Defiance Classic action
Never been fired or had any barrels in
.223 bolt
will accept Ruckus pre-fits
$650

Only used 2 times otherwise been sitting in the safe. Will come with aftermarket cover.

$215 shipped to lower 48

26” 6 CM factory heavy barrel.
Approx. 600 rounds down
$1800

am thinking about a CZ 457 their prices are best on line. not insane low but lower than avg. thus,my suspicion and question. are they legit? scam detector web sites are not encouraging and their phone # is missing the last digit. anybody got an clues?

I'm selling my Pulsar trial 2 lrf xp50 thermal. I bought it two years ago and only been in the field once and on the range once or twice. It's become an expensive paper weight, I just don't have time for it.

Comes with a pulsar qd mount, storage bag, and everything that came with it originally. Nothing wring with it, in great condition.

Pm me your offer

Like new TriggerTech Primary trigger with 100 rounds on it. Right Hand and No bolt release. But I do believe you can contact TT and get a bolt release for these.

$SOLD shipped

PayPal Friend/Family Accepted

Hi all, checking in here with hopefully a pretty simple/dumb questions. I’m trying to change the pin on my FW Arms Auto Center Decapping Die and can’t seem to get this thing disassembled. I’ve been trying to hold it by the nut around the body and turn the nut on top, but can’t seem to get any movement without applying a ridiculous amount of force. I don’t want to go any further without being sure that’s correct, as I don’t want to break it. Is it just stuck and I should apply some PB Blaster or WD40 to it or is there any way to disassemble it? Thanks in advance!

Vortex Gen 3 Razor
EO Black Limited Edition
EBR-7D MRAD reticle
Non Locking Elevation mod installed by Vortex

Ships in original box with:
Vortex sunshade
Vortex flip up caps
Mag throw lever
2x turret keys
Manuals
Vortex lenscloth
Obnoxiously large Vortex bumper sticker

Glass looks perfect, no mounting rings, no scratches or dings. Scope looks LNIB. Just back from Vortex for a check up, all GTG.

$old shipped/insured via UPS. PP F&F/Zelle/Venmo.


Due to scammers, you must PM me first. I will not PM you first. If someone does, they are a scammer.

EO website specs

sold, pics removed to deter scammers

I have recently purchased a M22 TCM rifle with the intent to convert it in to a 9mm rifle akin to the 9mm Novems that used to be made off the rifle.

I have been calling gunsmiths and no one seems to be willing to take on the job of fitting my barrel blank to the action threads, chambering it, and adjusting the feed block in the front for 9mm feeding. I am not sure it will need it, but some of these require a new extractor to be made in order to be of proper dimensions for reliable extraction with 9mm cases.

If anyone knows of any smith who has done or you think could take on this oddball project of the conversion, I would be in your debt. Willing to ship nationally in order to get solid work done, and I will be willing to pay more than the rifle cost me to do so.

Thanks all!

Like New. Great condition. All original accessories and box included.
Priced to move at $1725 Shipped and Insured.

PP via gift or Venmo accepted. Message me any questions

Jimmy

So mate is going to sell his .270 .
Hes in the market for a new rifle .
Bergara, tikka , springfield arms , savage he,s thinking .
He likes my Sako 300 win mag , and my mossberg 7mm prc . But he wants to know about the 300 WSM ....
What he is actually after is something that has the power to deliver a fair whack out to (say ) 600 mts , because my rifles can do that , and sometimes i do shoot that far . ( on his place !) But where as my rifles are full length magnums hes after a "shorter " barrell (say 20 inch ) for the roar as his new bush rifle thats capable to shoot out to 600 mts .

So, whats the story with the 300 WSM ?
cheers
les

I recently purchased a scalpel in 6.5cm - a friend gave me an old box of 120gr AMax (no longer in production) which shot one ragged hole.

Of course it did!

Anyone already tried all the different brands and projo weights to see what the scalpel barrel likes best?

* SOLD * Very lightly used LabRadar. Comes with the custom soft case AND a piezo trigger that brings the frustration factor WAY down when shooting suppressed. Even works with .22s and air rifles! $199 shipped. Venmo, PPF&F, other methods may be arranged. Please PM any and all communication vs. posting here and opening yourself up to scammers. * SOLD *



Stuff I’m always looking for (whether you want my stuff or not):
APA Tru-Loc scope rings - 30mm .856"
Nightforce C550 ATACR 4-16x42 H59
Nightforce C644 ATACR 4-20x50 MilXT
S&B 4-16x50 cm ccw only, P4F or G2XR
Dillon carbide size/trim dies, 5.56 & 300 BLK
Harris S-BRM bipod
Factory Sig P320 full-size 1/2-28 threaded barrel
Emerson CQC Folder
L Reg surplus GoreTex

Other stuff I'm selling:
Sig P320 AXG Combat
TA01 4x32 ACOG
Ferro Concepts Bison belt
H&K PSG1 trigger
Timney SCAR 17 trigger
Misc cleanout

Hey all,

Loading for a factory REM 700

Using Hornady modified case and OAL tool. Using the tool to find my jam point and I am getting a number of 2.802. This is holding the case firm into the chamber via the rod the case mounts on and sliding the bullet until contact, tighten set screw and remove case. Bullet sticks in barrel but a small tap on the side of the stock below action frees bullet.

Using this 2.802 measurement I have my seating die set for a .020 jump and I have my finished cases sit a CBTO of 2.782

This is giving me a OAL of completed rounds that are 3.444. This is nearly .105 longer than the max OAL according to the books. Has anyone ever had something this extreme?? I have shot rounds at this measurement and have chambered and extracted them without sticking a bullet.

This got me thinking as it seems extremely long. The other day with the bolt stripped for the gun and checking the fit of some brass I tried the 30-06 modified case for shits and gigs. The bolt wouldn’t close on the modified case without some good effort. I then compared the modified case to a factory Barnes load and to my sized cases.

The distance form the base to in which the shoulder starts at the top of the body on the modified case seems quite a bit further forward (longer) than on either the factory loaded Barnes or my sized brass. Both the Barnes and the modified case measured 2.044 case base to datum using the Hornady comparator. The Barnes case would however allow my bolt to function relatively free while stripped.

If the shoulder junction on the modified case is keeping it from going as far into my chamber wouldn’t this give me a longer CBTO as the bullet then has more distance to be moved until jam point while using the OAL tool. I was thinking I had a .020 jump but now I’m wondering if I am a lot closer to or even potentially jamming.

Attached are a couple photos. One is a dummy round, loaded Barnes factory load and the modified case. Others are datum measurement of the modified case and Barnes load, OAL and CBTO on the dummy round.

Thanks Alan

I acquired these Fowler 68 grain bench rest bullets

Packaging says 1000 pcs but not %100 sure.

I

As title states. Trigger in good shape. Flat face, black, two stage. Rem700 pattern.

$175 TYD, PP FF or Venmo.

These are the 4 screw ultra light, lowest ones they list at .885”. 30mm tube

$125 TYD, PP FF or Venmo

As title states. Zeiss V4 4-16x50. ZMOAi-t30. Illuminated reticle. Exposed elevation and capped windage.

Glass is in perfect shape. It comes with a Zeiss throw level. It’s a fantastic scope, just overall downsizing my guns.

$800 TYD, PP FF or Venmo.

Razor Gen III for sale. 6-36 power. MRAD. It’s been lightly used. I would describe it as very good condition. Comes in the original box, with original booklets, throw lever, and sun shade.

$2200 shipped in the continental U.S. PayPal F&F or buyer pays 3% for G&S.

Sold

Bought on here a while ago and rarely used.
In excellent condition.
Will ship to your ffl in a padded Sako case.
Must accept from a private seller.
$1100shipped.
$1000 shipped minus scope and rings.
Mike 303-828-6996 Woodstock GA


Item Description: As new
Tikka T1x
KRG Bravo chassis
Athlon Argos BTR gen 2 scope 6-24 x 50 mil/mil
Custom throw lever
Warne Precision steel scope rings
DI 25 moa rail and bolt handle
2 x 10 round mags
Arca rail
Threaded barrel
Etc
Bipod and Arca rail attachment not included at this price.

Like New Custom 22 Creedmoor build from Wolf Precision.

Build sheet with all specs attached. Paid $4,850 for this build and asking $3,900 OBO.

Only difference from build sheet to current rifle is a swapped grip.

80 Rounds of Ally Ammunitions 75gr ELDM is all that the gun has seen.

7.4 pounds as is right now with no chasis weights.

More pictures available upon request as well as open to FaceTime etc.

$1,400 shipped

Brand new in box Tangoinnos FIRE4000 Weapon Mounted Laser Rangefinder with Applied Ballistics

OLED display
Vertical and Horizontal screen for more mounting options.
Uses 1 CR123A
Comes with a wired remote

Looking for a Havit Hit