Selling a short action, unaware of work done to it, stripped 308 face bolt with firing pin. Have a magnum bolt as well complete. 6.5 prc carbon barrel, has 1000 rds 6.5cm then punched to prc for 500rds, not adding value. I never got it screwed on as a file needs taken to the first thread, all my tools are in totes. Spf shipped, or I'll keep the magnum bolt and do sof for the rest of it.

Since I have gotten into hog hunting more seriously, I find myself in some serious briar thickets sometimes. It was recommended that I try briar-proof clothing. I started with some thin briar-proof chaps. I found them lacking in protection around the hips. Also in warmer weather my legs would be soaked when I pull them off because the material doesn’t breathe well and they slide over my hunting pants. Then they aren’t the greater protection from old, dry briar vines. Some of them stick my right through the chaps.

Next I decided to order some briar proof pants made of heavy duty cordura and a coat made of the same material. I haven’t worn the pants yet for the breathabilty factor. But I’ve used the coat in a number of nights recently. What I’ve noticed about the coat is that it is great protection for briars as tall as me or growing up to chest level. However, moving around in the coat is noisy as hell. Pulling a hand scanner out of my pocket, easing my arm to view through it, removing and replacing my rifle sling from my shoulder, etc all make noise. Just walking with my arm rubbing against the coat makes noise and sometimes turning my head. I’m not sure what the animals hear, but it can make it difficult for me to hear what going on around me a night unless I sit still. I have been able to sneak up in hugs a few times at night; the closest being 8 yards. I’m wondering if this fabric will become quieter with use as I break in the coat. I’m hoping it will become quiet like my filed jacket has become. I don’t wear it hunting because of all of the metal zippers.

Has anyone else encountered noisy hunting gear or clothes? Were you able to break them in with time to where they were quieter when you moved around in them afield?

Hey guys,

Selling my Terminus Zeus with Proof Research carbon 6.5 Creedmoor barreled action. Only has about 50 rounds through it.

The Zeus is the "Quick Change" model. If you're not familiar, check out Terminus's website.

The barrel is a carbon fiber Proof Research 6.5 Creedmoor, 1 in 8 twist Terminus pre-fit. I followed Proof's recommended barrel break-in procedure.

I'm only selling because I'm a fool and though I could build out a hybrid gun that could cross between a PRS-style rifle and a lightweight mountain rifle (spoiler alert - not possible), so I'm going to go a different route.

See photos - you can stack rounds on a dime at 100 yards.

The Terminus Zeus sells for $1625; the barrel sells for $1099 - plus all the taxes and shipping.

I'll let it go for $2250.

So we're both comfortable, we will definitely talk on the phone or video chat to hammer out the logistics before any money is transferred or the gun is shipped.

PM me with questions or to swap phone numbers.

Also, not interested in trades. Thanks guys.

2x spuhr 4006 excellent condition no box or wedge. Sold

1x holosun he510c-gr excellent condition 225 shipped no box

I have a .308 Winchester 16” barrel with a 1:10 twist. Bolt Action Mossburg Scout.
I would like to use the Hornady SubX projectiles in either 175 or 190 grains. Are those viable or should I go heavier in weight? Would like to use Tight Group and Federal Large Rifle caps. Do any of y’all have any thoughts? I can read the printed load data but just not sure on which bullet weight to start with in a 16” barrel. Load data was created with a 24” . Looking to load subsonic.

Aero precision solus short action .478 face, & 17' comp chassis in sniper gray, both BNIB. Bought when they first came out, never found the time or money to build it out. Neither have seen a tool or anything.

For clarification, this is in fact a .478 bolt face, but for whatever reason was listed as a .473 on Aeros website when I ordered it ages ago.

Action - $700
Chassis - SOLD

Everything works great. It loaded half moa 50BMG loads with 750gr Amaxs, Hornady factory brass, and H50BMG.


The LEE Press kit is $200 shipped

Wilson case trimmer is $150 and comes with a “fired” case holder, shipped.

I’ll sell both for $320 shipped. This is a great and affordable start to loading 50BMG!

PS, use Dillon case lube for these giants.

Excellent condition RCBS 6BR matchmaster die set. Full length sizer. Comes with RCBS .267 neck bushing. Micrometer seater die. No shell holder.

$ SPF shipped. PPFF, Venmo, USPS MO

Cross posted

Selling my X-ray. Excellent condition. Comes with arca rail and action screws.

$old shipped

Milo, my rat terrier has had health problems since we got him. Started with allergies to grass, weeds, and everything outdoors when he was a puppy. We did allergy testing and immunotherapy injections from the time he was a year old. Then he had seizures, thyroid issues, and pancreatitis which led to diabetes a couple months ago. I didn't know that led to cataracts which recently started to show.

Last night he couldn't find his way up the steps and I had carry him inside. This morning he was playing like everything was OK. I came home after work and let him out to figure out he is completely blind. I tried a short walk outside since the weather is nice, but he got scared and wanted to go back inside.

He just turned 7, but I think it's time to put him down. He's scared and confused. It's a matter of time before he has another pancreatitis flare up and is in pain again. I hate the thought of it but the quality of life is pretty much gone.

I have a new in the box trigger cam 2.1, bought in January of 2025 and under warranty. Box only opened to make sure product was complete. The unit was never taken out of the box until the pictures i took of it today. I bought this with the intent to use this for my precision 22lr shooting. I've sold that rifle and do not see the need for this any longer. I paid $630 last month (see receipt), I'm asking $500 shipped, price is pretty firm - thanks

The must have utility for Hunting & Sport Shooting Enthusiasts​

Have you ever imagined a world where you can relive certain experiences? Here it is! With the Triggercam 2.1 you can enjoy footage from your hunting experience. The Triggercam 2.1 is designed to withstand any recoil your hunting rifle might throw at it.

The TRIGGERCAM mobile application provides the user with fully integrated control interface to your TRIGGERCAM through Wi-Fi connectivity. The app is available on both IOS & Android platforms downloadable from the app stores free. The app provides users with the following interactive functions:

Livestream TRIGGERCAM to
your mobile device.

Control the recording of your TRIGGERCAM from your device.

Record, save and view videos
directly from your device.

Share your video/photo content on Social media platforms and with friends.

Well guess I have a new name E5C03

Old name Bamcis

Account details https://www.snipershide.com/shooting/account/

As the title states, I am looking for a new or used gen 1 TBAC Ultra5, CB Mount, in whatever color. Only looking for Gen1, no gen 2 please. Form 3 preferred.

PFA, must have verifiable feedback

Mint condition SO-362cx with adapter plates has the updated locks.
No Head just adapters $425 SOLD

When are Holman or Bondi actually going to have the cuffs slapped on one of these big talking Dems.? How about just one even for show.Phil Murphy or anyone in Massachusetts with their big yaps. Someone has to go. Make up some charge like the Dems do. If not then maybe those two are hot air themselves.

Does it exist?
Something similar to the vortex fury 5000 ab… I had a pair and wasn’t crazy about their app.

I’d like as few pieces of gear if possible. Having the ability to range and get my dope quickly is lore important than magnified optics… so if a kestrel and range finder is best bet, so be it.

Just seeing if there’s any competitors for the fury 5000

Looking for a used NX8…

Only interested in dealing with established members.

Trex Arms p320 x5 Ragnarok holster CB
$55 shipped

Tier 1 Concealed p320 Centurion Holster LvL2 MC
$85 shipped

Safariland 6354RDS MC
P320 full size with light
$180 shipped

I've got a NIB Triggertech AR-10 single stage diamond with the pro curved trigger.
Asking $255
PM if interested

6 Sig P320 21rnd Mags
$150 shipped for all 6 or $40/each

SLIDE
P320 FULL-SIZE 9MM 4.7" SLIDE ASSEMBLY, OPTIC READY, COYOTE BROWN
P320 FULL SIZE 9MM BARREL, LCI, 4.7"
RECOIL SPRING ASSEMBLY, P320, 9MM, FULL SIZE
Prefer to sell slide as a package,
$300 shipped

CH Precision P320 EPS Plate
Have an EPS id sell as well for $300 shipped


GRIP MODULE
P320 X-Full Size Grip Module, weights, Magwell and professional Carbide Texture
$150 shipped
NO FCU!

I've been reading the forum for a while and finally decided to join up. I look forward to the conversations and hope that I can be an asset in some way.

Looking to sell my Nightforce unmount. It has been sitting in the reloading drawer for the last year. It is the A257 model. It is for a 34 mm tube and is 1.44" height and has 20 MOA CANT built in. The mount has some wear on the bolts and has some scratches from sitting in my drawer. I am asking $175 shipped!hipped.

Looking to sell a Thunderbeast Arms 338BA brake. it fits Accuracy international barrel M18x1.5. I am asking $75.00 shipped.