Area 419 Improved Powder Funnel with the following Funnel Heads

• 22 cal
• 6mm
• 6.5mm
• 7mm
• Dillon Powder Die Head
• 3 inch stackable drop tube

Used in excellent condition

$85 Shipped and Insured

Tried to remove one of the spacers in the butt pad - screws wouldn’t bottom out subsequently.

Are there shorter screws available for this?

I've got three 6.5 Creedmoor barrels. Two 24" and one 18.75"

24" number one is a factory-delivered (probably Bartlein) with 520 rounds and a Q Cherry Bomb installed on it.

24" number two is a brand-new Proof Research Steel pre-fit barrel. Part# 110188

The 18.75" is a Hawk Hill with close to 400 rounds on it. This barrel is a hammer. It's similar to a 3B profile with a little bit more meat on it.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

Bartlein - $600
Proof - $700
Hawk Hill - $600

Bartlein


Proof



Hawk Hill

Like new Vortex Viper Gen 1 MOA milling reticle scope with rings.

$SOLD Shipped

PayPal Accepted

Found it floating in my shop, Send IT Level, Comes with the Ocular light system that has not been installed, The little ocular piece, double sided tape, and fiber optic rod.

Asking $200 Shipped OBO

Magneto speed chronograph, used once nothing wrong with it, upgraded to a garmin no longer needed. 120 obo shipped.

Selling a Leupold Mark 6 3-18x44 with a TMR reticle. These Mark 6's are exceptionally lightweight and have excellent image quality. The scope is in very good condition and will come with the factory box as shown.

SOLD

No trades please.

Advice requested on last minute reconsiderations regarding the chassis selection for an MPA PMR rifle on order: Matrix Pro II vs the Vanquish.

I chose the latest iteration of the Matrix, the Pro II, but now I am thinking of changing the work order I sent to MPA to specify the Vanquish instead. Would like to know thoughts from those who have used either, and especially those who have used both.

At this point 3 considerations steer me toward the Vanquish:

1) The Vanq has a more manageable forend than the mile wide Matrix Pro II.

2) Out of the box, the Vanq has more mass in the forend. That may possibly save me from having to add additional weights out front, keeping the overall rifle weight down.

3) I like running an over the bore bipod when shooting non PRS from a bench or ELR prone, which necessitates pic rail attachment on the segments that fit onto the top of the forend of the chassis, over the barrel. That is not an
option for the segments that fit the Matrix Pro II, as far as I can tell, while it is for the Vanquish.

Thoughts, anyone? Any advice much appreciated. I will be using the rifle for some PRS along with general ELR fun time shooting. Maybe kill a deer or hog or coyote too.

Its a little tight, I can get card stock between the barrel and the top of the bridge but I dont know if its enough. I'm thinking of getting some gasket material from Napa in the morning to make shims. Eventually the rifle will be rebarreled when I kill the current barrel. Gasket material shims be good enough to get me some clearance and keep the bridge steady enough when I use a friends gear?

Virginia Giuffre, Jeffrey Epstein and Prince Andrew accuser, dead at 41 by suicide: report

https://www.foxnews.com/us/virginia-giuffre-jeffrey-epstein-prince-andrew-accuser-dead-41

Heard a lot good words about the L3I elite magazines, bought 3 and tried the 1st one out, initially it won’t feed, bolt won’t catch ammo, noticed I could adjust depth, after adjustment, it started feeding, then started FTF, got the magazine out, found out that the spring stuck in the middle, follower is free floating as spring is stuck.

Like new Glock 19 gen4 Summer Special. This was a limited run between g4 and g5. Has front serrations and night sites. Also includes case and 3 mags. $500 plus shipping or local pickup in Montana

Like new Glock 17 gen4 Summer Special. This was a limited run between g4 and g5. Has front serrations and night sites. Also includes case and 3 mags. $500 plus shipping or local pickup in Montana

A buddy and have talked about buying a mower for our church .........a small church, maybe 15 acres ..........we have been using members mowers, but it would be nice to have one on site, and not have to depend on someone showing up with a mower.......They do have a tax exempt number we can use...........any suggestions on getting a "DEAL" would be appreciated.......looking for something like a 60" ZTR................Thank you........

Looking for a 30mm badger ordnance rangefinder mount P/N 306-165 - Let me know what you got

I’m building a second precision rimfire. I don’t shoot prs but I’m looking to a build it similar as a trainer and long range setup. Prone/tripod/barricade etc

Looking at chassis options. I run a B14R already. But want a second one setup similar for shooting with the family and buddies

Current setup is a B14R 18” steel/DNT/MPA BA Comp/TT primary two stage

Thinking of setting the second one up with a B14R 20”/DNT and trying to decide on the chassis. I’ll probably run a trigger tech two stage in this one as well

Looking mainly at the MDT elite or MPA Matrix currently. The con is the balance. I think the MPA matrix will be super rear heavy.

Share your thoughts and pics if you have them.

Two things I’m concerned of most is

1) Reliable feeding. My comp doesn’t have an adjustable mag catch and one mag of three for sure has issues. The others feed fine

2) Balance- not super ass end heavy without the need for a stupid amount of weights

Current B14R prior to the DNT upgrade

Price: $675 $650 $625 $600
Shipping: CONUS
Payment: USPS Money Order is preferred, but I'll do PayPal F&F.
For your safety do NOT reply to this post. Scammers use your "I'll take it." post to try and get you.

Setup includes.
MDT LSS Gen2
MDT SCS Lite Stock with four spacers. (I'll update when I find a fourth spacer. I have a ton of them.)
MDT 7" Arca Rail (Needed slight modification to fit. The screw is going through the factory sling stud hole. Rail needed a M-LOK stud removed.)
MKM Adaptive Precision Grip (Also comes with MDT Vertical Grip Premier.)

Everything is in great condition. Some slight wear around the QD sling mount on the buttstock. Then slight surface rust on some of the screws, but that is to be expected with what they use. I did source some stainless brass tipped set screws for the cheek rest.
Was a great little chassis for my 12.5" 6.5CM.

I have a like new LRA lever and a 419 mount.


Level sold. @Jcarpenter223

419 mount $25 shipped
Sold @Alec Cochran

New in sealed boxes
3 boxes of Lapua 300 PRC Brass
300 pieces total
Received for s project that did not happen
Sold

Like new.
$200 shipped

Price: $1000 $975 $925 $875
Shipping: CONUS
Payment: USPS Money Order is preferred, but I'll do PayPal F&F.
For your safety do NOT reply to this post. Scammers use your "I'll take it." post to try and get you.

Scope only, mount not included.
Glass is a little dusty but will clean it when I go to work before shipping it. I work for one of Trijicons competitors, better equipped to clean glass there than at home. All paperwork included, even the microfiber towel it comes with.

Brand new. Never used it and sold the rifle it was supposed to go on.
$550 shipped

Want to Sell 3 AICS Chassis for short action Remington 700/clone actions.
all are in new condition.

Non-folding AT 1.5 (2014 model, p/n 26694GR), green, - $850
Folding AICS 2.0 .308 Win. (p/n 3217) - green, price - $1000
Folding AX Pre-2014 .308 Win (p/n 20224FCBL) - black, - $1050

A 5-round factory magazine is included with each stock Price includes shipping.
Don't really need any trades at this time, sorry.
Payment via discreet Paypal F&F, Venmo, USPS MO (will ship when payment clears.)

For sale is a like new 6304RDS - 2832 ALS/SLS® MultiCam® Tropic Holster w/ QLS 19 Locking Fork

Right Hand
Multicam Tropic
Gen 5 G19/45/19x
Optic: Standard optic similar to Trijicon RMR/ Holosun 507
Light: SF X300U

Asking $165 shipped OBO

$90 shipped. Cerakoted OD Green by Long Rifles Inc.

8-40 screws not included.