Guys what would be the most accurate 7.62X39 piston upper with 10" 0r 12" barrel? Using Russian ammo such as Barnaul, Belom and Golden Tiger

For those who might be looking for a decent inexpensive scope, or specifically the Vector Continental, I've put my thoughts and experience down for those who might want to know more:

Vector Continental 5-30x56

Looking for a Rimx action or BA, pm me if you have one and what two numbers the serial number starts with

Boyd’s Pro varmint stock for a CZ 457.

The rifle came in this stock when I bought it new.

The stock has been modified for my daughter and comp shooting.

Message me for more details and pics.

$100 OBO shipped/insured

SOLD
5 New Boxes of Federal 210M Large Rifle Match Primers.
+ 2 New Boxes of Winchester Largs Rifle Match Primers

Are there any stores on here that offer discounts to members that sell Rix K3 scanner? Thanks

Schmidt Bender PMII 5-25 H59 reticle w locking turrets


Mounted to my AI 338 LM, but never used or shot. I dont have the original box etc since its been many years since I have had this. Condition is as is


EDIT: asking $3000 OBO shipping and insurance included in the price.

STDC angle indicator with Spuhr A-0004 qr mount. $150 shipped

New Spuhr 5002. Took it out and briefly mounted but decided to go a different route. $375 shipped.

WTS: Nightforce Unimount, 34mm, 20MOA, 1.44" height. works as expected, but screw has some wear. 159 ship
Take zelle

Spuhr level mount, $40 shipped PayPal or Venmo

I'm looking for a MCX Spear Lt 5.56 pistol upper with a 11.5" barrel.

Nightforce NXS 3.5-15x50 Mil-R reticle (C527 I believe)
Glass is excellent, scope is as well, just has scope ring marks as seen in the pictures

I tried to get a picture of the reticle but my cellphone camera would switch to a different camera every time it came into focus

$1500 Shipped

Only trades I would consider +/- cash are
Leupold mk5hd 2-10/3.6-18 mil illuminated
Nightforce atacr 1-8/4-16/4-20 mil
nightforce nxs 3.5-15 FFP /2.5-10 mil
armasight sidekick 640
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)

$1495.00 shipped CONUS sold to SniperEnvy

Zelle or check only, no trades

Blaser/Tier One 20 MOA mount - not included

Excellent condition, includes original box and manual etc

So is there anyone planning on getting anything new this year? After shot show and a few new rifles showed off. Anyone planning on getting something new this coming summer.

Great condition tripod caddy
SOLD in 4min from posting.

NOT LOOKING FOR TRADES

Selling a 700 s/a inlet XLR Envy Pro with C6 stock and long LOP spacer. I have the full PRS Pro Comp weight kit, which includes the three internal weights, four C6 weights, six forend external weights, the short extended Arca weight, and the long NV bridge.

Very good condition. If not in the safe, it’s been to a static range 3-4 times. No damage or blemishes I’ve seen other than some light markings on the Arca rail. The external forend weights have been spray painted.


Price: $1150 shipped UPS Ground. PayPal or Venmo ok, as long as I net the sales price.

Hello all, got my first borescope and used it on a (new to me) AR10 and was told the rifle had less than 100 rounds on it. I know, everyone says that.

But i noticed what appears to be some voids, almost like some recesses in the chamber, seemingly where two metals meet. But i'm a complete novice on this, can i ask for some opinions, particularly starting around the :30 second mark

Does this chamber and barrel look consistent with a rifle with a sub-100 round count?

I'd love to hear people's opinions.

Or maybe its me

OK
RimX action
Spuhr mount with level (lol)
Razor 6x36 G3
MDT send it
Light in objective
Plumb line and shadow on wall

I leveled Spuhr mount with its bubble. Then flashlight in objective to plumb line shadow on wall. Nothing else levels out.
Put level on scope, mount, or gun everything is canted. I am going with plumb line and gravity.

I do some fine tuning trying to get scope, mount or gun level with bubble and MDT send it stays solid green saying its good () the whole time even as plumb line shadow shows me how crooked the scope is.

The part of the zermatt origin bolt (firing pin) that connects with the trigger has become loose and I can wiggle it
back and forth and am not sure if/how I'm supposed to tighten it? I'm guessing that hole is
where the set screw is, but I'm not sure if I'm supposed to tighten it while inside the bolt like in the first picture
or remove the firing pin and tighten the screw while not in the bolt like in the second picture? If anyone knows how
I'm supposed to tighten and service the firing pin/bolt let me know.
Thanks,

Clearing out some space in the safe. All prices are shipped, Payment via PayPal F&F, Venmo, Zelle, USPS MO. Traveling this week but will ship over the weekend.

1. Robar-ish 308. C series, nice early HTG stock, has clearly been worked over. Murphy Precision 10 MOA rail. $950 shipped.
2. Early Remington 700p in .223. C Series, parked, comes in its original wood police stock. One of the scope base screws has broken off in the receiver, should be easy to get out, I just never did anything with it. $900 shipped. SOLD
3. USSS JAR clone, built by Keith Johns at Pheonix Custom Rifles. 300 WM, action trued, Lilja Mk13 mod 7 profile barrel, Surefire 4P flash hider. Geissele super 700 trigger, AICS AX chassis with 1 mag, RRS BAXAR15 Arca plate, and black+FDE skins. Comes with 20 MOA scope base and chassis rail as pictured. $2,850 shipped. SOLD





View attachment IMG_3712.jpeg

Once again out of stock everywhere. Anybody willing to rent me one so I can do a barrel swap? Thanks

Atlas BT10-LW17 V8 W/ADM-170-S Lever
$200 shipped

I shot Altus' AI classic this weekend. I used my better half's 6mm Creedmoor. It's an Impact action with a Proof prethreaded competition profile barrel. The rifle has maybe 100 rounds through it until Saturday. Hornady 108gr ELD-M ammo was being used. The problem I had through out the match was when I seated a round and time was called, more than once (SEVEN times actually), I would go to clear the rifle and the unfired round would come apart with the bullet stuck in the barrel and the case and unfired powder ejecting from the action. A couple people suggested that the ammo is crappy, another couple more said carbon build up. I've never had a problem with Hornady match ammo before and I run it in my 6.5cm with no problems...

Steiner 4-16X50
G2B Reticle
Great condition, no visible flaws
Vortex rings can be included for $75
$1000 shipped