Spring Cleaning/Moving Sale

• JP Gen2 Silent Captured Spring, standard weight for AR-15 - Like new, ran in a 300BLK SBR for 40 rounds, tops. SOLD
  
  
• Complete B5 Systems color-matched set consisting of a Bravo Stock, Type 23 grip, and the grip plug (closes off end, dampens, and holds two AA, 123A, or CR2032 batteries). Coyote Brown color. Mounted on a gun but never taken out to the range, just went a different direction with the furniture color.
  $55 shipped for all three items SOLD
  
  
• B5 Type 23 P-Grip, FDE color
  $15 shipped (or add it to the B5 set above for $5) SOLD
  
  
• Arken Rigid Precision scope mount, 34mm dia, 1.5" ht, 20MOA. New. SOLD

PayPal F&F no notes or Venmo. DM me if interested in any of it. Thanks!

All items sold, thanks!

Don’t know much about the guy personally but he was one of the best actors of his era and passed away today. Was on his game in the movie Heat.

I remember the first time I saw Heat during the shootout scene that mag reload felt authentic and very real like he was fighting for his life.

The infamous mag reload scene.

Login to view embedded media
Login to view embedded media
Login to view embedded media

Athlon Ares ETR 3-18x50 MIL APRS6 FFP. Brand new never mounted bought on Midway a few months back, but never found a rifle I wanted to mount it on. Includes original box, throw lever, scope caps, sunshade, and manuals.

$545 shipped and insured.

I have this crossposted on Reddit GAFS where I have 225 confirmed trades under username AlternativeStation29.

Message me if you're interested.

I can accept payment through discreet PayPal FF, zelle, cashapp, or venmo.

Gents,
I need one. If you have one of these old boys sitting in your safe / bench and would like to part with it, LMK.
Thanks
ST42

I'm getting a rifle with a 26 inch varmint barrel and a 1 in 12 twist, will 55 gr. fmj stabilize past 200 yds.

Selling my Mk5 HD w/PR1 reticle and illumination. I bought this scope off here 2 years ago and did not get a box or accessories, so scope only w/ flip caps $1,750 shipped to lower 48

I received these in a trade and don’t need them

The mag is cmmg barrel and bcg are unknown

200 shipped obo

Hi guys, I'm looking for some opinions on this firing pin. Without going into too much detail I just want to know if you think that the obvious asymmetry (zoom in) is something that could cause issues with light strikes. I feel like it's dragging and binding on the bolt body. I'm getting way too many clicks and with 3 different primers.

In excellent condition, low round count. Under 100 perhaps, for sure under 150. Includes a Spikes melonited gas tube. Hard to find these days.

$135 TYD via Venmo/PayPal. Ships USPS with tracking.

Excellent condition. Includes everything it did new, box, cover, battery, a billion mounting screws, etc.

$SOLD TYD via Venmo/PayPal. Ships USPS with tracking.

Can’t make this match. $250 and I’ll contact md to switch the names

Wanting to buy a Solus long action, plus if you have a 7PRC 20inch carbon attached to it but I know that is a long shot lol

Waited on ATV4, sold 2 RCBS chargemasters in 2022

Got ATV4 Spring 2022. Wait! I need a shim? It sits precariously atop the stock scale cover which was not made for weight atop it? the motors bind up over 90 degrees? F-this I'm selling and it (at a small loss) and getting this awesome supertrickler that's coming out!

SuperSpiller comes out. I become a beta-tester with a guy named AH. We test HUNDREDS of software iterations. There is no software fix for that stupid vibratory tube and its temperature sensitivity. I sell it, in anticipation of the Ingenuity Precision in FALL 2023.

The IP is delayed for YEARS! AH sells me an ATV2 (with V3 software) to get me by, 6 months AFTER the advertised IP release (summer 2024). What a primitive POS! I struggle along, awaiting the IP. I polish the trickler tube, I change the belts, I superglue loose parts....But it's never quite right, and the IP never comes....It's now early March, 2024....

So I buy ANOTHER V4, which I received today. Easy to set up. good instructions. Still sits atop like a house of cards. But an elegant machine with great software, and easy peasy bluetooth, and an intuitive App!

After all this frustration for almost 3 years, it is like ECSTASY dumping charges. It just WORKS! l'm in HEAVEN!!! (I fed it AR-COMP, easy test, no fat stick powders like H50BMG, RL50, or n570, to kill this buzz!)

But now I've dumped 100 charges, and I have to empty this fucking thing. Wait, what? OK, take off the hopper. Now what? unplug the fucking wire? WHAT? Shake it like a shank-n-bake chicken? What about these windows? These stupid fucking "windows" on the front and the rear? Oh my fuck, now there is powder all over every-fucking-where and I remember why I sold this POS almost 3 years ago!

But, TBH, this is the one I will keep. Maybe even after IP full system comes out...get another scale, run two of them for different powder morphologies....?

Can’t make the match. It sold out almost immediately. $250 and I’ll email the director to get the names switched over.

JC is out of stock again so looking to pick one of these up. Filled or empty since this is for an experiment with alternate fills anyways.
If you don't have positive trader feedback move along.

Want to get a suppressor for PRS shooting. Shooting a traditional PRS gun - heavy bolt action. Not so much a suppressor as much as something that will control muzzle flip so I can better spot my shots. Will not shoot with a brake which is what 90% of what PRS guys do. Already losing my hearing.

Anyway, considering Area 419 Maverick, ThunderBeast Magnus RR or HuxWrx Flow 762 for PRS. Don't like that the magnus is not modular (cannot change length or shoot w/ or w/o brake) so in that regard prefer the Maverick. Somebody I shoot with has a Flow 762 which he likes a lot and says that he can spot all of his shots with it (heavy PRS rifle & 6.5 CM).

Looking for comments from those who shoot PRS or have experiance w/ the listed suppresors.

Looking for a 737 or nbk 223 barreled action not to picky

• MDT ORYX RIFLE CHASSIS - $430
• MDT VERTICAL ADJUSTMENT BUTTPAD - $100
• MDT ORYX CHASSIS ARCA RAIL - $100
• MDT MDT VERTICAL GRIP ELITE $100
• MDT BUTTSTOCK WHELLS $20
• JAMER BAG RIDER $50
• TOTAL NEW = $800

Will accept Ruger 10/22 footprint (also KIDD and Volquartsen). Have all original boxes and can provide additional photos

$450 PayPal or Venmo shipped

Top to bottom, left to right:

UTG 3-9X32 AO MIL-DOT $100 $80
Vortex Crossfire II Scout 2-7X32 Duplex Sold
Vortex Crossfire II 1-4X24 Duplex $130 $100
Vortex Spitfire 1X Prism DRT (MOA) $100 $80 Sold
Bushnell Pistol Dot $80 $70
Konus Pistol Dot 4MOA $60 $50
Swampfox Kingslayer Pistol Dot 3MOA Sold
Vortex Venom 1-6 AR-BDC3 MOA Reticle $200 $180 Sold


All prices are shipped.
PP, Venmo, or USPS MO.

Evening gents. Im setting up a rifle, picked up a ZCO527 for it and I'm struggling to get proper eye relief. It seems like a lot of guys have the opposite problem from me, I'm 6'4", long neck, long arms, but with the way I interface with the gun I can't get the scope back far enough. I'm setting the gun up for shooting barricade 90% of the time, and I normally use around 14.5" LOP.

Im considering buying a pic rail with an overhang so I could scoot the mount back further. Leupold "mark AR", Scalarworks "fuse/01" and PRI are what I've looked at as possible solutions. I'm a little bit hesitant though because this adds complexity, more machined parts, tolerance stacking, things to come loose smd shift etc. Does anyone have experience using a riser like this on a PRS type gun? Any problems with it? I imagine it'd be fine but it gives me the ick as the kids say. I know too many CNC operators...

Another option is to have a scope base custom made that gives me a few more pic rail slots to the rear but that'll be a PITA.

I've never had this problem before so I'm a bit vexed.
If anyone has suggestions or experience using a riser on a precision gun lmk I'd like to hear your thoughts.

Hornady 6.5 Creedmoor brass .

MDT Send-It level
Asking $175 shipped

Operation Atlantic resolve?

I currently reload bulk calibers (9mm, 45aarp, .223 and .308) on my Dillon 550. I am wading into the waters of 6GT and was curious if it is worth getting a single stage press to reload that on. If so, how does the RCBS Partner Press compare to the basic Hornady Lock and Load? My grandpa has the RCBS that he said I could have, but the Hornady can be found cheap and I like the idea of the quick swap bushings so I don't have to change stuff around every time.

M110 K1 upper build(clone like)

Factory SR-25 upper (Not Cartel!)
KAC URX 3.1
HTX 16” 6.5CM barrel, Dimpled by Templar
HTX gas block
KAC flash hider(pulled off previous M110 K1)
URX panels were/are painted. These were placeholders, I never ordered a new set.

Assembled and cerakote by D Wilson.

15 rounds through the upper and barrel. (5X FGMM 10X Berger 130)

Lower not included, photo for reference

No trades.

$5500 Shipped OBO