380 100gr RNFP $30 qty 500 open box
9mm 124gr RN $40 qty 500 sealed box
45 230gr RN $65 qty 500 sealed box
45 230gr RN $65 qty 500 sealed box
45 230gr RN $53 qty 365 open box
45 230gr HP $72 qty 500 open box
$250 if you take them all.

These are all new, no pulls or weird stuff. Just stuff I dont use anymore and tired of storing them. Anything in an open box was counted by hand to verify qty. Pick up in San Diego.

Looking for something like the short action precision holster or whatever else for belt mount. Let me know what you got collecting dust

Thanks

In like new condition MPED.
Purchased while my other optic was in for QC issues. 3 total range trips shot from a bench on a 24lb 22lr in 419 mount.
Has scope tape and gaffers tape. Buyers choice if you’d like it just how it is. It would ship in bigger box bubble wrapped with OEM box beside.
Located in SoCal.
$500 TYD.
PP F&F - Zelle

For Sale: Leupold VX-6HD CDS-ZL2 Rifle Scope: 3-18x44 FireDot duplex, Gen 1. Side focus illuminated with leveling.

This is a slightly used scope. I bought it new. It is an awesome scope. You won’t be disappointed with the glass. I’m selling it because I’m moving towards a competition based scope.

It comes with Leupold Alumina flip up rear and objective scope caps, box and Warne Maxima Horizontal 30mm Medium fixed steel scope rings, black -514 medium.


I’m asking $1,100+shipping/Insurance
Pal Pal F&F

Selling a Sako TRG 30mm dovetail mount. The mount is in excellent condition and can comfortably accommodate 56mm objective bell scopes. Comes as shown.

SOLD

No trades please.

RCBS Pro2000 progressive press in good condition. Comes with the following.

3-tool heads
Multiple APS primer strips for large and small primers.
APS strip loader.
A bunch of misc spare parts.

SOLD—$500 shipped
Pay FF or buyer pays fees.

Take off from a Seekins SP10 in the ugly OD Green battleworn Cerakote. Comes with rifle length buffer tube. No buffer or spring. Should work on an AR-15 or AR10 with the appropriate spring and buffer.

50 shipped.

Venmo gift or zelle. No PayPal.

No trades.

GG&G Offset Picatinny Mounts

45 Degree (Red Dot Mount) $30 shipped

90 Degree (Lite Mount) $35 shipped

Ballistic Advantage 223 Wylde Mk12 Ops profile for the AEM5 brake and collar. 18 inches. Paint and marks from use.

Ran this barrel for about 100 rounds on a Mk12 Mod1. Went with a different setup when I decided cloning wasnt really my thing. It shot OK with factory ammo. About 1.5 MOA. I'm sure it would do better with hand loads or if you only shot 3 shot groups.


Only 75 shipped

Venmo gift or Zelle only. No PayPal.

No trades.

Loading up first test loads with the 110smk in 6 creed. What kind of jump do you guys suggest starting at? 15 thousandths?

Rifle: Savage MK II
Ammunition: CCi Standard Velocity
Range: 56 yards
Temp: 63*F
Altitude:780’
Group Size 1.35”
Mean Radius: 0.40”

Scope: $54 CV Life 6-24x
Rings: Came with scope
Bipod: CV Life chineseium

Duno if I want to pick up a CZ 457 or just put real glass on this. For the little amount of money I have invested in this thing I’m pretty happy with it $225 rifle. $50 something dollar scope and rings, and the bipod was given to me…. Silencer is a form 1.

I kind of want to put the same scope as on my CZ 600 on it (Vortex Viper 5-25x56 ENR-7c) and get some Lapua Center-X.

Edgewood “Tall Boy” with Slick ears 3/8
Sold shipped

Edgewood “Shorty” with Slick ears 3/8
Sold shipped

Warhorse Clede Grey sold shipped

Armageddon Gear Python Multicam sold shipped

Armageddon Gear Schmedium Grey Sold shipped

Accuracy 1st bag Tan (2) sold shipped

Mitutoyo 547-561s

Neck OD and wall thickness guage

Measures to 1/2 of thousandth ( 0.0005)

New condition with case

Sold shipped

Looking for tan color dump pouch Blue Force or Blue Alpha preferred with clips thanks

Just got back from the range and disappointed once again in Hornady 6.5 prc 147 loads. Last two rounds in the box both blew the primer. I didn’t see it after the first one otherwise I would have stopped. Hopefully nothing hurt the action.

Anyways, looking for some suggestions for other factory 6.5 prc you have had good luck with. Also, I remember reading somewhere hornady had put out some questionable 6.5 prc ammo recently. Is this still the sentiment?

Who wants to do a pool?

Hopefully the woke pope is burning in hell before the end of the week!!

Cheers,

Sirhr

Remington XCR II in 338 Ultra Mag

Rifle has been shot less than 75 times. I’m the second owner the previous owner was on TBH which is where I bought it. After I got the rifle it was threaded, bedded and trued this was done by a gunsmith in Hempstead TX. I have all reloading equipment for it. It shot under MOA with factory ammo but with 250 bergers it will stack them on top of each other with single digit SD and ES. I’ve shot several 3” groups at 800 yds. It was super easy to load for. Not pushing it at 2780 with Berger 250 OTM. I bought a suppressor in 30 cal and don’t plan on getting any bigger so this one needs a new home. It also comes with hs stock (installed) and the original Remington stock and talley 30mm rings and bases. 1300 OBO. 2000 with all ammo and components listed.

The following ammo and reloading is available for the 338 RUM not selling before the rifle sells.Easily over $1000.
2-boxes(full) of Remington 250gr psp
1-box (full) Remington 250 Swift A-frame
2-boxes (full) Nosler custom 225 Accubond
15-cartridges Barnes 225 TTSX
2- boxes of Berger 250 OTM
1.5 -boxes (75)of Berger 300 Hybrid
1-box ADG brass with 25 loaded that shoots really well. I have the load that was made. Also some loaded that shot ok I didn’t pull and could use as foulers
RCSB dies

Superlative arms bleed off

$old

Seekins select adjustable gas block

$75 shipped

I see the T1X rifle advertised in the walnut stock as a " Hunter " model. Anybody got one or laid eyes on one ?
I am really curious as to what the wood looks like.

I had to do it, everyone seems to have the best rifle in the price range by purchasing the Bergara B14 R .22. I have one, it is serial number 2000 from 2019. I could never get it to function, until I staked the ejector like everyone told me to do. I just couldn't seem to get the punch and do it. I finally did that, but the magazine isvery wobbly side to side. I ordered and received another Bergara a couple of days ago with the date of 2024. The magazine fits nicely in it. When I change and try the new mag in the 2019 rifle , it is wobbly. . Does anyone know what was changed ? Is it the mag well that is smaller ? How do I get the mag to fit as it should in the older Bergara......Yeah, I know, I gotta be spoon fed here, but old brains are a little foggy sometimes. The stippling on the new stock is not as slick as the old rifle, the molded in HMR in front of the trigger is gone in the new rifle. The barrel is rounded off where the fat part tapers down on the new rifle, the old one has a discernable line there. Best rail for the money ? I don't remember what I put on the older Bergara. I think I want plus 20 MOA. As always, I truly appreciate all the help this old **** can get !

Sold..

Vortex Gen2 EBRC-2 mil reticle in excellent condition. Comes with Vortex caps, bubble level, throw lever, and rings. The ocular cap does have a tear in it.


PayPal FF or buyer pays fees.

More pictures on request.

Be interesting to see if they suddenly decide they aren't fucked up any more... or if they are just so damaged and mentally-ill that there is no hope for them.

But it's some scary statistics...

Sirhr

Foundation MG2 stock with Hawkins bottom metal and arca rail. Inlet for TL3 action. Has the hillbilly cut for thumb rest done by Foundation. Used in excellent condition.

SOLD—$850 shipped
PayPal FF or Venmo

More pictures on request.

Foundation MG1 with Hawkins bottom metal and arca rail. Has inlet for TL3 action. The stock has the hillbilly cut for thumb rest done by Foundation. Used in excellent condition.

SOLD—$750 shipped.
PayPal FF or Venmo

More pictures on request.

Heat should not be an issue with rimfire like it is with centerfire.

I am trying to build a lighter weight precision rimfire for an 8 year old, and I am curious about whether a carbon fiber barrel is the way to go.