c2 for trade. Looking for a 2024 staccato CS or sr30 upper. RAL8k slide, full size grip module from Dark Side Precision, fitted barrel, trigger, and ignition job from DSC(EGW ignition upgrade kit, Red Dirt Trigger, and trigger job) Acro P1, Parker Mountain Machine compensator, (factory barrel and trigger included) surefire x300, and 3 mags included, 1 17rd and 2x 21rd mags. TV $3500

Anyone have an extra or two lying around? Would like a 12 and a 10 with the new followers in them if possible. Let me know what ya got.

The rifle is a Bergara b14 hunter, I used it hunting for many years, it took rain, fog, snow amd blizzards. After an hunt in rough weather i always cleaned the bore but I have to admit i never babied it. Since I go hunting at least 30 times per year and i take one animal more or less everytime, sometimes hunting 3 times a week during autumn and winter, of course it was impossible to clean the bore to bare metal everytime i shot. I preferred to keep accuracy and POI consistent keeping the barrel fouled. I stored it always in a humidity controlled room. There is absolutely no surface rust, even where the finish of the rifle went totally off for rubbing against the backpack or against my body. It has shot more or less 500 .308 win factory rounds and it is still very accurate, shooting easily 0.3 MOA with a couple factory loads.

After all these years i decided to clean the bore to bare metal since this rifle is going to retire for a while and it will be used only occasionally from now on.

I found this spot with what looks like pitting/corrosion more or less 15 inches from the chamber (it is a 22 inch barrel). There are a few other spots looking like this but smaller than this one in the same area of the bore. The rifling looks good in the rest of the bore and it wasn't difficult at all to clean all the fouling and copper.

I am not worried about this because the rifle shoots very well and this spots are not located in the most critical portion of the bore but i am curious about what could have caused this. It is a button rifled barrel and it was the first time i borescoped it.

Thanks for the input guys!

A true custom built 2011 Rimfire racegun that’s built to go fast! I just picked this thing up last week after waiting a few months for it to be built. Shot 3 of my best times in the first Steel Challenge match with it last weekend. Truly an awesome tool for someone who is serious about going fast with a Rimfire pistol. I’m only selling due to a recent sponsorship opportunity that won’t allow me to use this platform.

Will come just like it did from Chet Whistle and the Precision Defense team with one 10 round magazine.. In addition, it will come with 8 additional 15 round magazines.

Can be purchased with or without the optic that was installed new last week with the gun. Have the box for the optic.

Avoid the wait time, and save a few bucks!

$2300 gun and magazines
$2600 with optic

Charlotte, NC. Happy to ship to your FFL.

CZ Shadow 2 Optic Ready. Cajun Gun Works trigger job and polishing of all internals. Gun runs like a sewing machine. This was purchased as a back up gun to my primary USPSA gun but due to some recent injuries I’m not shooting enough USPSA to warrant having two of the same guns. This one has less than 500 rounds and shows no signs of internal or external wear. Will come with all of the factory springs, original box, paperwork etc.

LOK palm swell bogie grip panels
Impact Machine optic plate for RMR/Holosun
Holosun 507 Comp (new with gun)
Comptac right hand holster
3 original magazines (barely used, if ever)

$1250 without Holosun and optic plate
$1500 with Holosun and plate

I have lots more pictures but couldn’t post here due to size constraints. Happy to send to an interested buyer.

Not looking for any trades but may consider some trades. Assuming you have a fair valuation of your trade.

Located in NC. Happy to ship to your FFL.

Minox ZP5 3-15x50 with the illuminated MR5 reticle. Excellent condition.

817-7six 7-3 four 54.

$1500 shipped with mount.

Out of curiosity, anyone shooting one of these rifles? The newest version, appears they have changed a few things on them. Accuracy, stock fitment, loose folded/unfolded(the old ones were wobbly and Rugged didn't GAF). I had a couple older ones, were ok but just like a fat chick-was a good idea at the time--

The 18095 model to be specific, not, get a prefit, Origin, etc. etc.

https://www.ruger.com/products/precisionRifle/specSheets/18095.html

Are there any other options besides the Field Optics Research Rapid Release that have BOTH of these options on the base? The reviews I found for that product are shaky at best (pun intended).

I have Manfrotto tripods with RC2 and several 200PL plates already. If I change the tripods over to Arca, then I need all new plates for my camera gear. And adding a 200PL to a tripod adapter adds a fair amount of bulk (probably last resort).

I did find that Manfrotto now makes a 200PL-PRO plate that is both Arca and RC2 compatible. Still don't want to buy all new plates.

Probably should mention the mount to the binos is a 1/4-20 threaded hole.

Thank you in advance.

Cloud Defensive Rein 3.0 FDE
Part # 3.0-DF-S-650 FDE
100,000 candela
1,250 lumens
This thing is insanely bright and will reach out to 300+ yards.

Light was mounted on a build that sat in the safe unfired. Parted with the rifle and have no use for the light.

$225 shipped to lower 48 UPS ground

2 unopened cases (400 rounds total) of 6.5PRC 147gr ELDM. Open to other match ammo trades, or sell for $400 shipped per case

Savage model 99 cambered in 300 savage and a Weaver optic $700
San Diego ca

This is a beautiful M1A I have had if you years with less the 200 rounds through is it has a real leather cheek riser a Sadlak optic mount , and a spring field armory optic 4x14x56 $2800 San Diego ca

XBR 8208 8# $400 per jug​

I have 2 available. Shipping to your door including hazmat is $35.

Beautiful M1 grand I inherited it a long time ago and have never fired it from what I gather it started out as a CMP and was completely gone through and restored with a new stock. Beautiful condition has not been fired since restoration. $1,800.00 firm San Diego ca

I have a beautiful Cousin built rifle from fine firearms in San Diego less then 100 rounds through it. light weight in at 6.8 pounds without optic

Razor TI action

Proof carbon barrel

XLR, magnesium, chassis and carbon fiber stock

Jewel trigger

Tully aluminum rings

titanium comp

Leupold vx6HD 4x24

AICS mag

100 rounds of ammo

And reloading dies

6k complete rifle
4.5k without optic

Sorry not sure where I'm supposed to post.
I'm looking to get into long range target shooting and I'm wondering if the zuse is the better smoother action. Would a complete mpa rifle satisfy you?
I'm wondering if I'd be better off just buying a mpa vanquish because budget is maxed, and I would also like to get a seekins hunting rifle or build on a hnt26 chassis. Also this is all MSRP I'm going to try to get most of it used

Ruger American fans who want a solid, no-fuss upgrade, we got something for you! The MDT Field Stock is now available for the Ruger American Long Action. Field Stock

For Sale: I have one pair (2) of brand new Gray Ops external M-Lok dog bone style weights, with QC sling mount. Bought for a project and did not use them. These are very nice black nitride weights with all attach hardware. They weigh 6oz each and measure 3.125 x 1.225 x .4. Sell this pair for $55 shipped to your door.

Selling a Sig P226 with threaded barrel, night sights and 2 mags. Less than 100rnds through it.
$850 obo
May trade for a gas gun upper or some short range glass

Wife and I watched it last night, both thoroughly enjoyed it. Both of us thought it was well written and casted (wife is a big fan of Neal McDonough so getting her to watch wasn't too hard)

For such a small company, Angel Studios has really been putting out some damn good movies...Sound Of Freedom, The Shift, Bonhoeffer....all been damn good watches.

Looking forward to watching Homestead: The Series, looks to be a good continuation of the movie.

Good afternoon everyone. Recently shot the Sooner State Safari match and figured out some things I need to do differently for time management and deployment. My tripod ( a bog) is just not up to the job. Broke a tripod leg during a stage.

Picked up a cert for Leofoto and am just curious what others are using and what my best option would be from them. I appreciate input on tripods but am looking for a Leofoto since I have a cert and am poor. If you were shopping for one like me, what sounds good and why?

Also, a good recommendation for a tax table, plate bag and again what and why?

Thanks in advance for the help.

Looking to buy Zermatt arms action wrench. Please reach out to me if you have one you’re willing to part with. Thanks

Finally got my HK P30 LEM collection put together and wanted to share.

There's also an easter egg in the picture for sharp-eyed members here that adds an element of legitimacy to the picture/post.

-LD


ETA: if you picked up on the easter egg- PM me rather than posting it here and I'll confirm or deny if that's 'it'. Let's give the chickens some feed to peck at.

I have a vision chassis inlet for a Remington 700 short action. Chassis is cerakoted grey but has fde, dull green Aluma Hyde on it which can be easily removed by purchaser if desired. There are some slight marks on the arca interface and minor relief for bolt handle clearance on the buttstock. It comes with full internal weight kit, 6x external weight kit, fixed stock interface, folding stock interface, and night vision bridge. All in the would be ~2300 new. Asking $1500 shipped within conus, with any extra insurance on the purchaser. I accept PayPal ff. Would entertain partial trades for terminus Zeus qc 22 gt or dasher barrel with minimal to no round count.

There are few creatures as beautiful or as deadly as the cobra.






Naturally, men of our stock are attracted to such critters and for millennia have asked themselves "if only I could harness that beauty & lethality"...and our ancestors have forever thus tried to tame the beast only to find out generations later that the cobra cannot be tamed and once more-we found out that they're quite prolific and reproduce far faster than anticipated.

Did you know a single cobra can lay between 10-30 eggs? I didn't before going down this noble endeavor and before I knew what was happening- I was left with a snake pit as deadly as they are beautiful...








I sought to my elders, I looked towards our ancestors on how I could possibly reign in this den of cobras and wield their strengths while understanding their potential for harm and also appreciating their beauty and suddenly a solution was presented from of all places but the jungles of Vietnam...

I needed a bonafide snake-eater to watch over the rapidly growing snake pit... I searched high & low and found myself a true champion to watch over my flock...







Pictured above is my snake pit- a CCO, Kobra Carry & Kobra Gov't along with my latest addition to the Ed Brown Collection, a Gov't Special Forces model.

-LD