So I’m looking at the leupold mark 4 spotting scope and I’m seeing prices vary by $600+ by just the reticle. Am I missing other features or is the tremor reticle worth the extra cost? I’ve tried to find threads covering this but haven’t found any yet

Reply as a comment here then send a PM.
Open to prices, looking to mount on a gas gun, so sale with a cantilever mount is the goal.

Edit: Looking for a MIL based one.

FYI putting this WTB request on hold for now, need to save up some more before being able to commit.

Atlas Artemis with around 500 rounds through it. It comes with the brass grip panels, soft case, 2-140mm mags (if legal in your area)

$7250 shipped to your FFL

I'm looking to offload some things I don't use that are just sitting in the safe. I have become pretty invested in precision rimfire, so I want to trade for higher-end rimfire equipment. I can send additional pictures upon request and would be more than happy to Facetime or call!

I am extremely particular about my stuff, so most of these are safe queens with little to no use.

If you want more infomation on particular builds/parts just shoot me a messsage!

• Daniel Defense DDM4V7 w/ Vortex Razor 1-6 in a Reptilla Mount - $3,795​
• Zastava ZPAP85 5.56 (Unfired) - $1,400​
• Glock 17 Gen 5 MOS w/ Trijicon RMR & Surefire X300U - $1,450​
• Smith & Wesson M&P 2.0 9mm w/ Trijicon RMR & Surefire X300U (Unfired) - $1,350​
• The Green/Black rifle is a 14.5 Build w/ Vortex Viper PST in a Bobro Mount - $2,895​

In re: the Wisconsin Supreme court victory by the dems? I mean, it's great we in FL kept things good by taking both special elections, but I'm a bit worried that this libtard judge in Wisconsin might "re-gerrymander" those districts to cause us problem in the mid-terms.

What do you think the "end-result" impact is going to be?

Atlas BT65 NC with Henderson ARCA clamp and spiked feet.

$250 Shipped

500ct box $165 shipped

Also have 1X fired IMI mil brass at discount for buyer if desired.

Gotta get started on the new Louisiana ski resort. Ski Cajun I’ll call it. Also gotta stock up on all those down stuffed parkas and insulated underwear. Powder gots to be optimized for sub freezing temperatures. Targets gotta start being painted Black

Cause, forget all this shit about climate change and the poles melting and the lefties lattes getting heated naturally by the planet heating up cause we’re HEADING INTO A NEW ICE AGE. .


Scientists just confirmed that Earth is slowly tilting toward its next ice age.

Experts have long suspected that changes in Earth's orbit play a key role in triggering ice ages, and now a new study has confirmed it.

Researchers from Cardiff University have uncovered a precise link between Earth's orbital cycles and past glaciation periods, providing a powerful tool for predicting future climate fluctuations. By analyzing deep-sea fossil records, they discovered that deglaciation—the end of an ice age—is triggered by a specific relationship between Earth's axial tilt (obliquity) and its wobble around the Sun (precession).

Meanwhile, the onset of an ice age appears to be driven solely by obliquity. This breakthrough explains why ice ages have occurred in predictable 100,000-year cycles and suggests that another one is due within the next 11,000 years.

While this discovery offers valuable insight into natural climate patterns, researchers warn that human activities, particularly greenhouse gas emissions, are already altering Earth's climate beyond its natural trajectory. Understanding how ice ages naturally occur is crucial for accurately assessing the long-term impact of human-induced climate change. As Earth's tilt continues to decline, signaling the start of the next glaciation, scientists emphasize the importance of factoring natural climate cycles into future climate predictions. The study underscores the need for sustainable action today, as decisions made now could shape Earth’s climate for millennia to come.

More details/photos: https://www.beautyofplanet.com/stud...-ages-and-theres-one-in-the-next-11000-years/.

Mark 4 HD 8-32x56 PR2 Mil with Masterpiece Arms 1.125, 0 MOA mount.

$1050

Selling this guy for $100 $85 $80 shipped. Comes with one spacer.
PP, Venmo, or USPS MO.

Uses in good condition. Some light scratches on the knobs and body buy all superficial.
Illuminated Mil reticle
XLR rings and lense caps are included
Made in JAPAN
MPN 800363
$460 shipped lower 48

Selling this Llama chambered in 380.
Has some handling wear and a small scuff on the right rear of the slide.
$280 shipped.
PP, FF, or USPS MO.

Used but very good condition other than a scratch on the eyepiece anodizing that is shown in the picture.
$850 shipped lower 48

I have a like new, never taken out of garage, 322c tripod. It's nice and sturdy i just decided to go a different route. Has an arca mount also. I have original shipping box and bag it came in.
$325 shipped PP F&F. No trades
Video call to be had with buyer.

Is a bullet still stable/accurate after it goes subsonic?

I know that my precision AR is a tack driver out to 800 yards, but falls off the face of a cliff at 900. Thinking that is because at 800 yards bullet is going transonic. So thinking about various cartridges, what is the max range? I ran through the following calcs:
Seems like many are shooting those cartridges past the above distances I have. Also, what would the advantage (other than energy) be for a 338 over a 300WM at a mile and wouldn't you be able to take a 300WM as far as a 338 accurately?

I want to take my 6.5 CM and try shooting at a mile (the bullet will be at 1050 fps or m=.94) - will this be possible? My 300WM is only a 2 minute rifle so no point in trying to take it that far & I do not have a 338.

Anyone here that have experience with Guide’s thermal clip-ons?

More specifically their TB Pro series:


These are starting to trickle into the European market, at a price that is reasonable.

I know it’s not Oasys units, but I wondering how these would stack up against Pulsar units.

Hi
I got a used Barnard S rifle. Tested it out and seemed fine.
Now, if I close the bolt and lift it, there's just a tiny lift pressure. More or less the same as my other Zermatt rifle. If I close the bolt, pull the trigger, with no round in the chamber of course, the lift is considerably heavy than without pulling the trigger. Is this normal? What causes this?


Thank you

Spring Cleaning/Moving Sale

• JP Gen2 Silent Captured Spring, standard weight for AR-15 - Like new, ran in a 300BLK SBR for 40 rounds, tops. SOLD
  
  
• Complete B5 Systems color-matched set consisting of a Bravo Stock, Type 23 grip, and the grip plug (closes off end, dampens, and holds two AA, 123A, or CR2032 batteries). Coyote Brown color. Mounted on a gun but never taken out to the range, just went a different direction with the furniture color.
  $55 shipped for all three items SOLD
  
  
• B5 Type 23 P-Grip, FDE color
  $15 shipped (or add it to the B5 set above for $5) SOLD
  
  
• Arken Rigid Precision scope mount, 34mm dia, 1.5" ht, 20MOA. New. SOLD

PayPal F&F no notes or Venmo. DM me if interested in any of it. Thanks!

All items sold, thanks!

Don’t know much about the guy personally but he was one of the best actors of his era and passed away today. Was on his game in the movie Heat.

I remember the first time I saw Heat during the shootout scene that mag reload felt authentic and very real like he was fighting for his life.

The infamous mag reload scene.

Login to view embedded media
Login to view embedded media
Login to view embedded media

Athlon Ares ETR 3-18x50 MIL APRS6 FFP. Brand new never mounted bought on Midway a few months back, but never found a rifle I wanted to mount it on. Includes original box, throw lever, scope caps, sunshade, and manuals.

$545 shipped and insured.

I have this crossposted on Reddit GAFS where I have 225 confirmed trades under username AlternativeStation29.

Message me if you're interested.

I can accept payment through discreet PayPal FF, zelle, cashapp, or venmo.

Gents,
I need one. If you have one of these old boys sitting in your safe / bench and would like to part with it, LMK.
Thanks
ST42

I'm getting a rifle with a 26 inch varmint barrel and a 1 in 12 twist, will 55 gr. fmj stabilize past 200 yds.

Selling my Mk5 HD w/PR1 reticle and illumination. I bought this scope off here 2 years ago and did not get a box or accessories, so scope only w/ flip caps $1,750 shipped to lower 48

I received these in a trade and don’t need them

The mag is cmmg barrel and bcg are unknown

200 shipped obo

Hi guys, I'm looking for some opinions on this firing pin. Without going into too much detail I just want to know if you think that the obvious asymmetry (zoom in) is something that could cause issues with light strikes. I feel like it's dragging and binding on the bolt body. I'm getting way too many clicks and with 3 different primers.