.

I have the replacement in hand and I'll be installing it later this month. I was thinking about taking the old one and getting it installed on some other rifle so I can use it to fireform brass.

Problem is I'd have to have it re-threaded, which means I'll have to have it chambered as well (I have a reamer). Don't GAF about accuracy or anything else, seems like a good idea to me as I'll save on the life of my new barrel, but I don't know if the math adds up. Also, not sure what donor action I'd use. (Bartlein MTU profile)

Has anyone done this?

I just don't don't shoot revolvers enough to keep such a gem. It will come with both 9mm and 357 mag cyclinders and the muzzle brake installed. Not looking for cash and more into trades for 2011 or bolt guns.

Has around 200 9mm down the tube and about 20 357 mag

Have 2 barrels looking to move

All 1.25 straight 7.5 twist
27”
1. 525 rounds 400$
2. O rounds 750$

Buy them both for 1k. Can provide more info and pics to serious buyers

Why is black smoke bad(no Pope) and white smoke good(new Pope)

Model 1 fighting knife with sheath and sharpening stone. Carbon steel, commando stacked leather handle, 6 year wait, never sharpened.

7 inches.

Will only ship where legal.

$900 shipped.

Hey guys, I was just curious if the ADM scope mounts get in the way of a dialing turret? I haven't really found pictures of them mounting a big dialing scope like that but it kind of seems like it might be in the way. Anyone know for sure?

March FX Tactical 4.5x-28x52 FML-TR1 Reticle 0.1MIL Illuminated Riflescope D28HV52WFIML-FML-TR1

Glass is in great condition. Some signs of wear on illumination circle knob and the elevation turret cap coin slot is a little buggered up ( you can see it clearly in pic).

First focal plane mil reticle.

Scope functions as it should.
Box, paperwork,

SOLD

Looking to sell my MPA Ba Comp chassis in Remington LA. It’s been custom cerakoted in battle worn Robin Egg blue. Has full weight MPA kit included and front spigot. Asking 800+ shipping. BIPOD AND RAIL NOT INCLUDED!!

I've been shooting AR's for 30 years, have built a ton of them. My target AR15 (223) shoots 3/8", 100 yard groups pretty easily and consistently from the magazine.
Built another AR10 308 with top tier products... because I'm pigheaded and won't give up.
Matched AERO upper and lower
Nightforce ATACR 7-35 F1 Mil C
ARC M Brace mount
Midwest industries FF handguard
SLR adjustable gas block, 9 oz. buffer
Triggertech Diamond trigger
Craddock Precision custom Bartlien heavy 18" barrel
Rubber City Armory bolt carrier with JP high pressure bolt headspaced to the barrel.
Handloading using Sierra, Berger 168, 169 and 175 hpbt, Lapua brass, etc. etc.
Probably pounded 5-6 hundred dollars of components into the berm......
All Magazine fed...because that's how it's supposed to shoot.
Every group always looks like the one on the LEFT.....
TODAY out of frustration I had 5 rounds left exactly like the ones in the left target......and for some unknown reason I decided to single feed them. I pushed a round into the chamber and dropped the bolt release for each one.
Single feed is on the right!!!!!! WTF. Seriously. 0.142" 5 shot group.
Why the difference? Is it a result of the violent forces of the BCG slamming back and forth? Sort of depressing since it's a semi auto......
What is happening during the BCG cycling process that's introducing so much inaccuracy?