Looking for one in working order.

Selling what’s in picture. Chip tray no machine and jig
All for $2500 plus shipping

New in box MDT HNT26. Rem 700 short action (and clones), fixed stock, Arca rail.
$1100 shipped. Only trade interest would be a precision 22lr bolt gun.
Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

Recently traded for this from a fellow Hide member and decided to go a different direction. According to previous owner it has been used for approximately 750 rounds total. Comes with pilots: #14, #20, #50, and #72. Does not have Aztec, but can be purchased from AMP. Let me know if you have questions. Will come in original box.

SOLD shipped.

Is it recommended to run an alcohol soaked patch through your barrel as the last step in the barrel cleaning process?

Bought this awhile back and never shot it. Don't remember the round count but it wasn't very many at all. $100 shipped

SOLD

Looking to trade my fat bastard 5/8x24 for a 30 cal pva ultralite jet blast 5/8x24.

So lots of talk last few days after the Heritage foundation discovered that the only document Biden signed as president was the one where he quit the race.

Every single other bill and executive order was signed with an auto pen.

As folks are saying, whoever controlled the auto pen controlled the presidency And people are coming forward to say that Biden didn’t remember signing things even days after they were signed.

So the chatter is all about whether auto pen signing of bills is actually legal. Or whether Biden‘s entire history of executive orders and signing legislation is vacated.

I suspect it’s a Supreme Court question. Or is it? What’s the precedent? What’s the law? If it says the president has to sign bills for them to become law. If the president doesn’t sign it then how can an order or piece of legislation be valid?

Somehow, I think overturning an entire presidency might get a little bit weird constitutionally. Then again that’s what the constitution is for!!

Does an auto pen controlled by someone who is not the president suffice for executive orders, pardons and Bills?

Is there a precedent? For example, when Woodrow Wilson was president following his stroke, his wife pretty much ran the presidency. Does that constitute a precedent that would allow Jill or some staffer to use the auto pen?

Love to know what our legal minds think!!

Sirhr

Rare Brass:

Norma 257 Roberts +P - $59.95 / 50 ct

Norma 17 Rem - $39.95 / 50 ct

Norma 358 Norma Mag - $99.95 / 50 ct

New Norma 458 Lott Brass just arrived as well. $119.95 / 50 ct

also in stock:

500 Jeffery

284 Win

375 Flanged Mag NE

I’ve got a black T2 on scalarworks mount, FDE T2 on Kastle mount, eotech EXPS 3-4, primary arms ACSS cyclops, Holosun SCRS GR-2, and I have a 2.5 and 5.0 moa SRO but only want to sell one.
Black T2 $625 or $750 with mount
FDE T2 $900 with mount both brand new
EXPS 3-4 $650 new
Primary arms cyclops $200
Holosun $200
SRO $475 for either one
All prices shipped conus

Anyone tired of their cz p10 f competition? Looking to try one out and figured I would see if anyone had one collecting dust before I go order one.

I'm trying to figure out witch seating stem to use for the Hornady 73 ELDM They list one for the 75/80/88/90 and the same for the A-Max pills. What are you all finding works to seat these damn things? Also need to get the seating die. Midsouth has one for 28.00 but it says it is for the .223, .222 as well as several other .224 cal rounds. Is that the right one?

Selling a RAL8000 Schmidt & Bender PMII 5-25x56 with MTC LT turrets and H59 reticle. The scope is in great condition with a few minor cosmetic blems on the scope body finish from normal use. Comes as shown with factory box.

SOLD

No trades please.

Sold the rifle this was so don’t need it sitting around tempting me for another build.

This is the second focal plane mil reticle/turrets. The coin a lot for the elevation turret is marred up a bit but still completely functional.

Asking $800 for the scope
$110 for the rings
$125 for the flatline ops level.

One of the screws for the the ring cap has some rust on it as pictured.

Open to trades toward 9mm pistols or maybe other stuff. Send me some ideas.

13.9 BA stainless barrel
Nox comp/FH keymo
Grey ghost upper and lower
SLR rail
SLR adjustable gas

1500 shipped Tyd or 1450 local to KC/OP area.

Selling my first PRS chassis Chassis was purchased new from Sportsman's and the Rail was bought direct from Area419.

MAGPUL PRO 700 CHASSIS: HAND PAINTED FLECKTARN PATTERN.
Made for Remington 700 short action clones. PRO 700 Chassis. Originally black. Sponge painted by me. Durable 4 layer Matte Clear is holding like a pro job. Can supply colors and the process to the new buyer.

NOTES:
*Chassis punches above it cost and class.
*Can be swapped to left hand in under a minute.
*Easily Held a comp contour Proof SS 26". (NOT INCLUDED)
*Looks great and functions even better!
* When fully kitted out, it's lighter than what you'd read in the internet.
*Great hunting chassis or PRS learner rig.
*ZERO operational issues. Like new!

SPECIAL ADD-ON'S:
*Comes with a custom cut MAGPUL PRO Night Vision Bridge. Work done by a local smith/metal shop. Allows for use with 56mm scope sunshades now. OEM style would need to be removed. Hand-painted to match the chassis. No additional charge. ($150 value)
*Comes with new and never used 10 round Magpul AICS Magazine. OEM was a 5 rounder. Cut from package for fit and pics. Never fired.
Will ship in OEM packaging with all OEM hardware and accessories.

PRICE: SOLD


Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

4 are 1/2x28, silencerco is 5/8x24, none of the 1/2's have been used 40each ppff or make me an offer, these have been sitting way too long

Steiner T6Xi 3-18x56, MSR2 reticle, green illum. Includes original caps, box, etc. Good shape, just dusty. Glass and function are perfect. $old

I have some specific project needs, so the ONLY trades look like:
Manners PPF LA
Leica 50210
Trijicon TARS103

Selling a few accessories from my first PRS rifle setup. Great products in like new or slightly used condition. See pics.

A) MDT BAG RIDER. MLOK mounting
*The light salt is from the first and only match it was used for last weekend.
*Lockup is tight and performs as intended.
*Will not ship in OEM packaging.
Price: SOLD

B) COLE-TAC FLAT BAG. OLIVE DRAB GREEN. CANVAS MATERIAL
*Bought new and unused from the Hide.
*Never taken outside.
*BACKBONE NOT INCLUDED.
*Will not ship on OEM packaging
Price: SOLD

C) WIEBAD CHEEK PAD RISER. FOR MAGPUL PRO CHASSIS. BLACK.
*Used for training range trips. Never saw a match.
*Cleaned and prepped for sale .
*Straps split for improved mounting capability.
*Will not ship on OEM packaging
Price: SOLD

Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

Vectronix Vector Viper 2 in great shape. Glass is phenomenal. Ranged 3000 yards just yesterday in bad conditions. Comes with carrying case and operator manual.

$4000 ( last comp I found on eBay went for $4950 with some extras)

Vectronix PLRF10- Great shape, comes with carrying case. Ranges 2000 plus yards with pinpoint accuracy all day long. $1000

Leica 10x42 3200.com- great glass, great shape. Connects to kestrel data and presents the info in the glass.
$1650

Leica Duovid 10-15x50- these have been great for scanning for wildlife at 10 power then simply flipping to 15 power if you need more details. Glass is what you would expect. Great shape. $1200

Vortex impact 4000 laser range finder.


Might be interested in trades for high end optics.

I have not bought Targets in quite a while and it seems that are quite expensive these days. Is there anyone Hide Friendly selling AR500 steel targets in the DFW metroplex? I am in the North Dallas area (McKinney Frisco). I am looking for a single large square target Probably at least 24"x36" or larger and either 1/2" or 3/8" thick. Does anyone have a recommendation as to where I can buy this? I am trying to keep the purchase local so I can pick it up to save shipping. Doesn't really have to be a target maker, just any business that can sell a rectangle shape piece of AR500.

Thanks

Looking to track down for an AXMC.
LFP Assembly
LFP Lapua Bolt (338)

Also looking for a black or stainless 300 PRC barrel for the AXMC.

In a perfect world, I want a SFP setup that I’m willing to PAY good price for if you have one, but that’s a year out at minimum I’m told.

Pm or text me…815-878-8255