Noveske N6 gen 3 20in 6.5CM
-Matched FDE Noveske receiver set
-Surefire SFMB
-JP silent capture spring
-geissele SSA-EX
-Magpul PRS gen 3

~400 rounds on barrel

$3700 shipped OBO
*only looking for cash atm*
*case not included*

I have a JALJAE- 700-CB-S J Allen Chassis REM 700 - SA Coyote Brown right-handed for sale - $900 OBO

This was purchased a few years ago and has been sitting in storage. I wasn't opened until today to take pictures. There is some light surface rust on some of the screws from sitting in storage, as seen in the photos, but it should be easy to remove.

Feel free to message me with any questions you may have. Shipping is UPS insured and should be about $30 to $50. If it's over $50, I'll cover the extra. PayPal FF, Venmo, CashApp, or Zelle. I can meet in the Fort Benning, GA, area.

View attachment 8627916View attachment 8627916

I have for sale every part to build a Secret Service “JAR” clone.

Remington 700 long action

Remington M24 trigger

Remington BDL bottom metal w/box, spring and follower.

Badger Ordnance Steel 20 moa scope base

Hart SS 7mm 1-9 twist MTU contour barrel

McMillan A5 stock as ordered by the secret Service.

Leupold 3.5-14 MK4 with Badger rings and SIMRAD cap

All pins, springs, and screws.


The action has yet to be blueprinted and obviously the barrel is new.

I am switching gears and getting out of the clone game. This is my last one. It’s taken me several years to acquire all the right parts. The early SS JAR rifles were but in 7mm REM Mag in case you are wondering why the 7mm barrel.

I am asking $2450.00 shipped for the kit.

Venmo or USPS money order only.

Pm me with any questions

Thanks

Well after over a year wait I received a couple.

In stock, only a few in hand.

NSN Marked! Brand new in the box and hard to find at times Mb762ssal/re muzzlebrake . For the United states Marine Corp M40 A5 and M40 A6 clone sniper rifle.

$388 shipped

Please click here to view and purchase.

**

**

Sold pending funds.

Brand new M24A2 with 5/8-24 threaded barrel with cap. Barrel is profiled for the OPS Inc / Allen Engineering M24 suppressor . Badger Ordnance M24A2 DBM with one magazine. 20 Moa MARS rail. M24 trigger. Dry lubed bolt and receiver bolt raceway.



Please click here to view and purchase.

**

**

MDT peanut never used. Heavy fill.
Sold

Foundation Centurion
Black
RH
Impact inlet
Hawkins m5 cut but not included
6” brass arca
12 lead weights included
Tallon grip tape on grip
$1200 obo

New Matchmaster and new Area 419 cup. Matchmaster is several years old but never been plugged in and never used. Decided to go a different direction.
Would like to keep it all together. Asking 600.00


Looks like the cup will work but I haven’t actually tried it. You have to use the original platten.

Masterpiece Arms Rem 700 chassis for Short action, Right hand actions. Fde color. Never used. Barreled action was briefly mounted in it but never used or fired with it. Comes with factory box, action screws and wedge lock system. No scratches or scruffs anywhere.

$775 shipped

PayPal FF, Apple Pay, Venmo or Zelle

Everything bought new. Burris 2-7x scout extended eye relief optic with BDC reticle and MKM throw lever, Arken 1” low rings, Precision Reflex steel extended eye relief picatinny mount for Remington 700 action. Blue tape capturing screws. Excellent condition, No isues, just returning to a traditional mount / optic.

Scope $225 shipped. Rings $30 shipped. Rail $50 shipped. Can accept PayPal, Venmo, Zelle, or Apple Pay.

Love this scope they are literally my favorite. It’s been wasted on my hunting rifle so I swapped it out and could use the money elsewhere.

$650 firm shipped. PayPal F/F, CashApp, Venmo.
Trades:
Terminus Zeus QC prefit barrel
McMillan A5 adjustable SA
LRI R700

BNIB WILSON COMBAT DIVISION 77 PROJECT 1, comes with everything NEW, NEVER FIRED OR TAKEN OUT OF SAFE. SERIAL 101, It is the very first one built after the first special AMMO CAN presentation 100 were allotted. This is a one of a kind, I just have a HAYES Custom and ordered this on a whim after I ordered the HAYES, thought I would want to keep both, but after thinking on it for a while, I have decided I don't need both and want to stick with the HAYES, so this gets a lucky winner. Comes with the WC range bag and all the extras for mounting the RED DOT of your choice as well as 3 18rd mags.

Asking $4500 Shipped to your FFL, PayPal F/F preferred, but will entertain other payment methods like ZELLE or VENMO.
First to say they will take it with a follow up PM wins, SERIOUS inquires only, and NO TRADES. Thanks for looking.

LNIB 2020+ COLT PYTHON 5" Barrel, comes with everything NEW on top of a new set of CO076HO8 Nill Grips - Colt Python / Anaconda, which are shown installed. ($235 value), also comes with original grips.

Shot once at range with less than 50 rounds through it. It also has Wilson combat Sights installed which are a vast improvement over OEM.
After I went and shot it with the Anaconda (also for sale on here), It has just become a safe queen.

REDUCED Asking $1400 $1350, $1275, Shipped to your FFL, PayPal F/F preferred, but will entertain other payment methods like ZELLE or VENMO.
First to say they will take it with a follow up PM wins, serious inquires only and NO TRADES. Thanks for looking.

(REDUCED) LNIB 2021+ COLT ANACONDA 4" Barrel, comes with everything NEW on top of a new set of CO076HO8 Nill Grips - Colt Python / Anaconda, which are shown installed. ($235 value), also comes with original grips.

Shot once at range with less than 50 rounds through it. It has Wilson combat Sights installed, vast improvement over OEM.
After I shot it once it has just sat and became a safe queen.

Asking $1400 $1350, $1200, Shipped to your FFL, PayPal F/F preferred, but will entertain other payment methods like ZELLE or VENMO.

First to say they will take it with a follow-up PM wins, serious inquires only and NO TRADES. Thanks for looking.

New barrel that I bought a few years ago and never used for the Accuracy International AI AX/AX308.

6XC from TS Customs - $295 OBO

I have a few more that I'll be listing—mostly 6.5 and 6 Creedmoor, but some new 308s. I'll also be listing some lower round count used barrels.

Feel free to message me with any questions you may have. Shipping is UPS insured. PayPal FF, Venmo, CashApp, or Zelle. I can meet in the Fort Benning, GA, area.

we will be staying in eugene OR for a few days then driving up the coast and staying in portland for 2 days. one of those days we will be going to mt st helens.

we have a list of hotels and i would like to know where to avoid.

if anyone has any points of interest, that would be appreciated as well.

edit to ad:
the hotels look to be near the intl airport, a few hotels are across the river in WA.

thank you.

Two new barrels that I bought a few years ago and never used for the Accuracy International AI AX/AX308.

6 Creedmoor from OTM Tactical - $350 Each OBO

I have a few more that I'll be listing—mostly 6.5 and 6 Creedmoor, but some new 308s. I'll also be listing some lower round count used barrels.

Feel free to message me with any questions you may have. Shipping is UPS insured. PayPal FF, Venmo, CashApp, or Zelle. I can meet in the Fort Benning, GA, area.

New barrel that I bought a few years ago and never used for the Accuracy International AI AX/AX308.

6.5 Creedmoor from Mile High Shooting - $400 OBO

I have a few more that I'll be listing—mostly 6.5 and 6 Creedmoor, but some new 308s. I'll also be listing some lower round count used barrels.

Feel free to message me with any questions you may have. Shipping is UPS insured. PayPal FF, Venmo, CashApp, or Zelle. I can meet in the Fort Benning, GA, area.

For sale is an excellent condition Ruger LCR in 38 special. Comes with carrying case and manual.

roughly 20 rounds through it.

Asking $490 $325 OBO shipped from me (individual) to your FFL. If your FFL requires from FFL add $25 on to the price

I can't remember how many times I've seen myself or others post a question to a forum (here and elsewhere) and the responses generally tend to be some form of "you didn't satisfy my completely subjective and arbitrary requirements for figuring this out on your own so instead of being helpful I'm going to be a condescending dickface to a stranger on the internet to help ease my own insecurities and try to look cool", that then get blindly upvoted by fellow insecure asshats.

Does this happen in every hobby? Are people really that arrogant and dependent on others' approval or is shooting really just 85% assholes with a few decent folks sprinkled in? I hope this isn't just another once enjoyable thing that has been ruined by the anonymity of the internet and hairy knuckled cavemen typing away in their mom's basement.

/rant

I have 3 bricks and 2,50 CT boxes all same lot. $550 shipped.

5/8x24
30 cal
Has only had 3 rounds through it. Just prefer my suppressors.
Price is 165 shipped, buyer covers PayPal fees

From my CDX30 260 REM

Factory Bartlein straight flute barrel (factory black finish)

8 twist

Gunsmith removed this barrel with 300 rounds on it mid 2024. Just broken in shoots bug holes with hand loads of 130 Berger Hybrids + H4350

Decided to switch calibers

$300 shipped