I just got confirmation that my Tikka T3X super varmint in 223-1-8 twist has shipped. Anyone here one in 223? Or 308! Was wondering how you like it? Accuracy? Dislikes? Etc.

In a few words: with those tight tolerances, there is a certain way i have to push the bolt forward, otherwise i get some resistance to the point that the bolt gets almost stuck. If I push in a certain way, the cycling is fine and pretty smooth.
With the few bolt actions i used during the years (cz 527 and bergaras b14s) the bolt was much sloppier but almost in any way you run the bolt, it worked.

The bolt is clean and the action is clean, too. What i am gonna describe happens with and without lube.
The action is a defiance deviant ga hunter and the finish is the original black one that defiance applies on the bolt and on the action itself. It is mounted via the proprietary manners mini chassis on a manners stock. It uses aics mags. I asked for the standard tolerances that defiance applies, i didn't ask for the increased clearance bolt.

The action runs pretty smooth with and without the magazine inserted qhen there are no rounds in it. It just gets stuck when not pushing in a straight forward way, especially when applying leverage on the bolt, resulting in force being put more towards the side of the bolt.
When pushing straight or, better, applying some force towards the non bolt side, it runs smoothly.
With live cartidges it is more or less the same but the cycling is smooth only if i push in a certain way, there is less margin of error when chambering a round. If i don't push in the correct way, the bolt gets a lot of resistance. If i push strongly it works anyway, if I push slowly but applying the force in a correct, more centered or towards the opposite side of the bolt, again, it works.

Is this normal for a new custom action? Maybe i am just used to sloppy factory bolts which gives more margin in the cycling process.

Gentlemen

I have a handful of brand-new rifles for sale if you're interested, please PM me and I'll reply at my earliest. When you PM me leave your first name and a good contact number. I have two customers leaving the United States and will not be able to bring their rifles or silencers.

Tac 70 ( Manner's T4A stock ) in 338 ( Surgeon XL )

Delta 51 308 ( Surgeon 591 ) with Badger EFR
X-Ray 51 308 ( Surgeon 591 )
Tac Ops Green Hornet ( Ruger 77-22 )
Delta 66 300 Win Mag with Badger EFR on a Surgeon 1086 , mag fed
There is also a Tac Ops 338 Titanium silencer
I believe Qty. 3 or 4 Tac Ops 30 cal. Titanium silencers

There's also a Red Ryder BB gun with a PVC silencer with no serial number please don't drop a dime with the ATF on me

Serious inquires only please no tire kickers or ball breakers we are really busy at the moment...

Thank You
Mike R.

Greetings,

I've been on here for a long time. Don't post much, but read so much. This is where the experts talk and I'm no expert. I do appreciate you guys and your knowledge base.

I've never had a really nice optic or a very reliable bipod. I always bought EO Tech and Trijicon Acog for optics. I've used all kinds of cheaper bipods and want something solid and versatile now.

My gun iis an IWI Tavor 7 with a Manticore Arms fore end. This means that I have to use the Mlok to convert to picatinny rail. This is not a very accurate rifle, but I like it. I'm not in the game for .25 moa, I'm just looking for a good, reliable 7.62.

I've had my eye on the Atlas for a while and wanted to know what you guys think of the BT46 LW17 as an entry level upgrade to the junk I'm used to. As a boy, Harris Bipods were the way to go. Times have obviously changed and I want a bipod that will cant and pan.

Please let me know what you think and if this is a good option, I would like to know what accessories are a must.

This is a battle rifle for me. My go to gun. I've been overseas and I'm not impressed with the 5.56.

I just bought an Elcan Spectre 1.5-6 and a Trijicon RMR Type 2 to go on the picatinny rail on top.

Thank you in advance.

I am trying to find a trajectory correction formula for metric units and mrad. I have no problem finding a mrad formula where it butchers mrads with inches and yards.

Mrads and centimetres and meters

Have reached out to Bergara but am having trouble getting my hands on a hmr premier/ pro bolt. Wanting to upgrade and replace my hmr bolt.

Let me know if you have one.

Thanks.

Foundation Samson Impact 737R Centurion Grip RH BNIB
-Impact 737r inlet RH
-Upgraded Black Micarta
-Brass insert and ARCA
-Cut for Hawkins M5 bottom metal

The stock is brand new and has never had an action mounted. I recently purchased it new, and I love it, but the grip is not a fit for my hand. Includes all weights that it comes with new

I might consider a trade for a new or like-new Samson with the Genesis 2 grip or new or like-new 737r barreled actions.

$1800 shipped

Can someone provide a range coefficient chart going out to 2000+meters. No yards please.

Hey everyone, I am wondering how you can determine caliber coefficient. Not to be confused with ballistic coefficient though bc is required to determine this. The CC is a number derived from the bc and the caliber your are shooting.

I may not be calling it by the correct name. It’s part of the wind deflection calculation.
RC x (WS/CC) x WV = #MRAD x 3.438 = #MOA

So for your CC for a .308 win in this 4
A 300 win mag would be 5

What’s the formula to determine the CC for different calibers. Please provide the forms and an example.

Title says it all, please PM with what you got!

Firstspear preferred, but surplus or similar items are also of interest!

To my knowledge there is timney at 8oz first stage 1lb. Jard at 9 to 11 oz or 16 to 20oz, or Bix N Andy Dakota at 1lb. Anybody used all 3 by chance?
Thanks

new guy from New York here

Selling Once fired Peterson LRP .308 (fired out of a AI)

$60 shipped per bag. (100)
Flat rate for all bags

With all my brass sales I’ve done, you will receive a few extras.

WTB: Trijicon Tenmile 3-18 MRAD

Looking to spend $850 -- Send me what you've got.

**I won't PM you first, anyone else doing so is a scammer** If you have issues PMing, comment here first.

Want to trade? I have a P229 Legion (non-OR) that I'll trade + cash to you.

I inherited several rifles (I'm not a gun guy to speak of at all ) any information I can get would be appreciated, when my old neighbor passed ( my friend) I was given his rifles, he was from the Virginia's, hunted and fished his whole life. I took this particular rifle in to be educated. Told the fellow behind the counter what I had been told about the rifle. He said that I had been told wrong that the rifle was not a military issue 243 03A3, after quickly checking it out said he needed to apologize. That he was wrong . That he had never seen anything like it, the size and weight is mind boggling, I'm attaching a few photos , help me if you can, and thanks

Parting out a couple of winter projects.Never fired or even left my gun room.
1 - P320 FCU With Armory Craft adjustable trigger . Absolutely amazing trigger $265

2 - P320 FCU with GrayGuns Competition trigger kit. Another amazing trigger $265

>>$265 to your ffl With a takedown lever<<<
Thanks for Looking
Cross Listed

1 brand new grip module
Parting out a winter project

- X-Full grip module stippled by Frank Castle Customs grip module has Magwell and weight. $110 shipped
Thanks for looking
Cross listed

Selling a very nice piece of American military history. I purchased it ~4 years ago from a private owner who was a relative of the soldier that the rifle belonged to during WW2. Its current configuration/shape is the same as it was when it was brought back from the war. I’m only selling because I have multiple of these rifles and was lucky enough to have just purchased an A4 sniper model, so just hoping to recoup some funds.

The overall condition of the rifle is very good. The stock is excellent, with no major defects in the wood and has a very prominent “RA-P” cartouche stamp on the left side.

The parkerized finish on the receiver is very good, with only slight signs of wear.

The bluing on the bolt/bolt parts, the barrel, and bayonet lug, is good-very good. Typically signs of light wear on the bolt and bolt handle. The muzzle end of the barrel, and crown, do have some slight-moderate fading of the blue, but is still evident.

All mechanical parts function as they should (the rear sights, the bolt, the magazine, and the trigger). The bore is very bright with no signs of pitting or rust. The rifling does show signs of use, but is still very evident. I have shot this rifle 2 or 3 times, and it shoots remarkably well for its age.

The serial number on the receiver dates its manufacture to June of 1943; which also suggests that the current stock is original to the receiver because of the cartouche stamp “RA-P”, indicating inspector Peterson of the Raritan Arsenal, who was the chief inspector from 1942-1946.

The barrel is stamped RA 8-44.

I’m sure I missed something, so please feel free to reach out with any questions!

Asking $1200 shipped to FFL

Looking at a 6BR barrel for the AT-x, just want to make sure I get this right. Do the Gray Ops AW 6BR mags work reliably in the AT-x? I do read there's a mag block kit(HRD?) but spotty reviews? Any other options for this rifle? Aside from bending lips and pushings rounds forward, etc.

Let's please keep it to the BR.

Tks

I have a like new arms 39 A2 plus mount with all hardware. Sold

Noveske 10.5 CHF 5.56 barrel. Around 300 rounds. $300

Bking A2 upper with M4 ramps. No rounds through it. Sold$$$

All prices are shipped

Feedback on ar15 and tacswap

Another one from my brother's estate........

I have a smoking deal on an AI AX 50, Elite Iron Steel .50 cal bipod, 3 mags, and 800 rounds of ammo.
400 rounds or Hornaday Amax 750 match, 320 rounds of IMI Ball, 80 rounds of Barrett Ball, plus another 10 rounds of brass projectile ammo, yea I know, that's 810 rounds................

Rifle: $12500.00, Bipod $720.00, extra mags, 2 X $250.00, Ammo, lowest price on Ammoseek yesterday...more than $5000.00...........total...........$18720.00..........

$12500.00..............and if you are within 1000 miles of where I live, near KCMO...........I will deliver it to you........

I apologize for the shitty pics..........if you want anything specific, let me know...........

Timney HIT Trigger
Impact Action
Manners PRS stock with mini chassis
AI 5 round mag
26” Hart 8 twist MTU Improved barrel with 385 rounds down pipe
Area 419 Arca rail/bump stop
Scope, rings and muzzle brake not included. Will sell scope and rings separately.

Asking $2700

Came with a chassis I got but has never been installed. $75 TYD via Venmo/PayPal. Ships USPS with tracking.

Custom LH 7 Mag

Defiance Deviant LA
26" Ace Remington Varmint contour 1:8.25 twist chambered by Manzella Precision fluted by boltfluting.com
Mcmillan carbon A-3 adjustable with picatinny rail
Hawkins hunter DBM with belted magnum magazine
Triggertech Diamond trigger

Everything is brand new minus the action. The multicam dark gray cerakote on it and barrel is new. Zero rounds. Invoice for just the barrel and cerakoting was $1315

$2600 shipped

PP FF/Venmo

Only selling because I got some Area 419 holsters. $60 TYD for the pair, both in like new condition. Payment via Venmo or PayPal. Ships USPS with tracking.