Aero Solus 17in chassis in custom Cerakote mix. $650

Bonneville Alberta this morning. Someone drove an excavator into the Police Station lot and started destroying the Police Vehicles.

FS/FT are the following parts available from an upper I parted out:


- SOLD Compass Lake Engineering cut 14.5” SS Douglas Tactical contour barrel, 5.56 match chamber, 0.078 gas port, 1/2x28 threads, 1:7 twist. Midlength gas system. About 200 rounds through it. Just painted it with krylon flat black, so it'll come off easy if you don't like that. Comes with a tightly fitting Geissele Super Gas Block and gas tube. Was previously pinned and welded but removed cleanly with zero damage to threads. Asking $SOLD shipped.



- LMT Enhanced Bolt Carrier (bolt and small parts are sold). Has about 50ish rounds on it. $SOLD hipped

Salmon River Internal weight for 17in Aero Precision Solus chassis. $125

Asking 3000.00 shipped and insured. PM questions. Comes with ADM & co witness QD mount. Also comes with soft case and original box ad papers. Has a few handling marks, but very low hours.

I just picked up one of these rifles and the Achilles’ heel of it in my mind are the magazines. You’re forced to do a reload on a 12 round stage. Is anyone currently printing magazine extensions? I tried to get my L3 I magazine extension for my CZ to work and it is a no go.

Looking to sell my Manners MCS-TA mini chassis in Altus Highland camo. Integrated bottom metal. Short Action. 3.4lb and Sendero/M24 profile. Pm with questions.

Like new, $145 shipped

Great condition Vortex Defender XL 8moa red dot. This DOES include the pic rail mount, it's just not in the pictures. Also includes all original mounting screws and Glock MOS plate.

Priced to move at $230 shipped. PayPal F&F, Venmo, or Cashapp.

NIB Knights Armament Co. #KM21318 FF RAS long hand guard. Zelle or postal money order accepted. Thanks.

Glock 34 Gen 5 MOS in 9mm with about 2,000 flawless rounds down the barrel. Coming with one 17rd magazine, backstraps, and hard case.

I paid $730 new for this a few months ago, so it's a single owner. Priced to sell at $500 plus shipping to your local FFL. Local pick up available for North Alabama. PayPal F&F, Cashapp, Venmo, or cash.

Question guys.
Does bullet seating effect std dev?
The issue I’m getting, with my dasher and 308, I get a std dev in the single digits, my 223 bolt gun is getting around 25 to 30 std Div. My process is the same on all, but the difference is I use LW Wilson seating die for the dasher and the 308 and a standard rcbs for the 223. It’s the only difference I can find. Thoughts?

WTB Barrel vise. One that can handle a carbon fiber barrel.

KIDD Supergrade barreled action. 20” heavy stainless. KIDD 1lb/1lb two-stage. RPG chassis with XLR C-6 buttock. Internal weights included. 2- mags $SOLD shipped to your FFL

Vortex Viper PST gen 2 5-25 FFP EBR2C reticle with original box -$700 shipped

Vortex Viper PST gen 2 1-6 MRAD with original box $400 shipped

Aimpoint PRO, super clean no scuffs but no original box $375 shipped.

Bought new 3 months ago. Awesome LPVO. Mil reticle. $SOLD shipped in box. Mount and red dot not included.

Login to view embedded media

And

Login to view embedded media
In the last few days some massive numbers of automatic and light and heavy machine guns have been sized . All cartel related
This on top of the 180,000 thousand rounds of ammo from last week .

Almost sounds like the logistics build up of type of campaign. Something to keep an eye on for sure

Selling a Tier 1 36mm cantilever mount. 1.5” high. 20 MOA.

Cleared both a ZCO 420 and Kahles 328i

Comes with original packaging, torx heads, diving board and 45 degree offset top rings


$260 shipped
PayPal, Venmo or Zelle

Pulled off new uppers

Huxwrx (1/2-28) SOLD
Dead Air (1/2-28) SOLD

Spuhr A-0003: Picatinny Rail, 55mm, 2 Hole​

SOLD

XLR Element 4.0 Long Action (3.850) Rem 700 (Clones) Right/Left MG Chassis With C6 buttstock, thumb rest , MDT Grip, extra recoil pad, homemade bag rider.
5 CIP (3.850) magazines: 1 5rd 308, 1 3rd 308, 1 3rd 300 win mag, (Accurate Mags)
2 MDT 3rd polymer 7mm PRC.
2 LRI 5rd mag filler block,
1 MKM mag extension. asking $1100 obo. Can separate.

ARC M10 scope rings 36mm Med height 28mm (1.10) asking $100 obo.

Terminator T1 muzzle brake threads are M13x1.25 Browning x-bolt (.284 through hole bore) asking $100 obo.

**SOLD**TriggerTech Diamond, Rem 700, right safety, flat skeleton shoe. Asking 200 obo.

Triebel Full length resizing die, Triebel Benchrest Seating die, and Benchrest neck sizing die. Creedmoor Sports, the US distributor, is not going to resupply their current Triebel inventory so just wanted to inform anyone interested. I bought the 3 die set from someone on here a week or so ago and wasn’t aware of that so I want to be up front and honest. I assume parts can be ordered from other places in Europe if needed. $320 shipped for all 3 dies and forms of payment are Venmo or Apple Pay. I will sell as a set or individually.

I did contact Triebel directly and was told they would sell directly and one of the issues is the tariff situation. The seating die has the correct stem for 6.5cm and I used it last night to seat Berger Hybrid Target bullets and know it works with Hornady ELD Match also. If for some reason you needed another stem you'd have to order from Triebel if Creedmoor Sports doesn't currently have it.

Wanting to trade/buy Gray Ops Bag Stop original for the shorty version.

Plenty if XM7s getting issued and legit complaints surfacing.
Army dude tried to document a few things. Sig is dismissive and condescending.
Interesting read.