Brand new - never touched a barrel or stock. Stag Pursuit action, manufactured by Aero Solus. Runs prefits, comes with the trigger hanger and everything else from the factory. Confirmed with Aero via email that the bolt faces are interchangeable between Pursuit and Solus, so you have the option to jump up to 308 bolt face stuff too. Same short bolt throw.

$675 shipped to your FFL

I believe the A1 just added an MLOK handguard and 2 additional color options...

Upgrades to me would be a handguard with an integrated ARCA rail (low hanging fruit), and obviously a way for the user to change barrels as simplified as possible. The M10 is coming on 15 years old now and I have to think they've had a few ideas since then. I for one keep thinking I'll see something from them at SHOT every year...will 2026 be the year?

Factory 24” barrel that got chopped to 18”. WinTac Bartlein blank, DE color (I think), scufs on the barrel finish are present. Needs a cleaning. About 2k on it but still loves 175s. $375 shipped

Fits AT, AX, ATX*, ATXC*

*double check minimum length

URSA NorCal - Sunday, October 19, 2025

Location – Clear Lake area (same as prior, coordinates 39°14'21.0"N 122°50'50.0"W)

Setup will be done late Saturday or early Sunday morning by our NorCal crew. Target(s) will be in place at minimum 2000 yards. IRIS hit-indicators will be in place and be the sole control for official hits and misses. The initial target distance for NorCal is 2147 yards, all California-legal firearms and ammunition are allowed, no weight restrictions, and no fees.

The Match Director will decide how many shooters need to be signed up to move forward with this event. Unless the event is formally cancelled (as announced on this and other posting sites), assume it is going forward.

IF you want to shoot multiple rifles, you need to complete a registration for each one. If you expect to be shooting with us more than once, I suggest you do yourself a favor and build a text file in your word processor and then just copy and paste. NOTE: IF you seriously think you will score 5 in 10 or better, please DO take the time to enter ALL the info requested in the Build Sheet section - will save me e-mailing you to get missing info and hasten getting results posted on the URSA site (News and Stats pages) and the non-Cal Guns sites. Thanks.

If you want to shoot this event, you MUST sign up ONLINE (see below). Registrations MUST be received no later than 1 PM the day before the event. There will be NO onsite registrations. Registration is required for all shooters, spotters, and anyone that will be on or in the general proximity of the shooting line. NO exceptions!

The URSA Official Course of Fire is at FAQ 13, near the bottom of this page on the URSA website - https://unlimitedrange.org/ursa-operations-updated-6-10-2025/ All shooter should review the course of fire prior to arriving at the venue. Substantial additional data regarding URSA events are included on the same web page.

Sign-Ups: URSA uses the online program, Zoho Forms, to capture shooter Liability Releases and Build Sheet data, and spotter/other Liability Releases. Liability Releases are signed and dated at the event – we bring copies of the submitted forms, you sign and date them. Please use the appropriate link on the home page (https://www.unlimitedrange.org). If you have any problem with the online form, please e-mail me ASAP ([email protected]). BTW, the form asks for limited “address” info (only city, state, and ZIP), we do NOT need your street address.

Lightly used with the standard bolt face for 308, 6.5CM, etc. Includes the action wrench.

$650 shipped. Add $175 if you want the Timney 2 stage trigger.

AR-15 in .223, going from 16", to 14.5", to 12.5" etc, where do reliability issues come into play, if at all? What other issues or considerations? Does the lower need to be re-sprung and/or buffer change? Let's assume factory geissele complete 14.5 and swapping a factory geissele upper in 12.5 or shorter (+nfa). No suppressor. Thanks!

Selling a super accurate CZ 457 with a heavy 22.5" Benchmark 3-groove, 1-16.5tw barrel. Barrel diameter is 1.18" at the action with a very slight taper to muzzle. This action has been threaded, so barrel is not a slip fit.

Action comes with Area 419 30moa rail, L3i magwell with extended release & a Timney straight shoe trigger. The bolt has been upgraded with a Petes Pillars reshaped firing pin and stainless cocking indicator.

Asking $1600 shipped to FFL.

Excellent condition, all accessories for scope & mount included.

$1600 shipped
Zelle for payment

* Not interested in trades

Nice pair of Japan built 10x40 Nikon Monarch Binoculars. They have the standard threaded hole to accept common mounting stud from Outdoorsmans or Vortex for tripod use.

Asking $175 shipped conus

selling a lightly used Geissele 12.5" Super duty upper. It will ship in the original box. Comes as it did from the factory. Round count is 3-400. Shoots well, no issues just don't use it much.

Asking $1000 shipped

• Caliber: 5.56 NATO
• Barrel Length: 12.5"
• Barrel Twist Rate: 1:7
• Barrel Construction: Cold Hammer Forged, Chrome Lined
• Handguard: 10.5" MK16 Super Modular Rail, M-LOK
• Gas Block: Geissele Pinned Low-Profile
• Muzzle Device: SureFire 3-Prong Flash Hider
• Charging Handle: Geissele Airborne Charging Handle
• Finish: Desert Dirt Color (DDC)
• Part Number: 08-545S

Brand new in the box. Comes with the remote

$200 shipped

Zelle or cash app for payment

Used but good condition Finnlight in 270 Win. Some wear on the soft touch finish.

Near Mfg 10 moa picatinny rail. One extra mag included. Couple hundred rounds maximum on this rifle. Sling and bipod not included.

$850 shipped to your FFL.

BT46 Bipod
Hawk Hill Talon feet
RRS lever clamp
$300 shipped

Excellent condition Fierce Edge (Sako 85 clone) in 300 win mag. No more than a couple hundred rounds on this rifle. Extra magazine included. Sling not included. Shoots Barnes TTSX and LRX very well.

$900 shipped to your FFL.

Hoover tipping die with 7mm and 30 cal
Sleeves and punch for Berger 184 Hybrids $250.00 sold
Hoover meplat trimmer with 7mm body
$115.00 reduced $75.00
Sinclair bullet comparator and micrometer stand $90.00 sold


Prices are not shipped

Good evening everyone, I wanted to know if anyone is reloading the new Lapua .308 Win 175 gr Max Range Target OTM GB581 bullets. I need to know the overall length of the bullet.
Thanks in advance.

I have an AT with the low rail (non - night vision).

Indexing off the pin that goes through the bolt safety shroud, I'm getting exactly 1 inch.

I was sort of surprised that this was the same measurement I got with my Tikka T3x rifles, with that particular aftermarket rail that was installed on them - considering the difference in maximum barrel thickness (1.15" vs. 1.22"). Probably need to recheck the measurements with the scope removed one day.

What measurements are you getting?

I did a search and didn’t find any threads really getting into the different current NV binocular offerings. Depending on my divorce and tax situation in the next month I may be looking at a pair in the near future. I don’t need absolute best, but I don’t want observably inferior units to save $1500. I’m pretty sure I want aluminum housings and I like the Manticore R. Based on the resounding reps I’m thinking I’d like L3 Harris tubes. I plan to go to a couple reputable dealers before plunking down money and fortunately there is a very well regarded dealer in the next county over. On of my huge questions would be the focus on FOM. They have a couple nice tubes. One with an FOM of 2200 and another with 1700-1800. What are the chances I’ll notice this for roughly $1500? My eyes are definitely not as good as they were, but I still don’t need glasses. I plan to do some night time run and gun stuff with some local guys and I plan to use these at every opportunity including non-FA related. I’ve already set up my NV rifle in 300BLK out with an Eotech EXPS3 on Unity riser and Holosun Iris 3. Please share any and all experiences and opinions you have. I’m looking at spending between $8500 - 10k on the units and hope to do a package deal with the mount, bump helmet, ear pro and helmet mounts etc. I’m thinking Sordans have a good rep vs cost ratio.

These are what I’m looking at. I love the on board IR illuminator

-Fat bastard muzzle brake 3/4" thread used *sold*
-Area 419 .30 CAL HELLFIRE MATCH gold muzzle brake $150 (they ran a short sale on them) brandy new, never used *sold*
-short foundation arca rail *SOLD*
-6 BRA dies, one is a original SAC sizing die, and the seater die is a Whidden Gunworks micrometer seating die *sold*
-22GT dies, they were 6 GT dies originally but the guy i bought them from on here changed them to make them work, which they do. The sizing die is a whidden gunworks bushing die, and the sizer is a forester benchrester die. *sold*
-mantis x10 elite *SOLD*
-Hornady seating stem, 6mm. $10
-RCBS beam scale and trickler $50
-Wiebad micro fortune cookie *SOLD*
-AREA 419 shmedium with heavy fill *SOLD*
-Crosstac rear bag *SOLD*
-Berger 85.5 grain hybrid target 600 projectiles (500 from same lot, one of which has 90 projectiles in it) *sold*
-180 Hornady Match BTHP 105 grain projectiles same lot $40 for both boxes.
-MDT CRUSH IT STAGE TIMER *sold*

ALSO I have a Defiance Tenacity short action forsale too

All prices are shipped.

As new, lightly used

$280 shipped for both
PP F&F

Bought this secondhand, but decided to go a different direction
See pics for condition

SOLD

Sako green Alpha fore end for KRG Whisky 3.
A few small blemishes from the safe, but in perfect condition otherwise.
Never used anywhere but the range. Had an arca bipod on it a few times.

Really liked the product, just prefer the enclosed KRG for my needs.

$300 shipped conus.
PPFF Venmo

Login to view embedded media
Hey guys,

For sale I have a 40L 22” The North Face Base Camp Rolling Thunder and Osprey Daylite toiletry bag.
Both items are in very good condition and come as a bundle. This bag is perfect for carryon on a plane and extremely durable and well-built

Also in CAG color scheme

Asking $80 for both. Will ship ASAP

I was very mad I missed out on the SPR barrels on Geissele's website. @Bigjake83 did some cool stuff with them.

So I called White Oak and Marylee did right by me.

Geissel cut rifle barrel blank
18" SPR profile with half fluting spun by White Oak Armorment. 1-8 tw and mid gas.



Barrel is beautiful. The workmanship is amazing. I was worried about white oak under new ownership but this looks amazing.

I used a Thouroghbred upper, Mk4 rail, and superlative gas block.


Optic is Leupold 3-18 in a badger mount
Lower is a m4e1 with a curved TT diamond and JP captured buffer. Fab defense stock and kungfu grip.





White oak believes that break in should be enough rounds to zero , or about 25 rounds, a good cleaning, and done.

I really planned to do that, but it was going so well I kind of lost track.

Im really impressed.

Groups and shooting reports to follow

I ask because I am looking at some heavier copper solids for reloading but don't want to be wedded only to them. Based on the bison ballistics calculator a 8.5 twist would let me stabilize the range of bullets I am likely to use.