Selling a brand new in box Geissele Super Duty Rifle 556, 16” Black. 1650 shipped to your FFL. Will not ship to MD, NJ, CA, NY

Looking to sell my American rifle company mausingfield m5 right hand with magnum and .308 bolt face, closed top with 20moa pic rail. Both barrels shoot great sub 1/2” groups with handloads consistently.

Comes with

Crb comp contour 6brx barrel spun up by ts customs, 26” threaded 5/8-24, 1/7.5twist 800rounds

Bartlein spiral fluted 7sherman short chambered by ts customs as well, 26” threaded 5/8-24(muzzle brake not included) 400 rounds

Comes with all parts to swap between bolt faces and a short action customs action wrench end.

Also includes 284pc of alpha 6br brass fire formed to brx, 198 of them are loaded ammo. As well as a whidden bushing sizing die, and a forster seating die.

I could also include my loaded 7sherman ammo and dies for an additional cost.

For the action, both barrels, 6brx ammo/dies would be $2500 shipped i am not looking to separate items.


Would trade for defiance ruckus tactical/ tactical UL action with magnum bolt face plus cash on your end.

For sale or trade.
1: 8 lb.
5: 1 lb all same lot.
$50 per pound or trade for H4350, H1000, or Varget. I would much prefer to sell all 13 lbs together.
I am in Monroe, NC and shoot fairly often at Hawk's Ridge and Coleman's Creek. No shipping.

Selling a LNIB Spuhr SP-4002C. Included are:

A-0119 the side mount bubble level.
A-0029 Diving Board.

Had this set up on my AI AXSA with the Schmidt & Bender High Power 6-36 (Also listed for sale here)

$485 (SPF) shipped and insured for everything. Not looking to separate at this time. USPS money order preferred and a video chat before money exchanges hands.

Thanks.

For sale or trade is the custom curly maple stock from my NRL Hunter rifle. Shot great, just can't help but build another rifle.

Action: Origin / Rem700 Clones
Barrel: Proof Sendero (cut pretty tight, see pic)
Bottom Metal: M5 (shown with MDT BM)
Picatinney bipod rail
Arca balance point rail

Any questions just ask. I can also fit it to a barreled action if you'd like.

Stock - $875
Stock & BM - $1000

3 sets of dies. Practically brand new. Only used the seating dies a few times because I started with new brass. Sizing dies have never been used.
6.5prc
300prc
6.5 creedmoor

$140/shipped each

Login to view embedded media
Two years ago I got the Recce 5K out for review on my (then) brand new YouTube channel. My can was a prototype version with an inferior flash hider to the final design. @green0 was kind enough to allow me to send my can in for both the final version of the flash hider, as well as their brand new Inconel blast baffle.

So, you can see my final thoughts 2yrs and 1500rds later, as well as updated flash performance, NV footage, and some backpressure testing. It’s a medium backpressure can, and pairs nicely with their Gas Pocket BCG. The BCG is the milspec version and definitely reduces gas to the face, especially with a Super Safety. It also makes a noticeable difference on sound with longer gas systems.

At some point I plan to do a comparison video of some of the recent “hybrid” medium backpressure can: I’ve got the Recce 5K, Stacy’s Mom, Anechoic, Rex ULBP, and awaiting approval on an EA Ferox. My brother will also be submitting on a TK RB come January. Interested to see how they all compare!

Looking to sell two of these scopes. Both have two range trips on them and are LNIB. Part number is 163-911-42F-M2-I5 on both. Exact same scope. I can’t see a flaw on either with the one being wrapped since new. I can unwrap if wanted and provide more pictures of both. Video chat before money changes hands is also preferable.

$3,350 each shipped and insured conus. Discount if you buy both. Prefer USPS money order or similar. Also have some mounts I’ll be listing as well for flat top rifles such as Barrett MRAD and Accuracy International AX’s

Both SPF.

Like new condition Aero Precision 15" FDE Solus chassis for 700 short actions and clones. $525 shipped (lower 48) Paypal f&f.

For sale. Stainless steel ECCO Machine adapter to use HUB threaded suppressor on a Thunderbeast muzzle device. Like new condition, used for less than 200 rounds. No wrench rash. ECCO polymer wrench was used and is included in sale.
$70 shipped in conUS, paypal gift.
Thanks for looking, MBanning

Hello everyone, I just wanted to ask if it's possible to remove the buttstock of an oryx chassis in order to clean the bore with a rod, many thanks

Does anyone know of a forum specifically for photography?? Something like the hide but simply for photography. The goto place for questions and also has a robust for sale section you can buy good equipment.

Thanks
Bob

S&S Precision build. Remington 700 action. I’m the second owner. Purchased locally but I never have time to shoot long range, so selling it. The previous owner had it put together by S&S Precision, and only shot 200 rounds through it. Remington 700 action, Magpul bottom metal, Magpul 5 round magazine, 24” threaded Carbon fiber 300 Winchester Magnum barrel. I have 232 rounds of factory 180 grain ammo I can add for $200 + shipping if you want it.

$1,500 obo for the rifle, shipped to your FFL.

Hi I have a set of binos I bought from Jay @Surgeon_Shooter . I bought them as a loaner/backup set and that haven't been used more then 30 minutes since I got them.
Pretty good condition is say 9/10.
They take AA.

I don't have spec sheets but I was told they were around 2400+ from and I trust him.
Priced accordingly at $7k. I bought them for 8.5.

Only trades would be for a Nox or better thermal setup. If it's new I'd even do a straight trade.


Best attempt at through the lens picture.

Check my feed back I've sold from zco's to pvs-24's here.

Thank you

Putting a feeler out there Im looking to trade into a Mpct-1x reticle. My scope is in excellent condition. 527 Mpct-3x 10 MIL NLE. Looking for same specs with the Mpct-1x reticle.

Or if your willing to put a little cash in your pocket I have an excellent condition AtacR 7-35 F1 Mil-XT

I recently picked up an AXMC in 338 Lapua. My local range does not allow anything over 300 caliber, so I also purchased the 300 bolt body (part 20013) and a 300 PRC barrel (part 2527073BL). After the conversion to 300 PRC, the pin is either not or barely making contact with the primer. Does this setup need the small firing pin or is this most likely a headspacing issue with the barrel?

I have 2 MG2 stocks in Coyote and 1 in Dark Distressed. Hawkins bottom metals are available for 2 of them. All stocks have 360 Precision steel arca rails ($180), and all have lead weight kits. Priced at $1,000 each, shipped. Stock #1 will work for big horn or impact. The others are for Impact.

Same lot, 6 bricks (3k rounds).

Asking $720 shipped

Used, but in like new condition 12" YHM one piece quad rail with fresh coat of FDE cerakote. Comes with barrel nut, lock ring, qd socket, sling stud, and enclosed screw-in handguard cap.

$150 shipped.

Used but in like new condition Midwest Industries 15" round Free Float tube. Comes with barrel nut, 2", 4", and 6" pieces of aluminum pic rail. Outside diameter is 2", inside is 1.75" so many suppressors will fit inside if you are looking for that option.

$150 shipped.

Unknown manufacture 223 wylde chamber, 1:8 twist, 5/8x24 threaded muzzle. Very low round count, no firecracking. Comes with gas block and gas tube. .870 gas block diameter.
$200 shipped.

Selling a brand new Aero Solus LT long action. Bought for a custom build and decided to go another direction.
Includes two bolt faces (.480 and .545 bolt faces)


Asking $650 shipped to your local FFL

All brand new.

Vortex 34mm Precision low - $100
Vortex 34mm Precision High - $100
Vortex Pro 1” Low - $50

(2) Atlas BT65-LW17 - $300 e

Odin Works Atlas 9 adjustable comp - $75

Prices are shipped

Selling my sig kilo 3000 BDX 10x42. Looking for $500 shipped