Eotech 511
Bought from recoil gunworks
It’s a police or military trade in model
I don’t think these were ever for sale to civilians but not sure
Man. 2002
Works fine



250 tyd

Mtn Gear bipods used for sale. Picatinny Mount. If you haven’t used these they’re the lightest bipods on the market and still easy to get stable. They also extend to 15” and also splay out. Only selling because in have two pair. Shipping to CONUS included

Title says it all!
Use the link below for more information on this giveaway

*SPF*Area 419 scope mount with bubble level
Tube Diameter:34mm
Height: 32mm (1.26")
Cant:0 MOA
$290

Eotech g33 fde magnifier with unity mount .
Original eotech box and mount included.
$490

Question for those that have way more experience in this than me, but we know that in a semi-auto of similar barrel length that you won't get as high of velocity #'s with the same ammo as in a bolt gun.

However do you also expect to see significantly more spread and standard deviation?

So I've had a JP supermatch barreled upper (had two in fact) neither have ever impressed me with accuracy. To be fair to JP, if you dig deep in the manual, they state that these are not designed for max accuracy, but more for reliability (perhaps maybe "supermatch" is not the right name for them then). The accuracy issues seem to be just flyer related, it will stack 3-4 rounds and throw a couple badly, like 1" off at 50yds. I thought I've noticed shooting it that it seemed like perhaps the ignition wasn't great (weak cycling/sounding loads etc.) as the primer hits were not nearly as deep as my CZ or 10/22s. I know AR22's can be trigger picky, so I've tried 3-4 with no real difference, aside that a hiperfire would not even get ignition. Now that I have a garmin chrono for my centerfires I thought I'd do an experiment.

I took 4 different ammo choices: Tac 22, Eley Precision Benchrest, and 2 lots of SK Long Range. I ran 50 rounds of the same lot through both the JP and my CZ 457 with the chrono and compared #'s, same day, same range, same bipod/rear bag etc. I fully expected velocity out of the CZ to be higher, but the JP was also ~2x worse on spread and standard deviation as well. Tac 22 was by far the worst, some of the lowest velocities on those out of the JP were not even 900fps. The weak cycling from those very soft rounds also caused the next round to be a flyer (I can only assume because it changed the cycling speed). It got to the point where you could basically look at the chrono and call shots as good or flyers.


Lots of things jump out at me here, none of which are good for the JP and accuracy. First the average velocity across all four varied only 17fps for the CZ but almost 60fps for the JP. Both Standard Deviation velocity spread was basically 2x in the JP what the CZ was. Obviously this lot of Tac 22 is not good, and part of why I used it here was I know it's not consistent, but even so we can see the JP #'s are way worse than the CZ.

Question for the guys that have way more experience than I do in this.

I know of course that raw velocity #'s will be lower in a semi-auto of similar barrel length with the same ammo compared to a bolt gun cause of course you are losing some pressure to cycle the action.

However, do you also expect worse spread and standard deviation numbers or should they run pretty similar to the same ammo in a bolt gun?

Looking to sell my 16” (and some change) Sage M1A EBR. This sits in the safe and gets no love. Never got around to setting it up. Clearing some space in the safe. $3100 shipped, trade value of $3600 this comes with two mags and a soft case. Mainly would be interest in partial trades plus cash for the following: Volquartsen Mini Mamba, some higher end 3-18 scope (or equivalent, looking for my MK12), nice suppressors on form 4, Pure precision SKLTN Ti in long action, Henry SPD Hush 357/38. Any questions just ask. Thank you.

Looking for an LMT large frame MWS 12.5" with or without BCG. Also looking for a 13.5" 308 or 14.5" 6.5CM.

ATX Folding chassis direct from Europtic. Short forend to run 16" barrels. Includes night vision bridge and the top rail for the bridge (no side rails). Includes the MDT grip.

$1550 shipped

Would consider trades towards a LMT MWS 12.5" Upper, LMT AR10 BCG, 13.5" 308 barrel or 14.5" 6.5cm barrel.

New ready to go. Large primer pocket

$125 shipped
PP F&F

Kahles 1-6x24. Excellent condition, light wear on turret caps.
Clean glass, but one pin-head mark in eyepiece coating (bright spot at edge near 11 in pic)

$1275 shipped conUS, PPFF. Add 3% for G&S

Morning everyone,

Putting together a theoretical 7PRC all around LR hunting build with the following components and would like your feedback:

Kelbly Prometheus (Long Action)
26" Preferred Barrel Blanks Medium Palma with heavy fluting (approx. 3.9 lbs)
TT Rough Diamond Trigger
McMillan ELR Hunter (Adjustable)
Hawkins Hunter Bottom Metal DBM
Hawkins Hunter Flush Long Magazines
Not sure on muzzle device - either MPA 30 cal brake or suppressor depending on what is available.
Precision Rings - Hawkins or A419
Scope - New 4x24 Razor or the Delta 3.5-21 or the T6XI 3-18

Use case would be for all North American game up to elk in AZ, CO, & WY.

Let me know what you would change or swap out.

Selling a 338 lapua magnum barrel conversion kit for desert tech SRS rifles. 26 inch factory desert tech barrel, bolt, muzzle brake, and 3 magazines included. Barrel only has 50rds through it and loves the 250gr BTHP Norma golden target factory ammo, 3 & 5 shot groups below @100yds. $1100 shipped for the whole package

Like New FX Dreamline (25 Cal) plus accessories.

Includes the following

Air Venturie 4500 psi bottle $570
FX Dreamline 25 Cal $1,030
Barrel band 40$
Donny FL Moderator $100
FX Adjustible-can’t rings 85$
Athlon Talos Scope 400$
Roughly 2200 freedom seeds $200
Retail Total $2425

Asking 1600 shipped CONUS.

I will accept Venmo or PayPal friends and family

Some states require shipment to an FFL. Most states would allow me to ship it straight to your door.

This thing shoots amazing! You won’t find a more fun rifle or an inexpensive way to shoot after the initial purchase.

$2000 shipped to your FFL

Beretta 92X Performance, used it for USPSA shooting for a few months.

Included:
-6x mecgar 18rd mags with springer basepads and MBX followers, makes them hold 24 rounds. Still have the original mag springs/follower/basepad.
-Holosun 507 comp
-2x beretta 15rd mags
-Lok grip set
-Go Gun gas pedal
-wolf recoil spring pack (10lb installed)
-extra power extractor spring
-Wilson short reach trigger
-couple different mainsprings
-Double Alpha Racer X holster insert
-All original factory parts like the case and optic plates from Toni systems.

Trades:
New 6.5CM MRAD barrel and bolt
Mk12 barrel
RCBS Rock Chucker IV
AutoTrickler + A&D FX-120i
Nightforce 4-20 T3 reticle
Nightforce 4-16 MIL-XT
A419 loading block
RCBS match master funnel
Giraud power case trimmer

Selling my ruger 44 carbine, it’s a bicentennial model mfg 1976 in great condition shoots great, includes a vortex 2-7
Asking $1250 shipped obo

Pray it's HF, instead of just 2 & 70Cm meter trash.

Used 6.5 DN5 Muzzlebrake with 3/4x24 threads.

85$ shipped CONUS

Awesome brake that keeps the muzzle down as good or better than the current 500-700$ muzzle brakes! Ask me how I know!

Two used MDT 12Rd BR mags. One has Central Utah Precision Rifle lasered on the side in small letters (that’s my company).

Both mags work great.

Asking 100$ shipped CONUS (that’s 100 total for both mags).

I will take Venmo or PayPal friends & family.

For sale: Athlon Midas G2 UHD Pro 12x50 Binos. These have a great reticle. Used twice in NRL matches. Comes with every thing as new in box. Lifetime warranty. I had to go to 15x due to my old eyes and shooting PRS. $375obo shipped.

Looking to sell or trade a couple rifles I have.
Only trade would be both for a Barrett MRAD MLOK package.

1) Seekins HIT
26" Osprey .223 Wylde barrel, M24 profile 1-7tw 50 rounds fired
20" Seekins .308 M24 profile barrel less then 200 rounds fired
3x AW magazines
2x 5.56 magazines
ZCO not included

$3100 plus shipping for all


2) FDE LMT 308 Rifle. Shoots well but selling because it's a redundant firearm and I need the space. Previous owner painted it. Accessories SF 3 prong on light profile .308 16", LM8 upper, lmt BCG, radian charging handle, FCD trigger guard, G$ ssae-x, Reptilia Recce, DAC grip, 2 pmags. $2800 obo

1 box of Hornady 30 Cal 178 ELD-M x 100
1 box of Sierra 175 Matchmaking 175 HPBT

Asking $100 for both shipped OBO

Lightly used Botnia Maxi 6.5 muzzle brake (5/8x24).

Asking $525 shipped CONUS.

New these are $770

Watch reviews on YouTube. These are the best brakes on the market. 70% recoil reduction on mid-size calibers and 80+ % recoil reduction on Magnums. It really is insane what these brakes do.

For sale is an excellent condition TS Customs 7 PRC. 18 rounds down the barrel. Rifle hasn't been broken in yet and still shoots factory ELDM and ELDX at 1/2" at 100 yards.

Impact NBK Action
Benchmark Carbon fiber barrel
1:8 twist
5/8-24 threads
20" length
Hawkins DBM
AG carbon fiber KS1 stock
Has a TBAC SR brake installed and will come with the titanium brake as well

SCOPE AND RINGS NOT INCLUDED. If buyer wants turn key package then I can work out a package deal

Asking $5000 shipped OBO from me to your FFL. If your FFL does not accept from individual add $50