In addition to the beatings, defendants with depraved indifference, did nothing to restrain each other, did nothing to stop the beatings and failed to immediately order medical assistance for Mr. Brooks," the indictment said.

Also charged with GANG ASSAULT- this could be a new trend when a GANG beats someone to death no matter the colors they wear

A money quote from the article - Only took 96 days to decided that 12 men beating a handcuffed man- TWICE is murder but I guess better late than never.

17 corrections officers a few real cops and several medical personnel just stood around and watched -

Take off from an SP10.

18 inch
308
rifle length gas
.750 gas block diameter

Includes the Seekins adjustable gas block and gas tube.

I borescoped it and there is no wear to the throat. I would guess there were VERY few rounds fired out of this.

The barrel is slightly ugly under the gas block from someone not loosening one of the screws before removal. Doesn't affect function and it's covered by the gas block so you won't see it.

300 shipped OBO.

No trades

Venmo gift or zelle only. My PayPal is locked.

Like new condition. Has 21 rounds down the pipe. Comes with 2x21rd mags and 1x17rd mag, along with the original case and paperwork. $525 shipped to the ffl of your choice. Venmo or Paypal FF. I’m not interested in any trades.

Used in great shape. Glass is clean and clear

$800 shipped
Apple Pay Ppff Venmo Zelle

I have a Mcmillan HTG that I need opened up for M5 bottom metal. Prices seem to vary widely. LRI 200.00. Unknownmunitons 125.00. Gap 105.00. Badger 75.00. Riversbend gun company 75.00. Trust badger but they specifically say their inlet is only for badger m5. I thought they were pretty much the same. Not sure I'm going to use Badger so that kind of concerns me. Was thinking Hawkins, maybe. Anybody got any recommendations or experience with the above or others. Want the work done well but don't want to waste money either.

As title says.
600 shipped

I am finally going to get into night vision so thinking the heard a little bit to clear some funds. I have an LMT that will stay in the stable and also have a Geissele URGI, DD RIS III 14.5 and a BCM MCMR 14.5 looking to get rid of two of them and only keep one. Which one would y’all keep out of those three?

All,

Have been working through what to do with my Nightforce NX8 1-8 in FDE.

Want to trade for a high-end AR10 complete upper. Wilson, LaRue, Seekins, LMT, etc. No Aero or PSA.

Prefer 18 inch .308 or 18/22 inch 6.5 CM.

Photos below. Will include NF ultralight cantilever mount in FDE.

Good evening. I am trying to find some LE courses for advanced sniper training / Urban or public venue sniper training such as stadiums / or High angle courses. Please let me know what you have or if you have been to a course please let me know if it was worth your time and money. I have to pay for all my own courses so I am trying to find courses to go to. Thank you in advance.

Looking for a new or used Impact 737 or NBK SA action RH. Lmk your price. My FFL will receive from individuals.
I'm located in Clarksville TN if that helps. Thanks!

This has literally been used one time.
I opened it sometime in January and loaded 50 roads. I ended up getting my Hornady dispenser back from warranty replacement way faster than expected. No issues with the dispenser. Works properly. But I did misplace the accessory bag with the calibration weight,j hook(easily made from close hanger),and the brush.
Everything else is there to get started. A calibration weight can easily be bought off amazon- thus I've priced it accordingly.

$165 shipped
from middle TN (within reasonable distance)

WTB Shot Marker System

Lyman Gen 6 powder dispenser. Purchased new December 26

$180

Looking for the name of the fiber optics that connect on to the Send It and make it visible by the eye piece of the scope. I don’t know what it’s called, please educate.

Just as title says I have a vortex viper hd 20-60x85 spotting scope that I used once then it has sit in the safe since the box is taped together as my wife tried to throw the box away twice thankfully I saved it. Also it has a neoprene cover Aswell as a window mount. I just got it back from vortex they went through the whole thing and serviced it did a new gas purge and all. I want 550 plus fees and shipping thanks in advance

Selling my Pulsar Trail 2 XQ50 LRF thermal scope. Includes everything from factory. Also has a Bobro QD mount and 1 extra battery. Excellent condition. $2000, buyer pays shipping.

I have a barely used AEA SS .30 cal semi carbine.
Comes with threaded barrel , Two magazines, picatinny rail handguard , MDT Folding adjustable stock, Eotech ( Clone not authentic) red dot , that works perfectly, and air compressor!
I also have some 30 cal pellets I will trow in!
Nothing is wrong with the set up ; just not shooting it anymore!
I am asking $700 shipped for everything

Just as title says I have a custom 6creed with a mullerwrks barrel it’s a 20inch 10twist .130 freebore threaded 5/8x24 for lighter bullets. I built it to coyote hunt with and I shot 87vmaxs through it. There is 127 rounds on the barrel so just got broke in and it will absolutely shoot them threw one hole the action is a defiance tenacity black nitride with integrated recoil lug one of the good ones it has a Jewell trigger in the pic I had a trigger tech diamond in it an changed it and it is setting in a bergara b14 hmr stock with a good bottom metal for mag feed. This gun is a shooter and will make someone a great varmint rifle no matter what the varmint is you can pm me here for more info thanks in advance. There is not a mark on this gun and it will absolutely shoot.
I want 1500 plus fees thanks in advance
Ps: the rifle will b shipped from me to your ffl unless you wanna pay for a ffl near me to ship it for your ffl

GONE
I have a brand new ,never Fired WOT trigger , comes with anti walk pins and wrench asking $350 shipped

I have a 6601 that's still mounted and tons of parts will unmount when it sales. This mount was bedded when I received it and it's the best fitting mount I've seen on a spuhr.

6601 mount only $215 shipped

All the parts (screws and stuff) and accessories. (see below)
Is over $340 in parts listed below

I'll do $265 shipped
a bunch of new screws and stuff listed and the below.
1) A 0003
2) A 0001
2) A 0012
1) A-0029

Anyone happen to have a Vectronix BT adapter for either the Vector IV/PLRF or the Vector 21 that I might borrow for a bit? Need a unit to test code for Field Firing Solutions and they appear to have gone out of stock everywhere. I could also use a PLRF25 BT early non-AB version, but that's a big ask.

I’m about to give up on getting a TBAC Magnus K RR, can’t find one anywhere. So, leaning towards an Abel Theorem or Theorem-S, possibly the Abel Biscuit. Looking for recommendations on the Theorem vs. Theorem S. Is it worth it to wait for the TBAC?

Suppressor will go on my MPA Matrix Pro, 6.6cm. I shoot mostly recreationally but will be shooting some PRS also.

First article I could find not behind a paywall- I’m not a regular nbc reader.

Be the way everyone seems to be shitting their pants over this guy - the the axe he has to grind against these people it should be Highly entertaining if nothing else . The first fbi director in at least my life time that’s not a bought and paid for criminal syndicate asshole .