Filter

Reloading Equipment WTS: 187 pieces of Hornady 6ARC Brass

187 pieces of Hornady, 2x fired, in great shape, brass is in very good shape, was deprimed and tumbled, needs to be prepped before loading it up. 110 bucks for the lot shipped to your door. NOTE: Tray not included.

Acceptable payment methods are PPFF, Venmo & CashApp.

Have questions? Hit me up via DM.

Attachments

  • IMG_9142.jpeg
    IMG_9142.jpeg
    386.8 KB · Views: 40
  • IMG_9140.jpeg
    IMG_9140.jpeg
    404.3 KB · Views: 39
  • IMG_9139.jpeg
    IMG_9139.jpeg
    3.1 MB · Views: 35
  • IMG_9138.jpeg
    IMG_9138.jpeg
    2.5 MB · Views: 39
  • Like
Reactions: BoldCorrections

Powder Dispensing Accuracy & Match Dies

Hello,

I am new to reloading and am starting with the basics, but I eventually want to start loading for my 7mm PRC.

I see a lot of people using automatic dispensers that claim to be accurate to 0.1gr for general reloading, but I was curious if those are accurate enough to meet/exceed factory match ammo, and what most people use for handloading for “ELR”. I intend to use h1000, but I am open to recommendations.

I was also looking for die recommendations, I see hornady has some match dies, but wondered what else people are using.

Thanks for the help!

SOLD BNIB KAC SR-15 Lower PN 25780

Brand new in box (haven't even opened it yet) SR-15 Lower. I got a couple of these and dont need them.

$XXX Shipped

Would do a trade for the following and can add cash either way:

Impact 737 or Lone Peak Fuzion Titanium RH Short action
ATACR 1-8 MRAD
ATACR 4-16x42 MRAD
S&B 4-16x42 MRAD
Vortex Razor Gen 3 1-10MRAD
Vortex Razor Gen 3 636 MRAD
ZCO 420 or 527 10 mil MPCT1x
  • Like
Reactions: 1911hombre

Optics WTS - NF ATACR 7-35x56 Mil-XT F1

Brand new, Unused and unmounted. Box opened just for photos. Model C613.

$2900 shipped via PayPal GS. That price includes the fees.

Can provide personalized photos or FaceTime.

You get this great scope, I get a happy marriage back.

Attachments

  • IMG_7737.jpeg
    IMG_7737.jpeg
    1.7 MB · Views: 68
  • IMG_7736.jpeg
    IMG_7736.jpeg
    2.2 MB · Views: 64
  • IMG_7735.jpeg
    IMG_7735.jpeg
    2.8 MB · Views: 49
  • IMG_7734.jpeg
    IMG_7734.jpeg
    3 MB · Views: 63

SOLD WTS/WTT Manners EH1A 700LA

I have for sale or trade a Manners carbon EH1 adjustable for R700 long actions, proof sendero barrel channel and M5 bottom metal. Left side QD sockets front and rear, pillars installed, 4in pic rail and Limbsaver pad. Bought this for a project that isn't going to happen so it's up for sale. It's been skim bed and worked very little at recoil lug area. Weighs right at 3lbs with pic rail! Wish I had something to use this on...hate to sell it but need funds for something else.
Has a small scratch on right of buttstock that is barely into finish...See last pic

Asking $750 shipped OBO or trade for a similar short action stock. I also have a Mesa/Pure Precision stock for Defiance XM for sale/trade...see listing

DM for questions, offers, etc
I will not DM you first

Thanks for looking and dont forget to check out my other listings!
Chris

Attachments

  • 20250325_175919.jpg
    20250325_175919.jpg
    1.7 MB · Views: 114
  • 20250325_180112.jpg
    20250325_180112.jpg
    1.6 MB · Views: 113
  • 20250325_180119.jpg
    20250325_180119.jpg
    1.5 MB · Views: 125
  • 20250325_175554.jpg
    20250325_175554.jpg
    3.7 MB · Views: 129
  • 20250325_175653.jpg
    20250325_175653.jpg
    3.4 MB · Views: 128
  • 20250325_180407.jpg
    20250325_180407.jpg
    1.7 MB · Views: 122
  • Like
Reactions: chase723

6.5 prc barrel lenght

Currently have a 26 inch running Berger 156s avg 3015-3025. Wanting to cut the barrel down a bit for a can. Unsure on what can but at minimum it’ll be a standard length can but more than likely an L can. Considering Abel Co, OCL, and Diligent. I hunt in SC so weight is not a big deal, either hunt from an elevated blind or from the ground using my Fatboy tripod. Being on a bolt gun max suppression is the priority. Would love to hear from fellow hide members on suppressed 6.5 pecs hunting whitetail or possibly hogs. Thanks

Accessories 30mm mount, Reptilla AUS

30mm tube size
0 moa incline
1.5” height over bore
Like new condition.

Swapped things around and selling some lightly used mounts.

3. Reptilla AUS, FDE, was mounted on a NF nx8 and would not fit the rmr ring cap on the front. Otherwise unused. $235 shipped

1. ADM Recon, Vortex branded, solid rings standard levers. Pretty rare to see these anymore. $125 shipped
2. ADM Recon, standard rings, standard levers, one small sharpie index mark on the bottom edge that will clean off. $145 shipped



Discreet PP, venmo accepted

Trades:
Reptilla AUS black 30mm 1.70" height.

Attachments

  • IMG_2359.jpeg
    IMG_2359.jpeg
    106.5 KB · Views: 102
  • IMG_2360.jpeg
    IMG_2360.jpeg
    97.1 KB · Views: 102
  • IMG_2362.jpeg
    IMG_2362.jpeg
    70.1 KB · Views: 102

.223/.556 ammo recommendation

Hey guys, I have an AR-15 I'm setting up that will be dedicated to a mix of fun long range shooting and coyote hunting. I also have a scope that will be set up with custom turrets. So I kind of need to settle in on a desired round. It sounds like the vmax are preferred for coyote, but they're awful light. I'm just curious as I'm new to all this if there would be a better round that will do double duty? Maybe something that will be good and accurate at longer range and adequate for coyote. Thanks for the help guys.

Firearms Unfired LWRC M6 IC Di 16” 5.56 Multicam cerkoted

I am down sizing some of my ARs; have an unfired LWRC Di with the ambi lower and spiral fluted 16” barrel. It was one of the limited run factory Multicam cerakoted rifles (not black multicam but standard). It will came as factory standard not with items mounted (scope, light etc.) and with the black buttock shown not the Bcm. The trigger will be the standard not the swapped 2-stage as well as standard Lwrc charging handle not the Geiselle. I am looking for $1700 shipped from my Ffl to yours. I accept PayPal ff.

Attachments

  • IMG_2734.jpeg
    IMG_2734.jpeg
    1.4 MB · Views: 281
  • IMG_2732.jpeg
    IMG_2732.jpeg
    1.2 MB · Views: 230
  • IMG_2735.jpeg
    4.8 MB · Views: 18
  • IMG_2736.jpeg
    IMG_2736.jpeg
    2 MB · Views: 277
  • IMG_2737.jpeg
    6.1 MB · Views: 13
  • IMG_2733.jpeg
    IMG_2733.jpeg
    1 MB · Views: 280

Starting a small casting company - need feedback

My good friend and I are going to start a casting company in the next 3 months. Nothing too big. He has been wanting a side job as he is semi retired and I realized I have all the equipment to run a small casting shop. I can get custom molds and dies easily so the sky is the limit.

I'm looking for feedback from you guys regarding what bullet sizes you would be most interested in. I can do odd stuff like gas checked bullets for 9.3x62, or gas checked .310 bullets for a Finnish Mosin. I can do long range bullets for the BPCR stuff.

We will obviously support things like 45-70, 38-55, 10mm, 44 mag (.430 to .432), 38, and the .510 stuff.

If any of you guys want cast bullets for a .510 Whisper I can get the dies for that.

We don't have the massive industrial machines or volume to compete with HSM or guys like that, so we plan on meeting market demand more in the niche stuff.

Obviously once we actually start the business I'll get a supporter account. This is not a for sale post. I am just gauging interest to know what dies to order beyond what I already have.

I may have the opportunity next year to set up a similar company in Europe due to some unique circumstances. I am checking into the regulations regarding that. Maybe you EU guys will then get to have more options that are actually cost effective, too.

Let me know below what sizes you want and I'll see what we can do.


Thanks.

Reloading Equipment AutoTrickler Parts

I have designed, printed and been using these parts in my reloading room with great success so decided to offer them for sale here.
Photos and description of each part is shown below with preferred payment via PayPal and will offer multiple item discounts as well.
IMG_4866.jpg


Pan cover for A&D scale domed to push stray kernels into the gutter, one size for the stock glass cup and another for the larger cups: $35.00 shipped
IMG_4867.jpg
Powder catch pan for AT4 and hangs off the back of the trickler so you don't need 3 hands to switch out the powder: $20.00 shipped
IMG_4862.jpg
O-ring sealed lid for AT4 powder hopper to make an attempt and keeping powder from drying out: $20.00 shipped
IMG_4863.jpg
  • Like
Reactions: buckleboy

Reloading Equipment WTS: 175x Prime 6.5 CM Brass

Prime (the good Prime, back in 2021): 175 pieces, 4x fired, in great shape, brass looks to be in very good shape, needs to be prepped before loading it up. 80 bucks for the lot shipped to your door. NOTE: Tray not included.

Acceptable payment methods are PPFF, Venmo & CashApp.

Have questions? Hit me up via DM.

Attachments

  • IMG_9136.jpeg
    IMG_9136.jpeg
    608.6 KB · Views: 74
  • IMG_9135.jpeg
    IMG_9135.jpeg
    519 KB · Views: 76
  • IMG_9132.jpeg
    IMG_9132.jpeg
    2.3 MB · Views: 71
  • IMG_9131.jpeg
    IMG_9131.jpeg
    2.8 MB · Views: 46