I'm looking to purchase a stock for a precision project with a M700 or clone action and am considering a Boyd's stock. I always epoxy pillar bed my actions with homemade 1/2" or 7/16" diameter aluminum pillars. Boyd's offers installing pillars on an ordered stock for an additional $68. I can't find any info on their website with details of this service. If these pillars are well installed and functional, $68 would save a lot of work. Has anyone had this done that could provide an opinion and/or images of their pillar bedding job? Thanks.

Work done by Smoky Mountain custom rifles. Weighs just shy of 8 pounds bare. Excellent condition with approximately 200 rounds of factory ammo on the barrel. Rem 700 Trued action, bartlein 3B barrel at 26 inches chambered for the 195's, Timney trigger, egw scope base, sitting in and AGW CF stock.

$1600 shipped from me to your FFL. Can also meet near Ashland Ky or ship direct to you, if you are a resident of the great state of Ky. Bipod and scope not included. May consider trades. Currently looking for a 5-25 or higher power ffp/mil optic, desert tech SRS barrels/accessories, HK stuff, new 6 dasher or 338 norma brass, med Palma or similar 6 and 6.5 barrel blanks

I need help selecting a 22 GT (or maybe 22 CM) shouldered prefit.

It will be primarily for calling coyotes. Planning on 18” length and using bullets in the 65-80gr range.

Twist rate: 1:8? Would this be ideal for my chosen bullets? And maybe still shoot decent if I did load some of the 52/53 gr?

Bore diameter: .218 or .219?

Rifling: 4 groove, 5R?

I’m planning to go through either PVA or straight jacket armory mostly because of the ease of online ordering and I’ve read enough good things about both.

Barrel MFG options I’m looking at are PVA osprey, CRB, Bartlein, and just the standard tier 1 match prefits from SJA (not sure what mfg blanks those are using).

I’m sure they’d all shoot great but if I’m about to spend $800-900 on this barrel I want to get it right the first time.

Hawkins precision 1 piece tactical mount with bubble level.
34mm, 0 moa, 1.27 height
Sold
Pm if interested

Hi all

I just joined this forum to explore this knowledgeable forum & to enhance my skills & expertise.

Regards

Hello folks,

New guy here, live in the greater Boston area. Just starting to get my feet wet with Long Range and excited to learn from the content here.

I have just one AR so far (MCX 16") and my plan is to pick up an LRP-07 shortly to get into longer range precision shooting. If you are in the greater Boston area, send a shotout, i'd love to talk shop with folks more knowledgeable (or hell, evein the same boat) as me!

…Outside?

Local coffee shop and several of us old guys have a hard time hearing each other at our table.

Some tourist comes in and starts yakking on their phone in their outside voice at a nearby table.

They get the War Chief treatment. Full blast. Works every time .

Login to view embedded media

My Native Brothers

Anyone have some Alpha SRP 308 brass they might sell??? Thanks.

104 pcs Peterson SRP - $85

93 pcs Hornady SOLD

$85 TYD for Peterson via Venmo/PayPal. Ships USPS with tracking.

I’m not gonna use so figure someone may. New never opened.

$55 TYD via Venmo/PayPal. Ships USPS with tracking.

TS Customs 22 creed. LP Fuzion Ti SA. XLR element 4.0 magnesium chassis. 20” Benchmark carbon, threaded. Trigger tech special. It’s brand new, never fired. Just been sitting in my safe for the last year. Selling to fund another project. PM for more pics and info

Vortex Razor HD Gen II, 4.5-27x56 FFP EBR-1C MIL reticle. Sunshade has been machine milled down about 1.5”. Like new condition. One small nick (pictured) by magnification dial.

*Includes*
-Vortex throw lever
-Accuracy 1st bubble level
-Seekins Precision rings

LMT MARSH Battle rifle. 13.5" 308 barrel. Trigger was swapped to a geissele. Comes with the surefaire warcomp (its not pinned). About 2 mags through this to test it out. I have both a facotry and BRT Gas tune tube

$2900 Shipped

Up for sale is my RimX build, pre 2000 serial. Going a different route and focusing more on centerfire.

• 22” 1:16 ACE Blank, finished by Manzella with Eachus chamber
• TT Diamond single stage flat trigger
• Spuhr SICS chassis with adjustable bag rider and 6x external weights
• 1x RimX mag with +5 extension

Rifle shoots CenterX sub .3 consistently, I’ve been shooting Eley Match around .3, have Eley and standard extractors, extra tensioners and small parts as well. Rifle is balanced pretty much perfectly as it sits, I’ve shot 2 matches with this setup and the SICS is easily my favorite chassis.

Barreled action with mag only $2000 shipped
Complete rifle as seen $3500 shipped
PayPal F&F, Venmo F&F only
Rifle is truly a no excuses setup, I jumped in head first to rimfire and want to devote more time to centerfire.

Please, no trades.

Stated title. Looking for an AI AT full rifle post 2014 preferred, or the AI AT 308 left hand bolt as a spare.

I can't count the number of ways we are winning.

1. Throwing that utter POS Al Green out for being disrespectful was just awesome. I would have taken that gold headed cane and stuck it up his ass after beating him to a bloody pulp
2. Watching Pelosi not knowing what to do.
3. Watching the Democrats with their little protest signs. I bet David Hogg thought that up
4. DOGE!

List your favorites

I have been shooting a Bergara for NRL 22 and want to upgrade to a Vudoo eventually but don't want to spend that much at the moment.... So I was thinking I could buy the chassis now and use it for the B14 for now, then get a Vudoo Barreled action later.

Not sure if that's the best plan, but seems logical while sitting here with my 1st drink of the night..

I would like to know what more experienced shooters think and then which chassis... I was looking at MPA and MDT but don't have any experience with either but I really want to look cool, even if I don't hit anything.

Has anyone reloaded using 308 federal gold medal brass? I have access to an absolute ton of it from work (swat sniper team). It doesn’t appear to be crimped either.

Anyone with experience reloading it? Worth it or no? I don’t have a 308 barrel, but I’m debating it just to use this brass.

Gee I guess if it was actually housing migrants it would have been totes worth it

Login to view embedded media

Looking to sell my zero compromise 527 with mpct2 reticle, scope has 15mil locking turrets, comes in hawkins heavy tac rings 1” height, it is wrapped with black multicam ranger wrap, and has objective and ocular tenebraex caps. The scope is in great condition, aside from some scuffs on the windage turret, which is only cosmetic, and does not affect performance. Glass is mint.

Looking for $3500 for everything or $3300 for scope without rings. Price is shipped and insured, payment via paypal f&f


Sold!

Looking to sell my XLR TR-2 buttstock with bag rider, this is basically brand new, length of pull from 12”-15”.

Looking for $250 shipped payment via paypal f&f or zelle.
Sold!

I have a left handed zermatt origin action, proof s.s. pre-fit in 6.5cm, Triggertech special trigger, acc elite chassis. Oss 7.62 hx qd suppressor. Using hornady 140gr match, h4350 (39.8gr) so not a high velocity load (2720s), cci #200, alpha ocd LRP brass about .002" shoulder bump. I will randomly get heavy bolt lift and when I do the neck of the brass extracts dented in. Thats with slow extraction so the denting is happening during initial bolt lift or during chambering but I've sat there and cycled loaded rds a ton and they never have issues so im thinking it's happening during bolt lift or something. I can't figure out what's causing the bolt lift problems with no where near signs of pressure. Ive cleaned the chamber really good and it'll be fine for a bit then it'll start happening randomly again but it'll be like one round then no issues then another random rd with heavy bolt lift. Anyone have an idea what would cause this. I just purchased a borescope and it'll be here in a day but I dont think there's anything in the chamber bc its random rounds then it'll extract fine. Yesterday I took my rifle apart so I could see in the barrel and there's wasn't anything wrong with it. I cleaned it really well and rebuild my rufle and it happened again today with random flyers. It just started and wasn't doing this until yesterday. Itll do it even with a clean barrel and like 10 rds through it. Help would be greatly appreciated.
Thanks.

Steel B14R

Modified stock from previous owner. I added the marine Tex and rattle can. It's green underneath.

Triggertech Special

Bergara scope base

2 mags

Caldwell bipod(I think)

$950 shipped to lower 48

Selling my Vortex AMG in MOA. I would describe it as good condition and the lenses are pristine. It shows signs of typical wear (faint ring marks, etc) but it did just get back from Vortex HQ for a deep cleaning. Comes with everything that came in the original box except for the Objective flip cap. Not a clue where that thing went.

$1500 TYD

Apologies in advance if this is common knowledge, but I can't seem to find it anywhere in the CDG discussions.

As a lifetime reloader, I have always been using bolt lift effort and ejector swipe marks (on the case head) as early pressure indicators when working up new loads.

Does the pivoting handle and mechanical ejector (lesser so) of the CDG action prevent me from using these methods, or are there still other obvious indicators regardless of these novel design changes?

Inquiring purchaser wants to know . . .

Thanks