Over 300 officers, incuding U.S. Postal Inspectors were involved.

Modelo sales suspected to drop even further.

Login to view embedded media
Login to view embedded media

.22LR

Melonited bolt & receiver

Black Cerakoted Barrel

416R Stainless barrel, single point cut with Vudoo chamber

20” MTU Contour

Muzzle threaded 1/2×28 w/ Thread Protector

30 MOA Scope Base

(2) 10 round Vudoo V-2210 Magazines

Bore Tech Vudoo Bore Guide

TriggerTech Special two-stage trigger flat

Comes in original box with all accessories

Shoots amazing with SK Pistol and Lapua Center X

$2,000 OBO Shipped FFL to FFL

Paypal F&F

Hey all,

As title states, how do you all clean the area right before the chamber and even the chamber too?

I keep getting chunks of carbon making their way into the chamber and then they fall to the open area before the chamber. I first noticed this when I couldn't get the bolt closed on a live round. It's almost like the round was too big or long. After a minor inspection, I noticed the bolt face had black rocks.

My rod guide goes right up to the neck. So when the patch comes out of the guide, it can't clean the chamber. I have slid the guide back to allow the patch to come out before and open up. I spin around a bit and then drive it forward all the way. But I still have a million little carbon rocks and brass shavings. These are causing issues with not allowing me to close the bolt properly. My fireformed cases are also coming put with deformities due to carbon chunks getting jammed between the case and chamber wall.

Anyone else experience this? It's getting frustrating.



Also, I found these other things while I was in there. If anyone cares to know and tell me what it is I'm looking at, I'd appreciate it.



The 2nd picture in this group of 3 pictures is black fouling but deep down in the barrel. Maybe about halfway in the barrel that starts and goes out to the muzzle. The section before it has shiny rifling so I find this odd.

With how many carbon chunks I was getting in my chamber and bolt face, I thought I was going to have a major carbon ring but it didn't appear that way.

Thanks for any input.

Stalked the forums off and on for probably several years. Finally joined, and my first question is likely rather stupid.

Running a Bergara .308. Got an Omega 300 for it a month ago, and I’m doing some handload work ups for it. Decided to try a suppressor cover, too, and after install, it makes me ask the question if it will potentially affect rifle harmonics?

Sold: ZCO 527 with the MPCT 3 retical it also has 15mil locking elevation turret. Scope is in box with flip caps, scope chap, and is mounted in a SPHUR SR-6002 one piece mount. Modding is the baggy with the Velcro patch, sticker and slot driver ( I bought this used and didn’t get them). Also in the box is something called a 55-DFAT-HD which I guess a dry fire simulator? Will not split, price is $3300 PayPal F/F shipped lower 48.

SOLD!

$450 shipped for 500 pieces. Includes plastic containers.

These are fired once with a light load in a nice tight chamber. This is as premium as once fired brass gets.

Looking for a 100 MOA Night Force wedge prism

Only used a few times

450 shipped

Comes with everything from factory
Except usbc cable I will provide a new one though (I think my child stole it lol)

Can include the ad mount for 550

No trades on this one thanks

Have a ~16.7-16.8lb 6.5x47 rifle that I built purely to shoot for fun right now. This is without a bipod. It's probably my favorite rifle to shoot 100-1k yards right now so I don't want to mess with it too much but maybe I'm missing something here.
However, if I were to shoot at an NRL event or two for fun later this year or next, it would be nice if I could come in under the 16lb limit with this particular rifle. If it's not viable with my wants right now though, it's fine - weight limit or no, I was going to shoot skills division anyways. If I REALLY had to go compete today, I would just bring a different rifle.

Obvious answer but don't want to:
6.5x47 26" M24 contour barrel - it barely meets power factor as is when ~55-60F at close to sea level right now (140gr at about 2720-25 right now) so I can't just chop the barrel down. Don't want to spend money on a new lighter contour shorter barrel in a faster cartridge I like less for skills division.

Viable but not enough:
Remove sunshade + wrap on optic - saves 3oz
Full length Arca - MCS rail + arca weights could be swapped for a shorter rail with no weights - save 3.6oz without weights and maybe 1-2oz on a slightly shorter rail or just chopping it down a bit? (Don't want to cut rail too much due to mounting points on stock + rail is already skeletonized anyways to allow for weights to be inserted).
ATS brake - Yes, I could remove this or put on a lighter brake, but I like the way it shoots with the brake right now - saves ~6-8oz removed, 1-2oz swapped

Things that are probably less viable or won't make enough of a difference, but listed anyways in case I'm wrong:
- Manners MCS PRS stock - weight spacer on the butt end of the stock has already been removed - it's just the aluminum rings as spacers, the rubber pad, and the mounting plate for the rubber pad now.
- Leica PRS scope with Hawkins 2pc rings - I suppose I could remove the diving board from the scope rings and save 1oz there? I don't want to switch to a different optic.
- Hawkins M5 DBM, ARC CDG action, BA trigger, dope card, probably 1-2 more very small <1oz parts I'm forgetting. - Doubt there is much weight to be saved here.

Cleaning out the safe.

I will not DM you first, reach out to me first!

($sold + half of shipping) BNIB Aero Solus Action 308 bolt face.

($sold Shipped) BNIB Zeiss LRP S3 6-36 Mil.

($sold + half of shipping to FFL for full package. $sold just for barreled action) MPA barreled action. Mpa stamped Curtis Axiom with 7 twist 26 inch barrel chambered in 6mm GT. Include 2 MDT GT 10rd mags, ~300 pieces of 4x fired alpha ocd brass, rcbs matchmaster die set, and a 419 hellfire adapter. Barrel has 1300 rounds on it. Will ship in original case from MPA, I am the original owner. If you put it in a mpa esr chassis it does qualify for production class.

Can seperate barreled action and reloading stuff, won't sell reloading stuff til action is sold.

($sold Shipped) Manners TCS stock. Has mini chassis. Used for one season, bought off the hide last year. Has all internal rail weights and will come with 2 rear weights so you can tune the weight perfectly.

Will do trades or partial trades for: Terminus Zeus QC, MDT ACC Elite, 25cal Barrel blank from Proof/Kreiger/Bartlein/CRB

Used ZCO for sale in Spuhr QDP 6002 mount (0 mil/0 MOA)

Have all original box, paperwork, OEM caps, but I cannot find the sunshade.

Scope is used with minor scrapes on the bell but outside of that has been well taken care of.

High rez video link showing scope in 360 view available to those interested please send a PM.

$3450 shipped.

The Kit V2 with Hog Saddles new Turtle Head 1.4 ball head. Took it out to compare to my RRS and I still like my RRS better. It’s basically brand new. No dings, scratches anything. Everything works like it should. Definitely a tripod setup that works well I just can’t part with my RRS.

$750 OBO

I’m looking to buy HLR Origin .150 Recoil lug? Does anyone have one they’re willing to part with?

Guys a scammer hitting up people who post ill take it in there adds beware! Been reported

I have a Sharps Mountain Tripod Office of some sort. It's brand new unused once. It has a mark on the back from something not noticeable from the front, but So pricing accordingly

$85 shipped.

Sold my SCAR and my 2010 project. Have these left over and I need to clean out my garage.
5 x XM2010 .300 win mag mags. Some wear on them. They all feed fine. 250 OBO for all of them

6 x SCAR 20 mags. For .308/6.5. Brand new still have storage wrapping on them. 225 OBO for all 6

New in the box, scope was taken out and was going to mount it and then change my mine about the reticle also upgraded to a ATAR $1850 shipped

So looks like I have settled on a Terminus Zeus full tenon. Since I’m new to the whole world. I’m looking at prefits. I’ll bet getting a 223 Wylde and 6.5. Anyone in particular want to look at?

Looks like TS and Preferred have been popular.

I learned a lot from the last post I did so figured I would cast my net.

Any recommendations for sourcing en bloc Garand clips for a shooter Garand? Not collecting, this is going to be shot like it was made to.

Very lightly used mk5 3-18. Cch reticle, comes with the caps. I can’t find the box currently. A few spots of safe rash as seen in the pics. No mount. Scope and caps only. If I find the box I’ll send it in the box. $1420 shipped.

Impact 737 - purchased new 200 rnds
Not AW cut

2 benchmark 6gt barrels. 1 NIB, 2nd 200 rnds

$2000 for all. Not ready to split up. The only trade I’m looking for is cash.

Mk5 Hd 7-35 pr2 mil reticle in like new condition just got it back from leupold after a tracking issue and they basically replaced the scope, just have enough scopes at the moment. Will come with sunshade and throw lever screw asking $1600 shipped

$875 - Paypal, Venmo, Zelle

Located in Tucson, but will ship FFL to FFL

Less than 50 rounds through it

It's the most recent version and purchased directly through Glock. It has the new/matte finish

Holosun EPS Carry Optic - Green (Mounted directly to the slide, no adapter plates)

Night Fision Optics Ready Stealth Series Backup Iron Sights

Talon Grips - Pro Texture

Streamlight TLR-7X Sub

T-Rex Arms Appendix Carry Holster with Soft Backer

Also comes with 2 Factory Glock Magazines

Used but works well.