Restocking rarer calibers:

Norma 284 Win Brass: $74.95 / 50 ct

Norma 460 Wby Mag: $109.95 / 25 ct

Norma 500 Jeffery: $119.95 / 25 ct

Norma 6.5 Japanese: $59.95 / 50 ct

Norma 375 Flanged Magnum Nitro Express: $139 / 50 ct

More good stuff coming soon. 300 Norma Mag is still 60% off as well:

I have a Forster 6mm BR Ultra Micrometer Seating die and a Whidden 6BRA FL bushing sizing die with a .270 bushing. The sizing die does not have A decapping rod.

I reloaded 6BRA with these with excellent results. Dies are in excellent shape. Come in a

SOLD

Magpul PRS Lite. Black. Like new.

$85 shipped. Paypal preferred.
SOLD

Lapua 308 brass. 1x fired in an AI rifle. Large primer. 97 pieces. Tumbled, ready to prep/load.

$70 shipped. Paypal preferred.

Ok, so unlike a semi-tone kind of life, I'd like to figure out recommendations on an optic for a PRS rifle I'll be building. Right now, all of my optics are more budget. I've got a few Athlons (2 x Cronus - though one is the LPVO and Ares ERT), a Trijicon Accupower (LPVO, but I like it better than almost any other LPVO, including hte stupid Accupoint), a Vortex LHT - lovely glass), and some cheaper crap I'm not bothering to list (and like a gazillion red dots and magnifiers). But I'm looking for advice on the best optic I can get for sub-$2k (with a normal sale, not a freak once every 15 years sale). My priorities are eye relief and clarity of glass in the center. Less worried about CA, specifics of reticle (any tree will do, and to be honest, I'd be fine with a perfect german + reticle with marks in mils, I tend to dial windage too).

I know this is ambiguous, but I just can't see myself ever going for the top glass (I'm too cheap value minded).

Cheers!

EDIT: Not looking for used. This is street priced. Obviously if I somehow found a $3k+ optic on sale for $1900, it would be a no brainer.

Hello all,
I’ve got a Nightforce NX8 2.5-20x50 F1 for sale. Mil - C reticle, Illuminated, Zero Stop. It'll come with everything pictured (scope, sunshade, caps). If there are any questions please let me know. I want to tinker with another scope this year, probably another NF so this ones up for sale. I tried to take detailed pics, glass is hard to get a good look at in pictures but both ends are in great shape. I also have some Hawkins High rings up for grabs if you want to make me an offer on those.

$1600 shipped to the lower 48. I'll cover shipping, you cover fees if using PP G and S.

Bought one of these units for $270 back in 2020 or 2021. Used it for a couple years. It was decent... Resolution was +/- .1 grain. Nothing too fancy. But it was easy to clean and empty out powder and change to a different one. Pretty user friendly.

Then it shit the bed on me. I suspected the load cell went bad. Figured I was up the creek and set it on the shelf, bought something else, and moved on.

My wife, being the frugal person she is, asked me about it a few months back. I told her it was shot and dropped the issue. She emailed Lyman and told them the issue. They told her they had had some issues with load cells and wanted us to send it in.

So we packed it up and shipped it back... At our expense... And I was skeptical about what would come of it.

Lo and behold, it arrived in the mail today. Load cell was replaced and the unit was tested and they included the test documentation.

So, I had to pay shipping one way. But Lyman stood behind their product. Fixed it. And shipped it back to me.

In today's market I didn't expect much. But I felt it was fair to give Lyman and their customer service credit for standing behind their product.

Mike

A buddy was just telling me that LPM released their Muzzle Brake End Cap today... looks like they're offering them for their LPM cans, Dead Air & showing the OCL Infinity coming soon. Hadn't seen any mention of it here yet but might be of interest for the PRS/comp guys!

Im in the market for a whole new precision setup. I've only previously reloaded straight wall pistol on a 650 so this is process I've never had to implement.

An annealer is one piece of the puzzle that I am planning on getting. Particularly the AMP Anneler.

Just saw this being listed on a few reloading vendors.

ARC Precision Ultimate Annealer​

Login to view embedded media
Anyone have any feedback on this unit? Exciting times these days.

Sitka Gear Goretex, OptiFade Full Camo Suit, with Cap. Brand New.

Jacket info;

Pants info;

Core Midweight Zip T info;

Ignore the colors/patterns shown in the above Sitkagear website links. The patterns/colors of this listing are as shown in the pictures below.

Men's XXL/42 Regular.

Never been worn, other than for fitting. No stains, rips or tears. Please see pics for details.

There's close to $650.00 worth of gear here, at retail.

$350.00 Shipped and insured via USPS Large Flat Rate. Price is for for complete set, will not split. Zelle strongly preferred.

Please PM me with questions or if you wish to purchase. For your protection, please don't post any of your personal information on this thread.

I just picked up an AAC Tirant 45M and the piston spring that came with it will not fit around a M16x1RH AAC piston. In addition to that, the piston itself has threads so deep/long that it actually touches the face of my MK23.

I looked around online and found that a Silencerco piston spring will work on the AAC. So I grabbed a spare spring I had from my Octane and it does indeed fit and everything screws together correctly. Which is how I saw that the piston hits the face of the MK23.

I compared the AAC piston to the Silencerco version I had and they appear to be identical, except it’s actually physically longer but has a shallower thread. I put the Silencerco piston and spring in the AAC and everything tightens up as expected and the piston does not hit the face of the MK23.

So my question is, is it ok to use this configuration? I can’t find anything online about it other than the spring being ok.

Both have around 200rds on them. No pins with the Clavin Elite.

AR Calvine Elite - $225 $200 $150 Shipped OBO SOLD

T3/T3x/T1x - $140 Shipped. SOLD

KAC Knight's Armament SR-25 16" 7.62/.308 upper, about 400 rounds fired, taken off a complete SR-25 purchased in late 2024

I don't need the temptation in the safe for this to spawn a whole 'nother SR-25 with accoutrements

Area 419 High diving board and bubble level.

Only want to trade the diving board for a low one.

Bubble level I’ll sell for $35 shipped. Comes with bolts.

$700 shipped.

MRAD EBR4

Reptilia 1.54" Black

BC caps

Cat tail

Optic was brand new in box when I painted it a few weeks ago, lightly rattle canned. Mount was used and so was cat tail. Fantastic optic bonus t want more magnification.

Trade towards Mk6/MK5 18x with Tree reticle.

For sale is a black 26" 6 Creedmoor barrel taken out of my new AT-XC, it is unfired (except for whatever AI does with them to proof at the factory).

Location: Texas

Price: $700 shipped Ground to lower 48

Trades considered- Similar condition 20" or longer .308 or 6.5 Creed AI barrel, ideally dark earth color

Shipping negotiated all depending on what you want

Forster 308 Neck size die
#006621 $60

Forster 308 Seating
Benchrest #006251 $45

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.
I have a new never used

Primary Arms SLx 1X MicroPrism with a Unity Mount with QD lever. Red ACSS Reticle. It has a Multicam ranger wrap on it to protect the finish. Never left the house. It also has a PA ARD for it and the box with all of the OEM parts - $old​

Lightly used Pixel's on Target Voodoo M L (M with onboard pointing laser, Tan IR & Vis Green )
$19k
Personal check or money order (paper instrument that will clear) shipped / insured to CONUS.
Manuf date 10/23




PM if further questions.

Used for about 6mos.
Excellent condition all around
OEM harness was a *** and broke in the cold.
I'm including a great condition Alaskan Guide harness
$old

Looking for a 300 WSM proof carbon for an IMPACT SA

Snowy Mountain Rifle Backcountry full length arca for Manners LRH. No issues.

$55 shipped. Can accept most payment methods.

As the title says, just looking for another LT845 with a diving board. Willing to pay $350. Salt is fine.
Thank you.

Hello all

I’m thinking about switching out my Nightforce Atacr 4-16x42 to a 5-25x56 for hunting. I’ve used the 4-16 for a bunch of years now and killed a pile of critters, but lately I’ve felt like I’d like to have a little more zoom. I know they aren’t very light, it doesn’t bother me though. I’m in somewhat decent shape. I’m also a big fan of the Mil-R reticle.

Do any of you use the Atacr 5-25 for hiking and hunting? If so I’d sure appreciate some feedback back.

Thanks in advance
Bob

In perfect as new condition, just a couple months old.

NF 4-20 ATACR comes with Hawkins ultra light rings 1” with offset bubble level plus all original packaging and accessories.

$2,475 shipped
2,375 shipped no rings

Open to face time or texts or whatever makes serious buyer more comfortable with transaction.

PP F&F or GS (fee on buyer)
Zelle
NO TRADES