This is the new 2.1+ model that fits ZCO oculars. It is brand new, factory sealed. I have two one of these for sale.

The 2.1+ will fit the large objective ZCO, but comes with 8 sleeves that you can stack to fit just about any scope.

$540 shipped. Sold pending funds

Looking for cole tac shooting bags and other gear
area 419 hellfire adapters, no brakes just the adapters

PM if ya are parting with anything.

As the title states, selling a Schmidt & Bender throw lever for PMII scopes.

Please DM with questions or to buy.

SOLD

Selling my Spuhr QDP-4616 34mm 1.5” height 20moa. Great shape, no range time.

SOLD

Hey all I’ve been shooting a Ruger 10/22 LVT for the last few years and shot very well with it winning/ placing in small local shoots but I’m debating upgrading and figure I should move to bolt gun instead of pouring money into the ruger. The few guys I know running kidds can’t run suppressors because of fouling and gumming up so that’s a deal breaker for me. Right now I’m considering the b14r barreled actions steel or ss heavy, T1x (my prs centerfire is a t3x ctr in a whiskey 3), or a cz457 mtr or varmint.

Reviews look like accuracy out of the new b14r heavy are picky and so so and rebarreling is expensive and a pain but uses 700 accessories so opens a lot of options

T1x is a semi light profile for the job and acceptable accuracy but same ecosystem as my centerfire. If the ace was closer to 1200 I’d probably just do that.

Cz457 is the mtr worth it over the varmint? Threaded mtr are like hens teeth so either have it threaded or buy a different barrel.

If my centerfire was a 700 platform the b14r would make a ton of sense but since im running a tikka that makes the 457 and T1x seem like a more worthwhile investment?

I don't have much knowledge of these and have been really trying to educate myself on this subject. I had a few questions regarding a few styles......

Seems like there's a camp that says get away from bushing dies use a full length die no button and then set neck tension with mandrel and people claim there is no issues with donuts.

Then the camp that says bushing dies help maintain the donut and gives it a spot to go. Some guys neck turn or ream them out but once again that's another part that'd heavily debated.


Then the group that says no matter what you do you will never stop the donut from forming. Most of these guys claim to leave it alone and load bullet outside of the area.
Some people say use bushing dies and no mandrel at all because you will push the donut to outside and if using bushings some people say do not cut them out since the whole neck isn't sized.

I was just curious what most guys are doing? Very interesting issue that pops up I think and with a lot of different ideas.

This is Matt's newest action. Most of them have the angled ejection port like you see on his Raider series. This is 1/4 that have the rectangular ejection port (my preference for looks). It is unfired and will come with the brass bolt knob pictured and a normal DLC coated black knob. These are two-lug, 70 degree bolt throw actions that will take Impact prefits. I just won't be building on it anymore so it's off to the next owner.

$1,200 shipped. An extra $200 if you want a Elfmann match trigger in there.

No trades.

2 long action magnum barreled actions for sale.

Top action is 300WM, RR prefix, factory barrel, round count is sub 20. Comes with trigger and Badger Ordnance rail. $500 shipped.

Bottom action is 7mm Rem Mag, blued C prefix, was going to use this on a Mk13 Mod 0 but it’s pretty far down the build list right now. Comes with trigger. $500 shipped.

Payment via PayPal F&F, Venmo, Zelle, USPS MO. Your FfL must accept from an individual, else add $35 to cover my FFL’s transfer fee. SOLD

This is probably the best factory trigger I've felt on a 92 series. I wanted a 92FS railed compact but could never find one so when they released the RDO (optics ready) model I picked one up right away. I've maybe fired 100 rounds through it. Comes with the factory box, mags, paperwork, and I added a nice set of LOK G10 grips. I've got this and a 229 so I don't need both of them as I could use the cash for other projects.

$550 shipped from my FFL to yours. If you're in Michigan I will do FTF near GR for $500 with proper paperwork.

Like new Kestral 5700 with link.
350 firm includes shipping.
pm for details.

500 rounds of M118LR AA11 ammo. LC 22 headstamped, all same lot. Was in brown boxes but broke it into loose for easier storage. Won’t include the ammo box.

$600 shipped, payment via PayPal F&F, Venmo, Zelle, USPS MO. SOLD

Impact 737R Action – $1430 shipped free (because nobody likes surprise shipping costs).

Barreled Action Option​

Want a head start on your build? I’ll chamber a CRB barrel blank (6 and 6.5mm comp contours in stock, plus several others. DM me with what you are looking for) in any of the popular calibers (special requests welcome) and thread it 5/8-24 so you’re ready to go.
Normally $2230, but Sniper’s Hide members get a $200 discount—so just $2030 shipped!

Add a TriggerTech Diamond Trigger​

Complete your setup with a TriggerTech Diamond trigger—also at a discount! Available in flat or curved shoes:
Single Stage Diamond – $2285 shipped (normally $2535)
Two Stage Diamond – $2330 shipped (normally $2575)

Current turnaround: 2-3 weeks.

Full Rifle Builds Available!​

Want a complete rifle, ready to go? I can do full rifle builds as well—just let me know what you're looking for, and we’ll make it happen.

DM me if you are interested in discussing details.

Brand new Vortex Razor hd gen 2 scope like new all accessories included brand new 4000.00 price 1800 firm free shipping with insurance.

pay pal preferred. pm to buy.

Morning all
This is Scott with Black Ankle Munitions. We have had several customers recently (numerous throughout the years) recommend we check out this forum and for some reason today became the day! For any on here that have not dealt with us before, we are primarily an e-commerce NFA shop but are ever expanding.
If there is ever anything we can help with, just let us know or hit me up directly.

*I have already reached out about the commercial sponsorship but wanted to go and get the intro out there!

$150 shipped. Zelle or PayPal F&F.

Comes with both Mlock and pic rail attachments.

Hawkins hunter DBM SA brand new. I ended up not needing this went a different way on my build. Brand new never been installed. Sold

FS: Giraud trimmer setup, will include 6BR, 6 Dasher, and 308 holders. Also included are the 6mm and 30 cal cutter head. This new would be $762+, selling for $575 shipped.

As the title says, "What gives the President power to create new government organizations?"

Not knowing a did a Google search and this is what it showed:

"
AI Overview
Learn more

While the President does have some authority to reorganize the executive branch, the primary power to create new government organizations lies with Congress, meaning they must pass legislation to establish new agencies; the President cannot unilaterally create a new government organization without Congressional approval, which is typically done through acts of Congress, not solely through executive power vested in the President by Article II of the Constitution.

Key points to remember:

• Limited Reorganization Power:
  The President does have some limited authority to reorganize existing executive branch agencies through "reorganization plans," but these plans usually require Congressional approval or oversight.
  
  
• Executive Vesting Clause:
  Article II of the Constitution grants the President broad executive power, but this power is generally interpreted as the ability to manage and direct existing agencies, not to create new ones without Congressional involvement.
  
  
• Congressional Authority:
  The power to create new government agencies and departments primarily rests with Congress, as they enact laws establishing these entities. "
  
  If this is true how does he get away with creating the "Department of Government Efficiency"?

I also found this. I haven't heard or read anything about Congress granting him the approval to do so.

Barely used. All function just fine. 2x15 round mags and 1x10 round mag. SOLD shipped for all.

Looking for a new scope geared toward hobbyist PRS/long range. Through the years I've owned most everything in the $3500 and under price tag. Always purchased used or paid full price. Was never aware of places like expertvoice or govx that offer veterans some hefty discounts. Fast forward to today, with so many options and so many big names offering discounts to veterans. I dont feel like I'll be shooting at an level that requires me to spend 4k on a new optic. Im sure they are fantastic, but prices are getting out of control. I've owned Kahles, NF ATACRS, vortex gen2 and gen 1 razors, schmidt, Leupold mk5, premier, and a wide variety. What I ended up settling with 5 years ago were Minox ZP5 scopes on my longrange rifles, and I still have a few. For my eyes, these are leaps and bounds above the atacrs and vortex stuff at the time. These could always be picked up in the classifieds for under 2k, and Minox even had a 50 percent off promo once.

So, now that I'm aware of all the fantastic patriotic companies that offer discounts to veterans. And all the new options and advancements, is there something new as good as the Minox in that 2k to 2.5k price range with the discount? Leupold and NF definately make some of the toughest and well regarded proucts, but not my preference for this application. I feel like there may be something newer, that has better glass. Maybe just go with what I know and pick up another Minox, but I got nervous when a company gets out of the game.

I've found the following to offer substantial discounts, either direct, through expertvoice, or gov x. I have never owned or tried the longrange optics from a few of these, but do notice they get great press.

Leupold
Nightforce
Vortex
Steiner (never owned )
Leica (never owned )
Burris
Zeiss (never owned)
Trijicon

Login to view embedded media

Five indicted on charges of corruption and evidence tampering. Including Chief
PD employees ODing and dying at work .
Evidence “locker” not secure - evidence- drugs and money just disappear- strangest thing
1000’s of criminal cases stand to be overturned.
Wife of one of these hero’s charged with selling narcotics from evidence room .

Selling a Pure Precision m5 Short action DBM. Takes AICS mags. 115 shipped. Bottom metal only For sale. Pm if interested.

As the title says, I'm looking to get some real world feedback from folks who use or have used professional money/investment management services. Based on the number of TacOps, AI and MRAD shooters here, there must be a decent few of you Alternatively if you work in this line of work, I'd love to pick your brain privately.

I'm pretty fortunate to make a pretty decent living and have always lived below my means. I've mainly been saving cash and maxing out retirement plans, but over the last several years have been investing in equities. My original plan was to split $XXXX per month between DJIA, QQQ and SPY index funds, with lesser amounts going towards some other ETFs and individual equities I thought had promise.

With the markets only going up and VIX staying low, however, I've been putting off the investments into index funds worried that a sharp correction is coming.

I've realized that it may be in my best interest to hand this job over to someone else and have been speaking with a JP Morgan private client banker and investment manager. They do seem to have put together a pretty solid plan for managing all aspects of my finances and attaining life goals but now we're at the make-a-decision phase and I'm a bit resistant to change, so getting cold feet. I was thinking some real world feedback may help me come to a decision.

Kelbly LH SA MAG Bolt 90° shot maybe 20 rounds with it and bought a 75°. Was on my Atlas Lite but will fit others. $200 shipped.

J.W. Fecker small game scope, 4 power with post reticle. Has Fecker mounts, and caps. Tube has nice even patina on it, glass is clear and tube body has some minor rash, nothing serious. I don’t have mounting blocks with this one, just the scope and external rings. Asking 650 shipped, PP F&F or you cover fees, USPS money order, or FTF if local. Let me know if you have any questions