- Vortex Razor HD LHT
4.5-22X50 FFP XLR-2 (MRAD) Reticle
- Zeiss Precision Rings w anti-cant level Med Height
- Nice Tenebraex Scope Caps SOLD

Scope elevation cap has light gouging from me trying to use a knife to spin it off. Otherwise excellent condition. Prefer selling these as a set $1000

- American Rifle Company Xylo Short Action Chassis. Extras include Medium and Large grips, extended arca rail, and barrel shroud $950 $900

Photos: Login to view embedded media
Desired Trade Items: Accuracy International AT-X Chassis, Nightforce ATACR 1-8, KAC M4 RAS rail, possibly some other short action R700-compatible chassis,

New never used
$350 shipped

Once fired Lapua 6.5 PRC fired from my GAP rifle.

$125 shipped OBO

Warne MSR LR-SKEL 20MOA Scope Mount 30mm - New.

$SOLD shipped lower 48.

Prefer Zelle or Cash App for Payment.

Brand new Warne Skyline MSR 7825-20MOA Scope Mount 34mm. Ideal Height

$180 shipped to lower 48.

Prefer Zelle or Cash App for payment.

Looking for a Noveske 14.5 DDF 6ARC upper.

I’m going to regret selling this but here goes nothing. Scar 16 fully loaded and ready to roll. This had a custom copper/patina cerakote job done very recently by Titan here in Michigan. He replaced all the screws and hardware with brand new components so this rifle is CRISP. Everything about this gun is smooooooth.

Comes with 3 mags painted to match. Suppressor and ASR brake aren’t included. The eotech only had the cover painted so the base is still FDE and never saw the oven. Comes with the KDG rail installed and a Gieselle trigger.

$3,500 shipped or will trade toward a MRAD, AXMC, mil/mil FFP optics, stacatto XC, or Wilson project one.

Of course none of the other shtuff on the wall not mentioned above is not included.

I prefer to sell this locally so I don’t have to bother figuring out how the heck to ship this beast. If no one local to Michigan or northern IN wants it then I’ll look into shipping arrangements and cost.

This is turn key and ready to go. Fully setup with the Mr Bullet Feeder and extra trays and stuff not listed, this setup would run you north of $2500 to piece together. Looking for $2000 locally and I’ll throw in some 5.56 components like powder and boolits.

I’m open to trades on it for mil/mil FFP glass or a big boomer in 300 NM, 28 Nosler, or 7 PRC

I’ve probably loaded 2000-3000 on it. I bought it brand new.

Ignore the junk and the 9mm ammo. Things got a little chaotic redoing this room.

Looking for an amp annealer certificate.

There is an almost limitless pool to choose from . If I had to chose I'd go with Charlton Heston in Omega Man .
What's your pic ?

Several bundles of SR-25 twenty round Magazines.

Bundle of 3 for $375

• White Follower
• KAC Stamped
• Lightly Used or like new
• Includes 3 Magpul Pull Handles
• I have two of these bundles, 6 total

Semi Vintage Pair of 2 for $300

• Black Follower
• Early KAC Helmet & Shield Logo
• Lightly Used

SR-25 Charging Handle – Single Latch, barely used if at all. $95


Can take Venmo, Zelle, Check or MO. No sales to banned states.

I've got a twice used Vector X Rangefinder Binos in 10x42 with the dual reticle. Comes with all original packaging. Comes with the area 419 Arca mount.
$2050 Shipped CONUS
PRICED TO SELL...
NO TRADES>>>>>>>>>>>>>

I tried the Breakthrough Suppressor cleaner kit on my Nomad-30. I'm pretty damn impressed. Soaked it for 24hrs and it got pretty clean, soaked it for another 20hrs and it got even cleaner. Required minimal cleaning with a brass brush. Weighed 17 grams less after cleaning.

Before...







After...

As title says I'm looking for 2 hrd dasher aw mag kits.

I have a Vortex Razor that I just have decided I don't need. It is missing the windage cap but I have one on the way from Vortex so likely will be here before sold. I do not have the box but will make sure it is well packaged to ship. Price is $1400 shipped to lower 48.

Henderson Precision Trimmer Gen 3. Purchased from Henderson Precision and used for maybe a total of an hour. Only has about 150 pieces of brass. The package includes Gen 3 trimmer, 6mm cutting head (installed), CT#1 collet (installed), 7 bolt stops of various lengths, and the brass bin & shaving containment (no base plate). Asking $750 shipped. PayPal F&F. Let me know if you have any questions

Stockys vertical grip tikka stock, carbon fiber, weighs roughly 26 ounces. 2 Spartan gunsmith adapters are installed. The rear one is a bit off center, works fine for tripod use however.

Spartan mountain ascent with Gen 1 davros pro head. Great lightweight back country tripod, not quite enough for my heavy coyote rig however.

Spartan pro hunt tac bipod (long leg) with FHF gear bino harness holster.

I have a few regular mounts and an mlok mount I can throw in as well for the bipod.

Prefer to sell as a bundle. $1250 shipped for everything

Stock=$460 shipped
Bipod and holster=$300 shipped
Tripod and head=$600 shipped

Will trade for a hnt26 (tikka inlet), xlr mag 4.0 setup for tikka.

Partial trades for gunwerks bipod, gunwerks tripod with ball head, alterra tikka stock, manners tikka stock, other tikka lightweight CF stocks. Will also consider 18-20” 6.5 prc tikka Prefits (lightweight or CF only), 6.5 saum.

I will also consider selling the entire rifle setup if anyone is interested (minus the optic and suppressor). Details: started as a tikka t3 veil wideland. Barrel cut by class 3 machine to 18” (roughly 2700 fps with 140s). Barrel and bolt are fluted. Has OMR bolt shroud, Lumley CF carbon fiber knob, JA outdoors bottom metal color matched. Will come with both the factory tikka mag and an HCA mag that had a little dremel work done to it. UM 30mm rings. Stockys stock with the Spartan adapters. UM recoil lug. Not bedded. Very accurate and light rifle. As pictured it is 8 pounds 10 ounces on my scale (with the optic and suppressor mounted). 1750 for the rifle with stock.

Willing to trade the entire setup for other lightweight hunting rifles. Seekins ph3/2. 6mm creedmoor, 6.5 prc, 25 creedmoor, ext. 19-21” barrels depending on caliber.

Looking at a new 4-14 scope debating on the mk4 hd in 4.5-18 or the Nightforce SHV 4-14 F1 model.

Used mostly for target shooting/hunting oldish clear cuts/regen cuts.

just saw elsewhere that Trump just embargoed China 100%-meds,car parts,everything. true from other sources? if so-
1) need to get US citizens out. they will be in danger. be like China in 30s.
2) a lot of corrupt rinos and dims will scream bloody murder
3) will affect very many firms here,some smallish,some enormous
4) Xi likely to try Taiwan to start some distraction to stay in power?
5) some judge will make some "injunction" BS
6) affect on Russia/Ukraine?
7) some secret thing with Modi to distract china from India?/Pakistan?
8) will drastically curtail the income of most congressional scum
expelling ALL Chinese nationals would be a terrific add on. not likely possible but siccing the FBI on them would be interesting. universities would cry about losing faculty,students and closing departments-fuck them.
if we expelled all illegals,all Chinese nationals,90% of Muslims might get our pop down from 350 mil to 250-good thing. reduce crime 20% at least. of course the in country Chinese army would have to be dealt with.

Looking for a Schmidt & Bender 1-8x24 PM II ShortDot Dual CC MDR-T6

Iray Rico Hybrid 75 like new with upgraded rangefinder and bobro mount. $5800 shipped

I was told that there is a variant of the 13 Mod 0 that had a detachable magazine. It was my understanding that they all had the standard floor plates. Is there any validity to this?

Is it me, or is there a trend away from target distances beyond 300 yards?
Is this due to the seemingly limited supply of consistent ammo?
Thoughts?

Had this for a thermal setup but prefer the short LOP of the XLR.
Yes the fence looks like shit. Maybe I'll use some of the money to refinish it.

Short action Tikka inlet
Integrated arca
Fixed stock

$1050 shipped to lower 48.

Never fired Colt M1A1 SOPMOD Block 2 Upper professionally built. Looking to sell to finance another build. Centurion sand cutter/dual ejector BCG available extra but not clone correct for this build. Also have a Surefire suppressor QD hub mount available. Looking to get $1200 shipped OBO. Zelle or postal money order. Thanks.

Colt “C” marked Cerro M4 reciever.
Colt SOCOM heavy 14.5 barrel cage code/MP barrel. Pinned Daniel Defense MK12/18 gas block.
Pinned and welded Surefire flash hider.
KAC front and rear flip BUIS.
PRI gas buster charging handle anodized FDE.
Daniel Defense M4A1 RIS II cage code handguard in FDE.
CQD front picatinny sling loop.
Geissele gas tube and roll pin

May be inclined to offer the parts separately if enough interest.