Found one thanks to this thread!

Selling brand new never used ruger american hunter mag pul stock. Grey. $200 shipped

Selling my like new MPA Matrix Pro Rem SA in Black. Prestine condition except for a small blemish in the cerakote on NVG bridge. Includes all accessories and a Grey Ops Barricade Stop.

If interested please PM contact information and plan to discuss sale details via phone to avoid fraud concerns. Sale will not happen without direct communication between myself and purchaser. Asking $SPF

Got an arc nucleus in 6.5 creedmoor 16.5 inch barrel 5/8x24 threads or i can swap it out with a 7-08 barrel at 22 inches threaded 5/8x24
Both barrels have 300 rounds on them ill sell both of them with it or just 1 caliber
Xylo chassis with extension
Triggertech special trigger
Can throw in a fat bastard muzzle brake as well
Asking 2200 for the 6.5 creed
2400 for the 7-08 barrel
Or 2600 for both of course these are all best offers as well. Ill get pics uploaded later.

Also to add i will not ship this after the shit show I'm currently dealing with on trying to get a firearm shipped. ill drive this directly to your ffl within any state surrounding Oklahoma or in Oklahoma itself and if your willing to meet me halfway ill lower the price.

Willing to buy eberlestock tactical rifle scabbard. Let me know if you have one that you’d let go! Any color is fine.

Any info on terminal performance of 35 Whelen past 300 yards on elk? I'm looking to rebarrel a Ruger M77 chambered in .270
I know everyone is going to say that .270 and the 06 is plenty for elk, and it agree with that. I'm just looking for something unique and devastating.

I'm old and my geometry is long gone. Weird question I cannot answer.
For sake of argument lets assume a rifle will put every round though the same hole......
What amount of movement at the bench would cause 1/4" impact movement at 100 yards? 1/16", 1/8"??
I've long forgotten how to calculate this. Maybe some of you big brain, smarter guys can tell me. Thanks.

Unit is basically new, still has the screen protector on it. Comes with the weather vane and molle case. $275 TYD. I also have an AG kestrel case in ranger green I could throw in for an additional $old

NiP FCG
NiP muzzle adapter, M14x1 lh to 5/8-24
Lightly used scope mount



$70 obro shipped.

All the folks across the nation that have been arrested for DUI while 100% sober so the pigs could get free pizza are starting to sue the municipalities that unlawfully arrested and charged them with crimes they were 100% innocent of . And the tax payers will foot the bill . And suddenly for no reason at all folks fucking hated them

Charges include sexual assault , assault , DUI and false arrests

Login to view embedded media
And they kept an innocent man in cuffs in a cell for 14 fucking hours . Because he was standing on the side of the road .

Bearx could County TX

Is this how it was in the good ol 1950’s ?

He didn’t have any face tattoos and wasn’t part of a protected class so they went full retard on him . Good tho g he didn’t have a dog or a woman with him .

Lightly used Geissele Premium MIL-SPEC Buffer Tube - DDC

Asking $50 shipped

Vortex Venom 5-25 EBR7C reticle
Vortex throw lever
Butter Creek flip caps
Warne MSR mount in grey

400 tyd insured

Night, force, wedge prism. 29.1 MIL/100.1 MOA model. $800 shipped.

Chassis has been used and it shows but it still works and functions just like it should. Comes with internal weights. Asking $700 shipped pp ff,venmo,zelle.

Hey y'all!
We have Envision MARSc, MARS Lc, and MARS Mc instock and ready to ship.

Text, call, or email for inquiries or to purchase!
214-507-7208
[email protected]

These are awesome units. Insanely small, super light, tons of features, and very customizable.

Howdy everybody, I can’t seem to find a dedicated 416HF thread in the hide, so figured I would make one…

I’m considering building a 416HF for ELR on a Bat XL, for 515-550gr projectiles.

I know a lot of guys are currently using the 416HF on the ELR circuit. Is there anybody prepared to share information on the cartridge?

Best propellant?

Consensus on best projectile for the cartridge?

Ideal twist rate?

Things to stay away from?

Any good data or inside info?

And where the heck do I get me a MCS ELR stock

TIA

Kahles 3-12x50, illuminated MSR reticle, FFP, 34mm tube, left side windage. Excellent condition. Comes with OD Green MKM scope caps and original box. Can throw in some 1" NF rings, 4 or 6 screw. $old shipped, firm. PPFF or Zelle preferred.

Trades: Large 30 cal can. Infitac Fast Mini. Maztech X4-LRF 2k. Garmin Xero. 22 Creed ammo. 25 Creed AI barrel & ammo. Manners MCS-PPF. Inverted CF tripod.

Hey everyone,

I got a MARS, and the info sheet is pretty vague about zeroing/collimating the day optic and the WMLRF.

It says to use 100m, which I’m assuming 100y would be better if that’s what I’m shooting in. But beyond that it’s not really specific enough for my simple mind.

In using an Impact 4k previously it had the user measure HOB from the diving board and optical center line then essentially offsetting them (I think it was a 0.6 mil offset or something similar).

The MARS literature says nothing about that what so ever just. Just align the reticle with the vis laser at 100m, and aligning it with the range of engagement is even better. Kinda hilarious considering the device is for finding said range of engagement, but I digress.

Anyone have any advice or tips for how to maximize this things ability? It’s going on a field match rifle so the whole idea is less gear to mess with and accurate range and firing solutions as fast as possible.

Thank y’all.

Selling my unused Origin action. 308 bolt face. PENDING will mark sold when payment is received.

So I had a bunch of 9mm loaded not too long ago. Just range ammo using some 115gr XTP that I got free from Hornaday on their free bullet promo.
Loaded up a bunch and never did anything any different than I ever have.
Had bought a new carry gun in 9mm so wanted to get to the range and shoot it.
Get there and the first mag I made about 7 rounds and the gun locks up, and I mean locks up solid.
Finally got it free and notice the round in the chamber the bullet had pushed back in the case...Kind of weird, never had it happen before.
So loaded up and shot again. Made it about 5 or so rounds and it did the same thing.
Got my other 9mm out and it happened again.
So stopped shooting and went home.
Got to looking and there were a bunch of rounds in the 100 count box that would just push back in the case.
So checked all I had done and out of about 500 rounds, about half would push back.
So checked my dies and reset them and loaded a few dummy rounds and did a push test and again the bullet would push back into the case.
Had the taper set just like the instructions said. Nothing worked right.
Probably reset the dies 5-6 different times, took them apart and cleaned them. Nothing worked.
I cant figure it out at all. I don't know if its a die issue or what.
I had some loaded from a few years ago still that were done with a RCBS die and they are all fine.

The only difference in the two is the ones I had issues with were the Hornady bullet and loaded with Hornady dies. And the others were just round nose bullets loaded with RCBS dies.


Contacted Hornady and they said I could send the dies, bullets, brass in and they would check them. But I don't understand what might be the issue.

Not new to reloading pistols as I load for 45acp, 40S&W and 357 also and have zero problems with them.

Anyone by chance have any ideas?

Looking to see if anyone can tell me what the load data for Lapua 6BR ammo with the 105 bullet is. What powder and amount along with primer. The rest like oal I have.
The ammo shoots so well I am trying to duplicate it.

Bartlein barrel chambered by 5x5 precision in 6BR, 7.5 twist, muzzle threaded 5/8x24, 1.25 straight. Zero rounds. $600
The pics are of it's twin the barrel for sell is brand new. Sold

Sig Sauer TANGO MSR 1-6X24 – 30mm – SFP - Illuminated BDC 6 - Black reduced to only $259.99, While Supply Lasts

High Performance 6x optical system with low dispersion glass
Integrated thread in throw leaver for quick magnification changes
Illuminated MSR BDC-6 reticle with 11x brightness levels
Lay flat flip-back lens covers included
Dependable waterproof, shockproof, and fog-proof performance
Includes ALPHA-MSR 1 piece aluminum cantilever mount

Sig Sauer’s Tango MSR Riflescope is a perfect addition to an AR-type platform, but works equally well on virtually any other modern sporting rifle. It utilizes a high performance 6x optical systems with low dispersion glass for a crystal clear sight picture and excellent light transmission. The Tango MSR also comes equipped with an illuminated MSR-BDC6 SFP reticle, which is composed of a precise, 1-MOA free floating center-dot in the middle of an illuminated 10.85 MOA semicircle. Directly below the center-dot and semicircle is a “Christmas Tree” of holdover points and hash marks, allowing you to effectively compensate for bullet drop and wind drift at extended ranges. Other features of the Tango MSR include an integrated throw lever to seamlessly transition between magnifications, and an Alpha-MSR cantilevered scope mount is included as well.

Scope Weight: 1.24 lbs (without mount), 1.60 lbs (with mount)
Scope Length: 11.25 inches
Magnification Range: 1x - 6x
Scope Objective Diameter: 24mm
Scope Tube Size / Mount: 30mm
Turret Adjustment (Click Value): 0.5 MOA
Elevation Turret : Capped 0.5 MOA per click
Windage Turret: Capped 0.5 MOA per click
Scope Turret Rotation: Counter Clockwise (CCW)
Reticle Position: Second focal plane
Reticle Details: MSR-BDC6 reticle
Eye Relief: 3.3 inches
Illuminated Reticle: Yes - 11 levels

Includes
Battery
Allen wrench
Manual
Lens cloth
Alpha-MSR cantilevered scope mount

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com