Pistol build ive been working on for a little while is finally finished up and im just in the throws of debating red dot (well green is preferable) over an lvpo

Looked at mro and aems

But I currently run a psa special price strike eagle 1-8 on my rifle and just having a hard time not just going that route again on the Pistol other than weight

Now not like its a work rifle or anything other than range and shtf stuff but hard time making the choice

So let's hear some thoughts

Stock is rem 700 SA, I've had a defiance ,impact, mack bros all in it and they worked fine. Has area 419 weighted arca rail. Stock is heavy fill and has xtra spacers for lop. Asking $1200 shipped pp ff, venmo, zelle.

Looking for an HMR stock. Scammers don’t bother

I have two brand new k328i scopes for sale. One is a (10706) with the SKMR4 reticle and the other is a (10707) with the SKMR+ reticles.

These are outstanding scopes with an enormous field of view that you have to see to appreciate.

$3300 shipped for each (PayPal preferred)

I have an Area419 36mm mount that can be included separately for $350 for the mount with their bubble level included. 0 MOA cant and 1.34" height.

If you want the mount plus scope, I can go $3600

Also I have an MPA 36mm that I can sell for $250. It is 0 MOA cant and 1.25" height.

Please ask if you have any questions and I'll be happy to help.

Text for fastest response at 636-297-5055

Thanks!
Ben

Anyone have any leads on new old stock or lightly used available for sale?

Hello,

I shoot recreationally in Phoenix, AZ, mostly at Ben Avery and Cowtown, from 100 to 1000 yards. I do not compete at this time.

I would like to know if you see any fatal flaws or bad logic in my proposed order of operations for 6.5 Creed bolt gun ammo.

My priorities:

*Complete the work fast

*Minimize single step procedures (i.e. weighing and dropping individual charges, applying wax to cases individually, annealing cases individually, etc).

*Obtain better performance than Hornady match ammo

*Process 200-300 cases at a time

Order of Operations:

Step 1 - Collect Fired Brass

Step 2 - Anneal Necks in Giraud Annealer

Step 3 - Spray lube with one shot or similar

Step 4 - De-prime on Dillon 550 Toolhead 1, Station 1 - Lee universal decapping die

Step 5 - FL Resize body on Dillon 550 Toolhead 1, Station 2 - Forster FL Resize die with decapping stem removed

Step 6 - Expand Necks on Dillon 550 Toolhead 1, Station 3 - Pin Gauge Die TBD

Step 7 - Tumble to remove lube

Step 8 - Trim / Chamfer / Deburr on Giraud Trimmer

Step 9 - Prime case on Dillon 550 Toolhead 2, Station 1

Step 10 - Drop powder (Staball 6.5) on Dillon 550 Toolhead 2, Station 2

Step 11 - Seat bullet on Dillon 550 Toolhead 3, Station 3


Thanks for any feedback you can provide!

If you had to choose and why and reasons, Leupold mk4hd vs Mk 5 HD vs NF nX8. This will be a high end varmint (coyote and bobcat)/long range target 6mm build. Thanks!

What red dot would you put on it? I am actually thinking about a primary arms 1x prism.

I like circle dots or larger reticles.

Waiting for the flat top picatinny to arrive so I can drop the stupid carry handle fiber optic, and get it looking more like a traditional KSG.

Never fired a 410 before, thing just looked like fun.

Bought and decided it wasn’t for me item is As described. $1200

Glock 19x with 3 17rd magazines. Brand new condition unfired. Also comes with factory Glock case and paperwork.

*Light is sold. I’ll update pictures when i get home*

$515 shipped to your FFL

PayPal FF, Apple Pay, Venmo or Zelle

I know this has been beat up, but I wanted to get some up to date opinions. I've been a Schmidt guy for years, and have 9 with the PMII being my favorite. With all the hype on the new ZCO, is there any real world data on reliability vs. the PMII and Kahles?

Excellent condition
800$ shipped and insured
750$ only price drop

Read that actor Gene Hackman yes Popeye Doyle from the French Connection films was found dead with his wife and one of their dogs in their home in New Mexico. Investigation ongoing. He and Robert Duvall are two of my favorites.

Going to be a lot of REEEE!! from this.

We are living in a time where 22lr is at its best ever! We have smiths who are bringing so much innovation for reliability and accuracy. We are seeing repeaters showing accuracy almost as good as benchrest builds. We have many actions that these builders have to do there magic with. And the barrel manufacturers are making the best barrels ever. Lets give a big shout out to your smith, what action was used and what barrel. All these companies have earned a great deal of respect!

Selling 930 Hornady Aeromatch 6mm 105 bullets. All the same lot.

Asking $320 shipped

Selling my mantis blackbeard trainer. It is the one that has a red dot laser, and as you can see in the pictures, the AR 15 handle has been cut off. I have a standard AR and an Sig MCX rifle. In order to get it to work in both rifles I needed to cut off the handles that take up the charging handle area due to the MCX design.

It works the same, but the only difference is you walk it backwards with your fingers instead of pulling on the charging handle in order to remove it from the chamber. I don’t use it like I thought I would so no need in keeping it around.

Asking for $130 shipped CONUS

Gen III CF forend 12.5” length in FDE (kryloned over FDE finish) with the short Recce rail (unpainted) and tool.

$350 shipped, Zelle/venmo

Trades, 20rnd metal mags, IR helmet light/mount (ops core), 1.7 34mm mount, Crye 34x

In good shape
Mpa clamp locks tight , never had it come loose,
Legs and locks work as they should, tight

Sold shipped conus

Complete Hodge Mod 2 Ultimate Ga Precision 6mm ARC Rifle


If you want a top tier precision AR that super accurate with impossible to find parts then look no further.

Bartlein BB Steel 18inch Rifle length Gas Plus +1 Barrel. This is the most expensive barrel I have ever commissioned. The BB Steel will last longer, combined with GA Precision known quality machining, i don't think a better 6 arc barrel has been made. Matched Alexander Bolt and I have extra bolt.

5/8 Thread _ Area 419 Hellfire Match Brake

Hodge MOD 2 Ambi Receiver Set
Hodge Ti Gray Pinch Lock Rail
Full Length Arca Rail
Vltor a5 buffer
Wisconsin Trigger
Forward Control Parts All around
Badger Safety
Badger titanium mag and bolt catch
Badger Charging Handle
Magpul Gray gen 3 Prs stock
JP Full mass BCG
Maid grip


I didn't spare any expense, test fired only

I will include dura and giessele mags to buyer

$2550 shipped

I have 3,000 rounds of 6mm ARC 108 Ammo Available

I specifically bought in large batches so i have the same lot numbers. All are in 200 round boxes.

I would like to sell in a large quantities and keep lots, together.

1,000 Rounds Same Lot $1300 shipped

1,000 Rounds Same Lot $1300 shipped

400 rounds same lot $500 shipped

400 rounds same lot $500 shipped

200 rounds same lot $275 shipped


open to offers

I have been using this insert for shooting matches and has worked out so well that I am selling these ammo trays to this forum. These are 3D printed and fit snugly in a Pelican 1040 case and even flipped upside down the rounds remain captured and intact. Loading either single shot or into magazines with the raised cartridges it makes it easy to handle even with that waxy lubricant. Available for Lapua/SK and Eley inserts right now and come in Gray, Orange or Color change filaments all shown below. Asking $40.00 shipped for the 200 round trays and $25 shipped for the 50 round trays with payment via PayPal, Venmo or US Money Order.