Clearing out some ring sets I'm not using anymore. All are used in good condition.

First up, APA (American Precision Arms) 30mm aluminum rings marked .750 on the bottom. Presumably .75" is the rail to center line on these.
$125 shipped CONUS



Next up are some Bobro vertical split 30mm aluminum rings. Distance rail top to center line on these looks about .75" as well.
$100 shipped CONUS



Now we have some of the classic steel Leupold 1" rimfire mounts that fit on an Anschutz or 3/8" dovetail. These look 1" center line to the rail top meaning these must be the "high" model.
$50 shipped CONUS



Last up, steel no name 1" rimfire rings for a 3/8" dovetail. Looks like about .7" from center line to rail top. Think I did actually buy these at a gun store years ago so they aren't air-soft, but they aren't great either.
$20 shipped CONUS

2x 10rd MDT AICS .223 magazines. These have less than 20 rounds through them. They were just never the favorite mags of my .223 and they don't fit my 350 Legend as my other .223 mags do. As such, I'm selling them in near new condition. $65 shipped CONUS



MDT Ckye-POD attachment head mount - RRS BTC 106725 - BLK. This in new in unopened box. I don't remember how I ended up with an extra one of these, but I it was in the back of my gear bin. This is basically an upgraded clamp that allows you to upgrade older Ckye-pods to the new attachment head that fits on both ARCA and picatinny rails. I'll do half retail price for such an oddball piece, $60 shipped CONUS.

Pure SKLTN stainless model 20MOA pinned rail. 24” proof carbon barrel in 6.5 Creedmoor muzzle threaded 5/8x24 barrel has 300 rounds on it. Shoots in the .3-.4 with 147 eldm sometimes smaller.
Looking for $1900 shipped to your ffl.

Would consider trade for an impact or lone peak action.

Trigger not included

Badger Ordnance USMC 34mm rings,1" height. I mounted a scope with it, but then hardly used the rifle, so they are like new.

$120 shipped.

Brand new. Turns out both my DT SRS covert and full size are A1 and will not allow this to mount. Looking for $250.

Sold

Stiller Tac 30 AW action with a 26” hawk hill comp contour barrel. Has around 800-900 rounds on it. Asking $1600 obo. Shipped to your ffl. Can do ffl to ffl but you will have to pay any associated fees.

I bought this here a couple months ago and have decided not to use it for now

Matrix pro 2 - SA R700 ambidextrous in gunmetal gray
Speed nut for LOP adjustment
MEVG
3 NV caps
I also have all of the original parts for the standard stock setup as well as the thumbs thumbshelves and what not
It's used, but is perfectly functional
The spigot is included, but not in the pic

1100 shipped via venmo, zelle or PPFF

22 GT 24” Cut by Strait jacket armory for a impact 300 rounds with hellfire brake $650 shipped

200 pieces of alpha 22 GT BRASS 75 loaded $190 shipped

Widden GT bushing sizer die and Forster bench rest seater die $170 shipped

85.5 Berger’s QTY 900 $360 shipped

Package
Barrel, brass, dies $980 shipped

Barrel, brass, dies, bullets $1330 shipped

I won’t sell the bullets until everything listed above them is sold.

Venmo is preferred but I can do PayPal F&F I don’t want to pay the government income tax on the money I have already been taxed on. So no G&S when you sent the money or I will send your money back. I will do phone calls or FaceTime I have a lot of reviews here. I can typically ship same or next day of purchase.

Looking to sell a couple extra AR triggers. Prices are before shipping.

1) NEW Trigger tech Diamond Single Stage AR15 adjustable trigger. Was removed from packaging and played with. Brand new. $199.99

2) NEW Trigger Tech AR9 single stage curved AR15 trigger. Was removed from packaging and played with. $199.99


Will trade for Geisselle SSA-E curved triggers. Plus you cover my shipping

Lightly used.
$105 shipped

PayPal f&f or Venmo

This is a catch and release. About 20 rounds on it. Only went to the range once. Decided i prefer a traditional stock much more.

XLR Element 4.0 Aluminum with c6 butt stock.

Remington 700 SA

$800

$775 shipped


Venmo or Cashapp

Paypal friends and family only

Like new, only used at one match. Comes with box

$old OBO Shipped

I am trying to look at another can on primarily for use on a 300 blackout with mixed use of subs and supers but with much better sub performance than my current oss 762 qd and crux cans. I am interested in the CAT JL and ODB but can’t find much realistic comparison if the larger quieter cans such as the JL, Tbac manus, Ptr vent really make a large difference on a semi auto due to port pop and action noise. Anyone have experience directly comparing them?

Largest concerns are low flash and very quiet with subs. Already have a handful of k type cans but the nothing that works great on subsonic rounds (other than 22lr and 9mm).

$90 shipped

Does anyone recognize these rings around these cases, just below the mouth? If so, what would cause something like this? The groove isn't a uniform distance from the edge of the case and there is enough difference there that I can feel it with my fingernail.

I have up for sale 2 Cortina precision expander mandrell dies one for 6brand one for 308 Win. The br die will work with 6br,bra,brx,and dasher the 308Win will work with 308Win , creedmore , xc . For the 6 mm die I also have a Cortina mandrells one ,241 and one ,2415 . Looking for $50,00 eachand $25.00 each for expander mandrell .Will take pp/ff , USPS money order . If you take all I’ll pay shipping if not $10.00 for shipping.
Thank You for looking. Terry

G3 Razor 4-24x44? at a NRL Event. Enjoy the teaser. That is all.

disclaimer: I know nothing except I'm saving my money.

Magnetospeed V3 for sale in excellent condition comes with everything in the original hard case

150 shipped

Here’s what I have. I will part out if desired. Upper has maybe 10 rounds on it. Just enough to adjust the gas block. I just don’t shoot LR308/ar10 platform
Aero M5 upper receiver $130
Rubber City Armory HP Bolt BCG $300
Sgt of Arms 17.5” ARCA rail handguard $240
SLR Sentry 8 detect adj. gas block $150
Insite Arms Heathen brake $160
CLE chambered 20” Krieger barrel .875” @ gas block . Cerakoted black by CLE. $700
$1700 invested
Or to arrange for local pick ip
>>>>Bonus . I will include a wheeler AR10/LR308 bore guide. It was used once to clean this upper after adjusting the gas block.
Thanks for looking
Cross listed

Of course this is a somewhat rhetorical question, but there is an ounce of query in there. You see, I just picked up a new March FX 4.5-28x52 on sale from Eurooptic. If you have ever looked into this brand you will note that it is generally very expensive, and the premium is interesting considering most Japanese scopes, OEM, or otherwise are in general more affordable when compared to a ZCO, Tangent, or SnB. However from all I can tell this model is absolutely on par with any one of those brands, and it's understandable now why it commands a premium. Now, I have not had time yet to take it out to distance and see how it tracks but I can tell you that from every thing I can see it compares very well against a ZCO or an SNB, and even my old TT and Premier. This honestly feels like the most refined optic I have ever owned, and I have owned about every top tier brand besides a ZCO, now I feel I don't need a ZCO frankly. With the 4.5-28x52 the glass is stunning in clarity, pop, color, and resolution. The wide angle eyepiece offers a very wide field of view, more so than any of my other tactical scopes. Optically it's very impressive considering it's compact size, the glass is very reminiscent of a PM2 in color temperature. At the upper range the eyebox seems a little tight but otherwise 25x and lower it's fine. The turrets are very audible and positive, the zero stop is an eloquent design and easy to set. All of the controls are smooth and offer excellent feedback and lockup. The engravings even look premium and perfect. Though I will not take it out to distance until next week the reticle is excellent, it's not to thick, nor to thin at any mag, it's laser sharp, and all the markings are exactly where they should be, as a matter of fact the reticle was designed by our resident Dark Lord Of Optics, and i'll say great job Mr. Koshkin! Though March has been around for a while it's nice to see them coming out with something so premium. I think the other top tier European brands need a good Japanese competitor. I truly appreciate Japanese excellence, refinement, and attention to detail and the March FX 4.5-28x52 is a great example of Japanese perfectionism, in fact I am so impressed I may have to pick up another March should the need arise.

After I take this the distance I will report further on the scopes performance.

If you want a further review and way more detail on this optic I highly recommend Glassaholics extensive review and comparo against the Canada's main battleship the Tangent Theta.

Rifle Scopes - March 4.5-28x52 High Master Review and Comparison to Tangent Theta 5-25x56

March 4.5-28x52 High Master Review and Comparison to Tangent Theta 5-25x56 If I told you that you could have the benefits of a 4-20 and a 5-25 scope all in one scope would you be interested? Of course, companies like Hensoldt, Schmidt and March have been trying to solve this issue with...

www.snipershide.com

PWS Mk116 Mod 2 for sale. Used, in excellent working condition, approx. 800rd fired. Upgraded with BCM furniture and charging handle.

$1700.00

Posting for a buddy, text (214) 478-3941 if interested.

Thought I was going to put a RUM together, but need to free up some funds for something else.
26” Crown Ridge carbon fiber, 10 twist, 5R, with a remage nut, muzzle threaded 5/8-24.
Bought it lightly used, has no more than 300 rounds on it. Not sure who did the barrel work.

$500 shipped. PM me first, I will not PM you. Anyone else is a scammer.

PGD ARCH GEN 2 in multicam for sale
Has gen 3 rails, DBM gear cover (handmade custom in Poland for these helmets) in multicam, alloy Wilcox shroud, BOA, 4D pads.

Great condition, no issues.
$550 shipped

Hello everybody just want peoples opinion on my issue. So was cleaning my tikka after shooting 40 rounds for the first time. I used wipe out and soaked and also g96 and also clp 2000 foam. Many many patches and also bronze bore brush with bronze core. It made the whole barrel spotless and immaculate. However i noticed there is a circle of crud where bullets comes out the neck of case the carbon ring I believe see pic. I tried scrubbing so much other than spinning the brush on a drill which I do for my cheap rimfire. What chemicals are there that is strong enough to remove this ring.