Veteran ammo 300BLK 220gr subsonic (175 rounds)
Remington UMC 300BLK 220gr (20 rounds)
Winchester 9mm Luger 115gr (100 rounds)
Federal 9mm Luger 115gr (50 rounds)
Speer Gold dot 9mm Luger 147gr (100 rounds)

$215 shipped

I am new to LR and have been having a heck of a time getting a good zero on my ruger precision 65prc with an Arken EP5 gen1 mrad mounted with vortex rings w/ 0moa at 100yd. I was finally able to get it looking good today but in order to do so I had to dial down as far as the Arken would allow. When i run the numbers on it, in order to account for that 30moa i need to dial down 8.7 milrad (87 clicks), but this just didn't do the trick. Ultimately I had to dial down somewhere in the 15 milrad range to get it looking good and I am wondering if that is indicative of something being off or mounted incorrectly, or maybe there is something putting cant on that I am not figuring in. I know the rail has 30moa, according to the vortex specs the rings have zero moa. Does anyone else have a similar setup? Is taking 100% decline reasonable?

This is what I was using for math

• 1 MOA = 1.047 inches at 100 yards.
• 30 MOA = 30×1.04730 \times 1.04730×1.047 ≈ 31.41 inches of shift at 100 yards.
• 1 MIL = 3.6 inches at 100 yards
• So, 31.41 inches ÷ 3.6 inches per MIL ≈ 8.72 MILs.

CMMG drop in 22LR conversion kit for AR15s.

Brand new in the package. I bought this forever ago and never used it. Has 3 mags.

150 shipped.

Venmo gift or zelle. No PayPal.

No trades.

Zero rounds new in the box knights armament sr25 lower receiver

$sold to your ffl

So a Marine buddy and I are looking to build .338ARC pistols, maybe I’ll SBR mine but we’re looking for handguards that will accommodate a silencer under them. We’re going with a 8.5” barrel and looking to use 13.5” handguards but everything I see is all oh look how slim this is! I don’t want slim! I want meaty! I want thick! And I want a large I.D.

If you know of anything like this please drop some suggestions. Dare I say it there’s to many options and not enough gun parts search engines!

Just got a bunch of MDT stuff in,
in stock and ready to ship

Most orders ship within 1 business day

Selling a JAE 700 short action. It’s an earlier version, it may be a Gen 1. It’s Stamped JAE700-A. I’m sure someone on the Hide can confirm what generation it is.

I had it cerakoted by Custom Gun Coatings in 2022 and the finish looks pretty close to flawless.

It’s an older JAE but everything on it is in good condition and works as it should.

Hit me up if you have any questions or would like additional photos. Asking $1000.

Thanks.

Selling a like new Eotech EXPS 3-0 with UID label. Bought brand new in late '24. Comes as shown in factory box.

Price: $625 shipped

No trades please.

Mini pro with double arca adaptor $200 TYD

As the posting states. I am looking for a complete set of these with all the associated hardware for an ACC Elite Chassis. Prefer them to be in good condition. I will only but from an established Hide member with a history of multiple buy/sell transactions and a 100% positive feedback rating. The seller will be willing to provide a current timestamped proof of life for the gear. Buying price based on condition and your offer.

The hardware:

• Four #10-24 x ½” Flat Head Cap Screws per weight for fastening to the chassis

PIC FOR REFERENCE ONLY -

Vortex Strike eagle 3-18x44 FFP Mil/Mil



Mil adjust , EBR-7C reticle



Prices includes shipping.

If paying by check, it must clear before shipping. I have PayPal and Venmo ,you cover fee if you choose secure PayPal.



$525 each SOLD

I am using a Hornady product for the first time with my 37XC...

IRD/Trijicon REAP IR, Long battery case for rechargeable 17500s. Used of course but not abused. Typical scuffs and scars from night hunting but in perfect working order. A nice all USA unit. I have gone to shooting more with a thermal clip on and didn't shoot this at all last year. I can probably put my hands on the original CR123 battery cap. Much more useful with run time using the long cap.
$2500 shipped.

Athlon Helos BTR Gen 2
2-12x42
MIL reticle - AHMR2

Like new in box -- with all papers

This was lightly mounted on a rifle, but the rifle was never fired. The scope is essentially brand new.

PRICE: SOLD

Free shipping to the 48 states

I prefer PayPal Friends and Family ... The one without any fees

*** I am unable to upload photos since they are "too big" ... I can provide photos to those interested

Nightforce SOCOM Clone Kits – Brand New, Never Opened

Selling two limited-edition Nightforce SOCOM Clone Kits, still sealed in their original Pelican cases.

1-8x24 ATACR S-VPS SOCOM Clone Kit​

• Kit #290 of 300
• MSRP: $4,535
• Price: $3,500
• Link for details: https://www.nightforceoptics.com/riflescopes/limited-run/1-8x24mm-f1-s-vps-kit

7-35x56 ATACR P-VPS SOCOM Clone Kit​

• Kit #280 of 300
• MSRP: $5,890
• Price: $4,800
• Link for details: https://www.nightforceoptics.com/riflescopes/limited-run/7-35x56mm-f1-p-vps-kit

If someone wants both, I’ll knock the price down to $7,750 for the set.

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned. Go read the site rules before posting again.

Bought this about a year ago . Mounted it on a pistol. Sat in the gun safe. Sold the pistol . So this is up for sale as well.
Sealing plate included, battery still sealed in factory box
$370 shipped
Thanks for looking
Cross Listed

Or just a coincidence ?

Divorce Sale
I got the go ahead from my lawyer that I can offload some of my firearm's stuff prior to finalizing my divorce. Here is a list of all that I have for sale. If I can bring myself to list more, I will either update this post or make a new one. For some of the lower cost items, willing to ship but prefer to deal locally (Kansas City) because shipping can be a pain. If my prices are out of line, shoot me an offer. Prices include shipping. I am not looking to trade. These items are listed on 2 other forums. USPS mo or cash is preferred method of payment but will take other payments if more convenient.


All rails are new, not blems. $250 shipped for each rail NIB
Mk16 13.5” sold


View attachment 709576
new geissele 13.9” CHF barrel 5.56mm $250 shipped NIB
Lrue tactical LT209 hanguard 12" $275 sold


View attachment 709577

MDT ESS chassis system, $900 SOLD

Patriot Valley Arms ARC nucleus prefit barrels specs based off build sheet when I ordered. brand new unmounted prefit barrels
6mm Creedmoor, Osprey barrel works brand, Action: American rifle company Nucleus or Archimedes 22" (i thnk) 58/24 threading, marksman contour $620 shipped
6mmBR, Action: Action: American rifle company Nucleus or Archimedes, 24" (i think) 1:7 twist,, 5/8-24 threading, medium Palma contour $620 shipped


View attachment 709579 View attachment 709580
American Rifle Company Xylo Chassis. REM 700, Short action, right hand. NIB $900 SPF

Primary weapons system M116 MOD1 upper keymod rail 16" barrel. USED $700 shipped

A quick review of a Glock 47 with some modifications. It started out as a stock 47 MOS. To the pistol I added the Radian Ramjet (barrel and compensator). I chose the Trijicon SRO as the optic. I replaced the plastic sites with whatever was on sale on Amazon at the time and I added a Tacticaltrigger pack (new shoe, shorter pull and reset, minus connector). I decided to clean the pistol this weekend because I just hit the 50k round mark and thought I would give a review.

I keep a Rite in the Rain notebook in my range bag. I use little picket fences on the first page to keep track of round fired. I also write down failures and sometimes color metaphors when I have a bad day at the range. In 50k rounds, this pistol had 12 failures and 8 of them are because I did not read and follow directions. (The Radian documentation recommends 124 grain or higher ammunition to ensure function). When the pistol was new, I had some failures to eject with 115 grain range ammo. I had a few light primer strikes at the beginning of February, and I replaced the firing pin spring ($4), and solved the problem.

In terms of performance, I can easily do sub 2 second bill drills with all a zone hits with the Glock. From the holster I can do the same drill, but mag dump 20 round in 4.1 to 4.2 seconds. If I bring something like a Shadow 2 or a 2011, I may pick up a 1/10 of a second or two in both drills.

I used to compete all the time, now not so much. I shot a carry optic qualifier last year with my Glock 34 and hit Master (this pistol has talon grips and the same TacticalTrigger). I took the Glock 47 to another qualifier and shot open with it because I thought it was funny, I placed 4th out of a field of 31 and again hit Master.

The pistol does not show any unusual wear. I shoot whatever crap 124 grain ammo happens to be cheapest on ammoseek or sgammo. I was surprised at the amount of filth that came off the pistol but 50k rounds without a cleaning will do that. Glocks are fantastically reliable firearms; I highly recommend them.

Mostly all new parts! 308 AR Build separated!!!

I assembled it and decided to go a different route. My loss is your gain! Part out or buy it complete.

-New Aero Precision Upper with dust cover and Forward assist (Sniper Grey Cerakote)-$140

-New Aero Precision 15” Atlas R-One M-LOK
Hand guard (Sniper Grey Cerakote)-$175

-New SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block .750” and used gas tube-$150

-AIM Surplus Nickel Boron BCG-$150

-Seekins Charging Handle-$60

New Aero Precision Lower(Sniper Grey Cerakote)
Includes
-New Magpul Grip (Grey)
-New OEM trigger
-New Battle Arms Development Enhanced Bolt Catch Investment Cast (BAD-EBC)(Sniper Grey)
-New Tactical Galaxy mag extender release button (Sniper Grey)
-New Tactical Galaxy Ambi selector switch (sniper Grey)-$275

-JP Silent buffer spring-$100

-New Magpul Gen 3 Stock (Grey)-$200

-New Magpul CTR Mil Spec Stock (Gray) with buffer Tube-$60

Save money and buy it complete for $1200 or prices are separated to buy what you want.

Long shot anyone wants to give one up. Don’t care about cosmetics, as long as it functions properly.

Bushnell XRS II 4.5-30 G3 Scope for sale. In excellent condition. Original owner. Level not included.

$680 shipped. Accept PP F&F, Venmo, PP G&S (add 3%)

I’m looking to pick up a fun range pistol in 9mm. My plan is to spend around $2,000 on it. I’m ok buying used. Do I look at the CZ Shadow, Staccato P, or something different?

Selling a Manners LRH long action stock - looking to get $$$$ shipped. Stock has been used but is in fantastic shape. Bottom Metal shown is not included, but I have that listed separately if interested. Color pattern is scorched earth. Happy to answer any questions or hop on a video chat if that helps provide some reassurance. Thanks for looking!

So here in central Kansas... if you were going to give America an Enema... this is probably where you'd put the hose. I keep expecting John Lithgow to knock on my hotel room door and tell me he is trying to ensure I am not dancing.

Some will get that.

There's bible thumpers falling out of the streetlights...

Trying to order a pizza to my hotel room. Should be easy, right? First call to Pizza Hut about 1/8 mile away. "We don't deliver. It's the other store." Call other store. Get a massive chain menu... followed by a fucking Beaner who can't speak any fucking English. All she does is try and sell me pizza specials. Won't shut up. Hang up on the fucking bitch.

Call Domino's. After a phone tree... get another fucking beaner. Tell her it's for deliver to the ***** Inn by the Interstate. "I need an address." "I'm in a fucking hotel by the Interstate. What is this... a call center?" "Jess... ees call center." "Fucking Jumping Jesus on a pogo stick... I have to look this up."

So now I am trying to find the address of some fucking hotel in Bug-tussle Kansas. Find it. Give her address.

Here's what I want.... "Do you want a special? Because I have specials?' Fucking no. I just want a medium meat lovers. "Do you want a dessert, because we have pizza crust smothered in sugar syrup shit." No, I want a pizza. "It will be delivered between this and that time..." DON'T Fucking care. it gets here when it gets here.

Ho-kay... you have to use keypad to enter credit card. "I want to pay the driver." "No... you can't do that... have to enter the credit card." %$$#@@ing hell. Enters credit card with keypad.

"You sure you don't want dessert which is pizza crust smothered in Pillsbury Doubhboy sugar syrup?" No. I just want a pizza. A fucking medium meat lovers pizza.

Deport them all. No wonder these pizza places are going out of business at an epic rate. They deserve to.

Call centers to order pizza? Staffed by fucking 'wets? I don't want to listen to Spanish to order a fucking pizza. If it was Italian... OK... I'll play along. But this isn't a Tamale cart.

Damn, deport them all. And lock up the Pizza Hut and Domino's executives for employing illegals at an epic rate.

Better not be a fucking beaner dropping off my pizza.

Sirhr