Hawke Airmax 30 SF Compact 3-16x44 AMX IR Reticle MIL turrets(Model# 13210)

$SOLD Shipped

PayPal Accepted

I have an idea bouncing around in my head and wanted to get a few opinions.

My favorite rig is based on a 12.5" Criterion Hybrid barrel. Next to my "precision" rig, it's my most accurate setup. It almost seems like it goes on autopilot everytime I squeeze the trigger.

Anyway, I've never been wild about shooting suppressed, but last weekend, I got to shoot a rig with a Cobalt Kinetics suppressor on it and now, I can't get it out of my head.

What I want to do is get the direct thread model (it has an extra baffle in it), which is made of titanium and pin and weld it to my 12.5 to make 16".

Is this a mistake? When I shoot the barrel out, how ugly is it going to be removing the suppressor to put it on another barrel? I've pinned, welded and removed a lot of muzzle devices, but never a suppressor.

Hey all,

I have an Atlas V8 BT-10 NC Bipod for sale. It is in excellent shape with only minor scuffing on the bottom of the rubber feet and a few flecks of grey on some of the knurling.

$150 shipped

Vortex Viper PST gen2 5-25x50 FFP
Illuminated EBR-7C reticle MIL
Vortex Pro rings
$660 shipped to the lower 48.

Can send more pics if needed. Scope is in good shape.

I do not have the box or any other accessories

Remington 700 LA 30-06 Lightweight Hunting Rifle Project w/ NX8 2.5-20X50

I say lightweight, but I'm not counting oz's. Just in general terms of my objective.

Have a set of NF Ultralight 4 screw .885" rings I was planning on using but open to suggestions.

Looking at:

Near Precision 40 MOA
Seekins 20 MOA
Farrell FG force 20 MOA

Looking at these three cause of the integral recoil lug.

Probably don't need a 20+ MOA rail for the application, but figure I'd just get it. Never know what this rifle might become down the road.

In the same vein probably worth it to re drill and tap for the #8 screws?

Vortex Venom 3-15x44 with the EBR-7C MRAD reticle. Mounted in 34 mm Leupold QRW-2 medium rings.

Never dropped or banged around. No scratches on glass. 60 rounds of 6.5 CM w/ brake underneath it. Sold the gun it was meant for, no longer needing something of this spec.

$300 (Venmo preferred), buyer pays shipping from Chattanooga, TN. I'm not willing to separate optic and rings. I have sold three firearms and multiple parts on SH and have never had an unhappy recipient.

Happy to answer any questions. Thanks!

Mounted and shot at the range one time. Purchased from CS about six months ago. One of the first 8-40 2x 10mil turrets, non locking elevation. Flip up lenses and mk machine level. ZCO has upped their prices. I have had it wrapped since I got it.

Asking 4400 shipped.

Hate to sell but need money for a new truck. Will trade straight up for a 2024 King Ranch F450

Hey guys gonna sell my TT525P. Gen3xr reticle. Good condition with the scope chap. $3,500 shipped. Have the box and all the accessories that came with it.

From left to right, all are 5/8x24 threads and are .30 Cal all prices include shipping.

Area 419 Hellfire SOLD
Precision Armament HyperTap $125
APA Fat Bastard Gen2 SOLD
ParTech Hammerhead $125 (requires crush washer or shims for timing)

Thanks for looking. I know it's a Longshot. I have a 26" PRC barrel on an origin action that Spartan Marc made me before he moved. it's a legit 1/2MOA shooter with factory eldx and has killed a number of nice pigs.

I also have a 22" proof solus prefit that i'm not shooting.

I'd like to trade either for a carbon 6.5prc at 20 or 22". Only interested in shouldered barrells.

Pics below of the assembled spartan as well as the dismounted creed barrel.

Looking for a foundation revelation (light) for a lone peak short action. Color does not matter.

LS Wild is building our inventory beyond our own products. I am working with Marshall at Preferred Barrel Blanks for a group buy.

They are setting up to drill 6mm next week so I am going to open up a group buy tomorrow and add barrels you all want. The lead time will be cut down.

Comment with the specs for shouldered chambered prefits. I will add any prefit to the store if I can sell at least three of the same barrel.

List action, chamber, contour, threading, flutes, etc. that you want.

I will set up a Sniper’s Hide group buy page, but here is the page I set up for Rockslide.

Long shot hawk spotting scope camera. Used it twice and works great I just upgraded to the 1000yd cameras
$225 shipped

Full Power Wilcox Raid Xe with ERGOCTO 3-button switch - Red Laser

$3800 shipped CONUS UPS insured

Manners TCS in very good condition, I tried to take a picture of every defect I could but there’s not many. Just a few normal small blemishes. Has DBM Mini Chassis, Sikes clutch kit, PRS TCS Max rail with 2 weights and a few flush cups. Rem 700 SA. I had an Impact NBK in it.

$1350 shipped. Not looking for any trades.

Very Lightly Used Sig Sauer Cross Rifle in 6.5 Creedmoor 18 Inch Threaded Barrl in the First Lite Cipher Camo Finish .....Comes in the Factory Box with Lock but seem to have misplace the Paperwork/Owners Man. ..... 1 - 5rd Pmag Folding Stock ...Gun Has Less than 100rds Fired and is a solid .75 MOA Gun with The Standard load of 4350 and 140 eld.........SPF Shipped My FFL to Yours ........

All Items are up for grabs. First person to claim item on the post takes it. All items are shipped lower 48

Leupold Field Clamp - $40 SOLD
(3) Plastic AICS Mags (1 MDT 10 Rnd & 2 Magpul 10 Rnd) - $75SOLD
(3) MDT Metal 12 Round BR/Dasher Mags - $150 SOLD
34MM Vortex Cantilever Mount 1.4355" Tall - $75.00
New Out of the Box 36MM Area 419 Rings 32mm Tall (1.25") - $200.00
Used 36MM Hawkins Rings w. Diving Board 1.15" Tall - $150.00
Sphur 6601 - $200.00 SOLD

Looking for feedback, etc. reference a new rifle case for the ATX with folder. Getting a longer barrel/different caliber spun up which means it won't fit into what I currently have. 26" with 419 HFM, be right at 41 +/- 1/2"
I do know the AIM has two versions, I would use the "right side" folding version of course. The Triad while not intended for a folder appears it can accommodate one, especially the right side folder. Plus the Triad is US made.

Anyhow--Anyone have the Triad version and can comment? Or have other ideas-no hard cases. Just a simple case that I will have and last.

Who would win?

Anyone know of good holster maker in the Richmond Va area. I know the guys at TTI/Rapture Tactical will do it but lookingto see if there is other options. If there is a online site you have used let me know. This is my setup for a holter.....HK VP9L align tactical thumb rest, tlr-1h and holoson optic.

ATS Tuner 5/8-24.

$135 shipped

PayPal F&F

Mpa DN5 6.5 5/8 -24

$125 shipped
PayPal F&F

New in box, red anodized 36mm, 1.27" height, 0 MOA cant. $250 shipped.

Also consider trades for berger 6mm 105 or 109 hybrids or 108 elite hunter bullets or one piece area 419 35mm mount

Proof research carbon fiber AR10 6.5CM barrel for sale. Never fired, but was assembled into a build at one time. Comes with Proof Research Rifle length +2 gas tube. Looking to get $500 obo shipped. Thanks.