Looking to sell. Zelle preffered but can take usps mo or PayPal ff. If paying with mo, expect delays.

Schmidt and Bender 3-20x50mm PMII. This one is CCW. Locking mtc turrets. Has some scuffs on the turrets and some small marks on the body but glass is clean and functions well. I do not have the rear scope cap but have one of the one hundred concept deals I’ll toss it. Scope comes with an ard.

The mount is not included but I will let it go with at buyers request. It is a 1.5” ARC M brace with 20 moa built in.

$2445 shipped without the mount. If you want the mount add another $270


Would consider trades plus cash for an NX8 2.5-20, XTR Pro, or a Cronus G2 at this time. I haven’t been able to shoot as much as I’d like for awhile and would like to let the S&B go to a good new home.

If anyone has one they are wanting to let go of please DM me. I

Used Agm Tiapan 15-256 Thermal Monocular. Works fantastic, glass is great, no scratches and fully operational. I am only selling this unit because I upgraded to another Agm unit with better resolution. This works great as a entry thermo monocular unit.

Clean MPA one piece mount with diving board. 1.5”/ 34mm rings. Mount has a coat of CLP on it for storage.

225 shipped TYD

These bullets have been out a while. Hopefully some guys here can share the loads the have worked well.

Bolt/Gas
Cartridge
Powder
Charge
Velocity
ES/SD

All of the usual guidelines apply. Every gun is different. Start low, and work up. Et cetera.

Thanks in advance.

Brand new in box, factory sealed. Right handed trigger tech diamond single stage trigger, flat shoe.

Working on initial load development for a new rifle. Barrel has a little over 200 rounds down the tube. My current thinking is to run seating depth tests with 41.0 gn and 41.8 gn loads. In a previous test I tested 40.9 and 41.0 loads and the ES/SD results were almost identical to the 41.1 gn load shown here with slightly lower velocities. I didn't have a lot of time yesterday, so I wasn't able to let the barrel cool down as much as I would have liked which likely effected the group sizes in the later groups as the barrel and the can were getting pretty warm. All groups are 5 shots at 100 yards with virtually no wind measured with Ballistic X. All test loads were seated .005 off the lands with Berger LRHT 140s. I'm curious which loads others would choose and why if they are different from the ones I'm planning to use. The extra shots between targets 8 and 9 are sighters. Thanks in advance for your thoughts!

Factory sealed, Brand new in box left handed R700 short action MDT ACC ELITE chassis, black. 1250 shipped TYD, or best offer.
Street price is 1600 on euro optic and optics planet.

Bought this for a project. Never got off the ground.
BARSTO X-Carry / Compact barrel
1/10 twist 9mm
BRAND NEW
save $90 and a 3 to 5 month wait
$170 shipped
Thanks for looking
Cross Listed

Finally got everything in house and now to send it to get built….custom Borden action with a timed TT, Schneider 30” blank, and a JAE chassis soon to be Ceracoated.….going the Tubbs 6XC route.

Fired once, cleaned, oiled and stored in a temperature and humidity-controlled environment. Like-new condition comes exactly as delivered from Bond Arms in hard plastic case. Very cool little derringer style, pocket-pistol gun. If you've never handled one of these they're built like tanks and will fire either .45 Colt or 410 Gauge shotshells. Handy gun for hikes in the woods, backpacking, etc.

I'll cover shipping and insurance in CONUS from my FFL to your FFL. $400 takes it. PPFF or Zelle.



Bond Arms Snake Slayer Features

This is the original Snake Slayer which is the ultimate concealable .410 shotshell/.45Colt pistol for people that need a larger grip. The extended grip provides extra comfort without detracting from concealability. The Snake Slayer has the 3.5" dual caliber .410/45LC barrel chambered for the 3" shot shell, comes with a removable trigger guard and will accept any of the barrels offered.

Bond Arms Snake Slayer Specifications

• Brand: Bond Arms
• Model: Snakeslayer
• Category: Break-Action Handguns
• Series: Original
• Caliber: 45 Colt (LC)
• Gauge: 410 Gauge
• Capacity: 2rd
• Action: SAO
• OAL: 5.50"
• Sights: Blade Front, Fixed Rear
• Grips: Rosewood
• Safety: Crossbolt
• Barrel Length: 3.50"
• Weight: 22 oz
• Metal Finish: Stainless

I have a few extra tenion protectors for M30 (AXMC/AXSR) & M27 (ATX/ATXC/AT/AX) I made available. They are quick thread as the threads are in the last 1/2" of the cap so they go on/off quickly and not turning forever.

$15/ea shipped

Description

This pistol has less than 100 rounds fired, it was then cleaned, oiled and has been stored in a temperature and humidity-controlled environment. Includes hard plastic case and all accessories exactly as delivered from FNH. Why settle for cheap imitations when you can get the real deal in 5.7x28MM pistols. This package includes 2-20 round magazines! I'll cover shipping and insurance in CONUS!

$850 shipped/Insured from my FFL to your FFL. PPFF or Zelle.

Features

The FN Five-seveN® pistol was developed in the early 1990s and features a cold hammer-forged barrel that is chrome lined for extended service life. The polymer-framed FN Five-seveN® offers single-action operation, low felt recoil, 20-round magazine capacity and is equipped with an ambidextrous, forward-mounted manual safety and an accessory rail that accepts tactical lights and lasers.



Product Details

Details

Caliber: 5.7x28mm

Operation: Single-action

Magazine: 20-Round (includes two 20 round magazines)

Weight: 23 oz. (empty)

Barrel Length: 4.8"

Overall Length: 8.2"

Sights: Adjustable 3-dot

Very little use on this, 12-15 rounds maximum, then cleaned, oiled and stored in a temperature and humidity-controlled environment. Everyone needs at least 1 wheel-gun! 4" barrel, 6-shot, .357 Magnum! Easy cartridge to reload as well!

$700 $650 Out the door! Comes complete with hard case and everything exactly as delivered from S&W. I'll cover shipping and insurance in CONUS and it will ship from my FFL to your FFL so no worries. PPFF or Zelle. No trades!

Amazing they found a NEW WhuFlu virus “in the wild”?in chinna- and of course it has the potential to be way way more badder than the first token- crank up the money printing machines- break out the voter drop boxes already filled - and tell everyone they love to find more government corruption and waste but they’ve gotta shut everything down and send all the “nonessential “ peons home - for years ! Perfect !

Hi guys,
I've got an old paddle board Ruger M77 Markii in 30-06 and would like to modernise the chassis.
Just after any ideas from those who have done it or are in the know?
I've looked at Boyds, H&S precision and Bell amd Carlson. Does anybody have any experience with these stocks or any pictures to help envision what the finally product may look like?
Any assistance, ideas, recommendations are appreciated.

the more I appreciate Alan Parsons.

Login to view embedded media

I recently built an 18” 6.5 Grendel with a NightForce NX8 2.5-20x

I went with the superlative arms piston system, but the BCG is tight in the upper so I may swap it over to DI with a superlative arms adjustable gas black and JP FMOS.
After researching the round more it really seems to be great at everything. So I’m thinking it may be cool to build a 13.9” SBR upper to have superior capabilities compared to my 300blk out and 14.5” AR and far less blast and recoil than my 13” SCAR 17. If I do that it makes total sense to swap the superlative piston to the SBR and I would use a VLTOR MUR upper since the BCG fits perfectly in that upper (my 14.5” AR setup). What I’m really wanting input on is… optic arrangement. While I’d have the 18” upper for long range, the 13.9” should be very capable out to distance. So I was thinking of trying the Steiner T6XI 2.5-15x with an RMR mounted on top. I’ve never used a top mounted or offset RMR, but I’m sure I can train to become accustomed to it. I thought this set up would make more sense than another LPVO. I’ve got a Trijicon Credo 1-6x on my 14.5” AR and a Trijicon Credo HX 1-8x on my SBR SCAR 17. Thoughts?
Use would be run and gun and up to whatever distance the rifle is capable. I’m thinking of trying the Lehigh 110 grain copper solids and the 110 grain controlled chaos.

Copper MDT ACC gen 1
$700 shipped OBO, need gone asap

Comes with adjustment wheels for buttstock and cheek riser and some homemade weights.

Just picked it up today, it won’t make weight on my NRL rig like I thought. My loss is your gain.

Looking for a good reliable scale to weight bullets, check pistol charges, etc. I have a good (A&D FX) digital scale and a really cheap digital scale, looking for something in between for under $100. Looking at the Hornady G3 1500. There are a lot of options, any recommendations?

Question for those that have used both the older non r-lock Anvil 30 and the new r-lock version...

I have an older non r-lock version right now. The clamp tension on the rail isn't adjustable, but it can compensate for different rails somewhat as there is a wave spring under the nut. The wave spring compresses and can handle a bit of dimensional variability in the rails and still provide adequate clamp force. It works on all the rails I currently have with no issues.

I keep thinking about picking up one of the newer r-lock versions to either replace mine or for a second tripod setup. The new R-lock Anvil 30 has adjustable tension where you can squeeze the clamp in and then adjust the nut for different rail dimensions. My question is does the new version with adjustable clamp tension still have a wave spring under it so it will accept some rail dimension variability without constantly messing with the adjuster nut, or do you have to manually adjust the clamp nut for proper tension on every rail you put it on? I'm hoping it still has a wave spring in it so I don't have to constantly mess with it.

Offloading a bunch of bullets as I never ended up building a 300 WSM and shoot bigger stuff in my 300 NM. All prices are per box and include shipping. I'd greatly prefer to ship a guy multiple boxes, particularly of the 100 ct boxes. We can probably work something out if you want all 500 of a certain type, etc.

If you're so inclined to building a new 30 cal, I do have a 30 cal proof carbon 22" 1:9 blank listed for sale as well as 200 pieces of 300 WSM (Norma) brass.

Watch out for this guy1sickpuppy [email protected]. He just messaged me when I commented on a post for someone else and trying to get me to pay him with Paypal F&F.

Gotta fly for a hunt, would like to see if someone has 2-3 empty 6.5prc factory ammo boxes to put my reloads in. I’ll cover shipping and what not…

Thank you gents