Selling a RAL8000 Schmidt & Bender PMII 5-25x56 with MTC LT turrets and H59 reticle. The scope is in great condition with a few minor cosmetic blems on the scope body finish from normal use. Comes as shown with factory box.

SOLD

No trades please.

Sold the rifle this was so don’t need it sitting around tempting me for another build.

This is the second focal plane mil reticle/turrets. The coin a lot for the elevation turret is marred up a bit but still completely functional.

Asking $800 for the scope
$110 for the rings
$125 for the flatline ops level.

One of the screws for the the ring cap has some rust on it as pictured.

Open to trades toward 9mm pistols or maybe other stuff. Send me some ideas.

13.9 BA stainless barrel
Nox comp/FH keymo
Grey ghost upper and lower
SLR rail
SLR adjustable gas

1500 shipped Tyd or 1450 local to KC/OP area.

Selling my first PRS chassis Chassis was purchased new from Sportsman's and the Rail was bought direct from Area419.

MAGPUL PRO 700 CHASSIS: HAND PAINTED FLECKTARN PATTERN.
Made for Remington 700 short action clones. PRO 700 Chassis. Originally black. Sponge painted by me. Durable 4 layer Matte Clear is holding like a pro job. Can supply colors and the process to the new buyer.

NOTES:
*Chassis punches above it cost and class.
*Can be swapped to left hand in under a minute.
*Easily Held a comp contour Proof SS 26". (NOT INCLUDED)
*Looks great and functions even better!
* When fully kitted out, it's lighter than what you'd read in the internet.
*Great hunting chassis or PRS learner rig.
*ZERO operational issues. Like new!

SPECIAL ADD-ON'S:
*Comes with a custom cut MAGPUL PRO Night Vision Bridge. Work done by a local smith/metal shop. Allows for use with 56mm scope sunshades now. OEM style would need to be removed. Hand-painted to match the chassis. No additional charge. ($150 value)
*Comes with new and never used 10 round Magpul AICS Magazine. OEM was a 5 rounder. Cut from package for fit and pics. Never fired.
Will ship in OEM packaging with all OEM hardware and accessories.

PRICE: SOLD


Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

4 are 1/2x28, silencerco is 5/8x24, none of the 1/2's have been used 40each ppff or make me an offer, these have been sitting way too long

Steiner T6Xi 3-18x56, MSR2 reticle, green illum. Includes original caps, box, etc. Good shape, just dusty. Glass and function are perfect. $old

I have some specific project needs, so the ONLY trades look like:
Manners PPF LA
Leica 50210
Trijicon TARS103

Selling a few accessories from my first PRS rifle setup. Great products in like new or slightly used condition. See pics.

A) MDT BAG RIDER. MLOK mounting
*The light salt is from the first and only match it was used for last weekend.
*Lockup is tight and performs as intended.
*Will not ship in OEM packaging.
Price: SOLD

B) COLE-TAC FLAT BAG. OLIVE DRAB GREEN. CANVAS MATERIAL
*Bought new and unused from the Hide.
*Never taken outside.
*BACKBONE NOT INCLUDED.
*Will not ship on OEM packaging
Price: SOLD

C) WIEBAD CHEEK PAD RISER. FOR MAGPUL PRO CHASSIS. BLACK.
*Used for training range trips. Never saw a match.
*Cleaned and prepped for sale .
*Straps split for improved mounting capability.
*Will not ship on OEM packaging
Price: SOLD

Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

Vectronix Vector Viper 2 in great shape. Glass is phenomenal. Ranged 3000 yards just yesterday in bad conditions. Comes with carrying case and operator manual.

$4000 ( last comp I found on eBay went for $4950 with some extras)

Vectronix PLRF10- Great shape, comes with carrying case. Ranges 2000 plus yards with pinpoint accuracy all day long. $1000

Leica 10x42 3200.com- great glass, great shape. Connects to kestrel data and presents the info in the glass.
$1650

Leica Duovid 10-15x50- these have been great for scanning for wildlife at 10 power then simply flipping to 15 power if you need more details. Glass is what you would expect. Great shape. $1200

Vortex impact 4000 laser range finder.


Might be interested in trades for high end optics.

I have not bought Targets in quite a while and it seems that are quite expensive these days. Is there anyone Hide Friendly selling AR500 steel targets in the DFW metroplex? I am in the North Dallas area (McKinney Frisco). I am looking for a single large square target Probably at least 24"x36" or larger and either 1/2" or 3/8" thick. Does anyone have a recommendation as to where I can buy this? I am trying to keep the purchase local so I can pick it up to save shipping. Doesn't really have to be a target maker, just any business that can sell a rectangle shape piece of AR500.

Thanks

Looking to track down for an AXMC.
LFP Assembly
LFP Lapua Bolt (338)

Also looking for a black or stainless 300 PRC barrel for the AXMC.

In a perfect world, I want a SFP setup that I’m willing to PAY good price for if you have one, but that’s a year out at minimum I’m told.

Pm or text me…815-878-8255

part # 05-960

Both were installed in a lower but never taken out of the safe. Like new condition and unfired..

$190 each shipped to lower 48 UPS ground

this could go in the Ukraine thread but it goes to my more gen ? i know it is early in the trump admin,that there are many huge probs he inherited,i know he is getting insane push back from the left. i still have a concern about several things,this being 1. Putin has said no temp cease fires only some final result on acceptable terms to him. that makes sense in context here.
IMHO any aid to Ukraine at all should be stopped now and forever. resuming mil and intel aid seems like a red flag waved at Russia. can't see how this aids a peace deal. we should stop all aid and offer to broker a deal-nothing else.
of course all "aid" should be stopped going everywhere. we are way more than broke. we need funding here,which is a separate discussion. RFK backing off on MMR vaccine is another ? i have.
grabbing a few thousand illegals is under achievement i think. i have lost a lot of confidence in many of his chosen helpers.
it just appears that many campaign commitments to action have gotten sluggish.
is this being unrealistic and hoping to see too much sooner than possible? yea,i know my concerns are of no importance to the rulers.

c2 for trade. Looking for a 2024 staccato CS or sr30 upper. RAL8k slide, full size grip module from Dark Side Precision, fitted barrel, trigger, and ignition job from DSC(EGW ignition upgrade kit, Red Dirt Trigger, and trigger job) Acro P1, Parker Mountain Machine compensator, (factory barrel and trigger included) surefire x300, and 3 mags included, 1 17rd and 2x 21rd mags. TV $3500

Anyone have an extra or two lying around? Would like a 12 and a 10 with the new followers in them if possible. Let me know what ya got.

The rifle is a Bergara b14 hunter, I used it hunting for many years, it took rain, fog, snow amd blizzards. After an hunt in rough weather i always cleaned the bore but I have to admit i never babied it. Since I go hunting at least 30 times per year and i take one animal more or less everytime, sometimes hunting 3 times a week during autumn and winter, of course it was impossible to clean the bore to bare metal everytime i shot. I preferred to keep accuracy and POI consistent keeping the barrel fouled. I stored it always in a humidity controlled room. There is absolutely no surface rust, even where the finish of the rifle went totally off for rubbing against the backpack or against my body. It has shot more or less 500 .308 win factory rounds and it is still very accurate, shooting easily 0.3 MOA with a couple factory loads.

After all these years i decided to clean the bore to bare metal since this rifle is going to retire for a while and it will be used only occasionally from now on.

I found this spot with what looks like pitting/corrosion more or less 15 inches from the chamber (it is a 22 inch barrel). There are a few other spots looking like this but smaller than this one in the same area of the bore. The rifling looks good in the rest of the bore and it wasn't difficult at all to clean all the fouling and copper.

I am not worried about this because the rifle shoots very well and this spots are not located in the most critical portion of the bore but i am curious about what could have caused this. It is a button rifled barrel and it was the first time i borescoped it.

Thanks for the input guys!

A true custom built 2011 Rimfire racegun that’s built to go fast! I just picked this thing up last week after waiting a few months for it to be built. Shot 3 of my best times in the first Steel Challenge match with it last weekend. Truly an awesome tool for someone who is serious about going fast with a Rimfire pistol. I’m only selling due to a recent sponsorship opportunity that won’t allow me to use this platform.

Will come just like it did from Chet Whistle and the Precision Defense team with one 10 round magazine.. In addition, it will come with 8 additional 15 round magazines.

Can be purchased with or without the optic that was installed new last week with the gun. Have the box for the optic.

Avoid the wait time, and save a few bucks!

$2300 gun and magazines
$2600 with optic

Charlotte, NC. Happy to ship to your FFL.

CZ Shadow 2 Optic Ready. Cajun Gun Works trigger job and polishing of all internals. Gun runs like a sewing machine. This was purchased as a back up gun to my primary USPSA gun but due to some recent injuries I’m not shooting enough USPSA to warrant having two of the same guns. This one has less than 500 rounds and shows no signs of internal or external wear. Will come with all of the factory springs, original box, paperwork etc.

LOK palm swell bogie grip panels
Impact Machine optic plate for RMR/Holosun
Holosun 507 Comp (new with gun)
Comptac right hand holster
3 original magazines (barely used, if ever)

$1250 without Holosun and optic plate
$1500 with Holosun and plate

I have lots more pictures but couldn’t post here due to size constraints. Happy to send to an interested buyer.

Not looking for any trades but may consider some trades. Assuming you have a fair valuation of your trade.

Located in NC. Happy to ship to your FFL.

Minox ZP5 3-15x50 with the illuminated MR5 reticle. Excellent condition.

817-7six 7-3 four 54.

$1500 shipped with mount.

Out of curiosity, anyone shooting one of these rifles? The newest version, appears they have changed a few things on them. Accuracy, stock fitment, loose folded/unfolded(the old ones were wobbly and Rugged didn't GAF). I had a couple older ones, were ok but just like a fat chick-was a good idea at the time--

The 18095 model to be specific, not, get a prefit, Origin, etc. etc.

https://www.ruger.com/products/precisionRifle/specSheets/18095.html

Are there any other options besides the Field Optics Research Rapid Release that have BOTH of these options on the base? The reviews I found for that product are shaky at best (pun intended).

I have Manfrotto tripods with RC2 and several 200PL plates already. If I change the tripods over to Arca, then I need all new plates for my camera gear. And adding a 200PL to a tripod adapter adds a fair amount of bulk (probably last resort).

I did find that Manfrotto now makes a 200PL-PRO plate that is both Arca and RC2 compatible. Still don't want to buy all new plates.

Probably should mention the mount to the binos is a 1/4-20 threaded hole.

Thank you in advance.

Cloud Defensive Rein 3.0 FDE
Part # 3.0-DF-S-650 FDE
100,000 candela
1,250 lumens
This thing is insanely bright and will reach out to 300+ yards.

Light was mounted on a build that sat in the safe unfired. Parted with the rifle and have no use for the light.

$225 shipped to lower 48 UPS ground

2 unopened cases (400 rounds total) of 6.5PRC 147gr ELDM. Open to other match ammo trades, or sell for $400 shipped per case

Savage model 99 cambered in 300 savage and a Weaver optic $700
San Diego ca