Looking for some info before I order from. Anyone use them?

Steer clear of this site.


Glowies gonna glow.

Very clean like new Bergara Premier Ridgeback rifle chambered in 300 PRC. 26” heavy barrel threaded 5/8x24T.

250 rounds down the barrel.




$SOLD Shipped/Insured

Like new, $250 shipped

I switched over to Bergers for the time being and never got the chance to load any of these. One lot # is 1000 of them and then there are (3) 100 packs that are another lot #. I would prefer to keep them together if possible but could separate if shipping is covered.

$800 shipped (puts them right around $0.60 each)

Would trade for the following:
- AXMC Lapua bolt
- 250gr 30 cal Atips
- 245gr 30 cal Berger EOL or Hybrids
- 230gr 30 cal SMKs
- Berger 6mm 105 or 109gr Hybrids

Thought some of you might be interested in this

Available for pre order now in limited quantities
First shipment Early May 2025
Second shipment Late May 2025

Some quick specs:
- 5 Position splay adjustment, with a single button
- Up to 180 degrees of cant adjustment, tension lever included
- No pan, for lightness and rigidity
- Inverted 3 section with (2) ¼ turn leg locks, for fast deployment on the clock
- ARMS17 attachment head, with ARCA/Pic dual clamp included

Weight: 29oz, 1lb 13oz
Leg Locks: ¼ turn
Folded Length: 17”
Min Height: 9.25”
Max Height: 32”
Feet attachment: 3/8”-16 threaded
- compatible with your favorite tripod feet or spikes, no adapters needed


Login to view embedded media

Title pretty much says it all. I know WTB ads are cesspools for scammers so I will only be dealing with verified members with feedback.

Looking for a right hand SFP Lapua face bolt body or complete bolt in either large or small firing pin.

8” CMMG 9 twist RDB barrel and bolt (no CH)
SI port door
7” mlok handguard
No muzzle device
Aero Precision ultralight 30mm scope mount
Vortex Strike Eagle 1-8x24 (Gen 1, AR-BDC2 MOA)
Threaded 1/2-28

Accurate and reliable I just don’t use it. Probably has less than 200 rounds through it. All NFA rules apply. All items were purchased new by me.

it takes these Magazine, 5.7 AR Conversion, Gen II, 32rd | CMMG - AR 15 and AR 10 Builds and Parts

One is included with the upper. Fits any standard AR-15 lower. Works with standard buffer/spring and milspec/aftermarket triggers (I was using a Triggertech single stage). Maintains last round hold open feature.

I also have dies, brass (purchased as once fired range pickups), bullets (30gr Varmint Grenades), and ammo available as well. I will get those up later today. Surprisingly not as difficult to load for as one might think. I was getting about 2700 Ft/s with the 30’s.

$600 shipped (upper w/ bolt, mag, scope mount and scope). PPFF preferred.

Looking to sell some 1x fired brass. See below:

.300 Norma Mag Lapua brass from factory match berger ammo. 128 pieces - *SOLD*

6.5CM:
Hornady Match Brass 410 pieces
Winchester Brass 175 pieces
Norma Brass 80 pieces
665 total pieces for *SOLD* shipped.

Also have 130x Federal .308 if anyone wants that thrown into the box along with purchase.

With takedown lever and skeletonized flat trigger. Must ship to FFL.

$225 shipped. PPFF preferred but will also accept check or money order (will hold until clear and/or money in hand). Purchased new by me.

Never really saw much use. Maybe has some slight ring marks, but they are hard to see. The Glass is excellent. No box but comes with sunshade and Vortex Defender caps. Purchased new by me.

$230 Shipped. PPFF preferred.

This is a set of like new Zeiss Victory SF 8x32 binos - phenomenal glass with wide FOV. If you are looking for something more compact/portable than the traditional 10x42's then the Victory SF represent the best glass from Zeiss to date, stunning image. 21.2oz and 465.7' FOV at 1000 yards!

$2500 binos for $1395 to the first "I'll take it". PP FF, Venmo or MO, even check (but wait for clearance)

These were used for testing so have seen little use, they are like new - perfect glass and no major scratches or blems I can see. Selling to fund other projects, might consider trade for other optics or LMT MRP-L stripped uppers, or?

I am selling a Remington 700 LA (Std bolt face), complete with bolt, bolt release, trigger, recoil lug, hardware, and bottom metal. This action was worked on by Score High Gunsmithing in Albuquerque, NM; however, I didn't have it done, so I can't say exactly what they did. The face of the receiver definitely looks like it has been trued, and the lugs have been lapped. They also pinned the recoil lug. Trigger breaks right at 2lbs.

Must ship to FFL from an individual. $550 shipped, PPFF preferred. I will also accept personal check or MO, but will hold item until clear and/or money in hand.

I switched things around a little bit so this one is up for grabs in a slightly different configuration than before. The KRG is in good condition, I just need to get the dirt off of it that is in the picture. I will get it cleaned up prior to shipping.

Tuebor Raider Action
Bartlein MTU 24" 1:7.5 twist, threaded 5/8x24, cerakoted black
APA Fat Bastard Break Gen 2
TT Diamond
Round Count 330
KRG Gen 4 (aluminum) W3 Folder w/ front spigot pic rail
Weight ~15lbs

Optics, rings, and bipod are not included but can be added for extra.

I have a ton of ammo that can be sold to the buyer of the rifle at a discount if desired.

$2,500 shipped. $1,000 for the chassis and $1,600 for the barreled action if split.
Only trades would be mil/mil FFP optics (can add cash if needed).

Price: $1100 firm
Shipping: UPS to lower 48, buyer pays
Location: Metro Atlanta for local pickup

SEND ME A PM TO COMMUNICATE! I do not use the comments section on listings to answer questions or engage.

MPA Matrix Pro Chassis was purchased in 2023 and used in about 20 matches. Freshly applied Tuff Armor Black Cerakote on 1/9/2025 by a certified applicator and it looks brand new. It was bedded for an Impact 737R action, but the bedding material has been removed so you can bed whatever action you desire. Details of the chassis are as follows:

• Adjustable bag rider
• Adjustable length of pull
• Adjustable padded cheek riser
• MPA vertical 3 grip installed
• Finger block
• Thumb rest
• 2 round holder
• GrayOps Matrix Pro external weights (aluminum)
• Front bridge with Picatinny rail
• Full length magwell plate
• Adjustable magazine slide
• Matrix Pro RAT RAIL

It will come with the accessories shown in the plastic container, which includes an MPA data card, two thumb rest variants, two finger block variants, a stubby bag gripper for the magwell, and MPA vertical 2 grip.

SPF New barrel shipped. Cost me with tax and shipping These are shooting sub 1/2” for people. SPF







Brand new Hawkins mount. $250
Or trade similar quality brand in 1.5”

Been working on reloads for a 6.5CM.
First ill say I am still new with a lot of this and this is a hunting rifle. Not a precision rifle or a really super high end rifle either. But one that I do enjoy to shoot and hunt with.

Finally starting to get somewhere with help from one of the members here. Has been a huge help.
But I also have another question.
When you head to the range and start shooting. Do you start out cold. and record those groups.
Or do you run some sighters or foulers through the gun to get some heat in it before shooting groups for recording data?

The reason I ask is the 3 charge groups I shot last night all were somewhat consistant.
But the first group the first shot I made went low and opened the group up.
taking that one shot out the group and mean radius of the group would be much much smaller.
So just got me thinking if I should run this group again to see what it does if the rifle has some heat in it first.
Here is my original target.

Here is the same target with the 1st target shot dropped. Which was the first shot made with the rifle cold.

Right now just trying to get a charge weight found so I can start working on seating depth tests to see if I can get a smaller group.

MDT FOREND TIP WEIGHT - ACC PREMIER GEN2

NIB…..SOLD

How much stuff did y'all drag to your first match on the road? Just wondering if I need a bigger truck.

Selling my used Leupold rangefinder

This thing works pretty dang good. Only reason is I got new sig 10ks


These are seriously underrated
The laser on this seems to be smaller than most as for a handheld it does a great job picking up targets at matches with ease . Works great zero problems . Spend 90% of its life in my match bag just incase

$210 shipped paypal F&F

Hiding in a deep holler under a natural limestone outcrop with food and water .

No that part is a joke - he was in Woodbridge VA just south of DC. Had no reason to hide until now

Super stoked to be here…

Brand new in the box, includes all the stuff that comes in there, plus the Arken throw lever I added. Scope, sunshade, bikini covers, stickers, cleaning cloth, battery, Arken throw lever. Sorry the sunshade's not in the pics but it IS included, and brand new, just like everything else. Reticle is the VPR (Christmas tree/precision one, not the hunter style), in MILs.

Second gen with the Japanese glass. I still have one of these on a gun but I'm spring cleaning over here. This is a great scope for the dough.

SOLD

Sig Sauer Tango-MSR 1-8 LPVO with BDC8 reticle, SFP. Horseshoe is illuminated and bright AF, works really well as a QCB red dot with lots of magnification. Huge eyebox and little distortion, way better than the 1-6 Tango. Just went in a different direction with the project.

Scope was mounted and sat on a rifle for one range trip, maybe 20 rounds. Basically brand new. Comes with scope, mount, flip covers, paperwork, battery, cleaning cloth, operator-grade Sig Sauer sticker, and original box. Coyote brown makes it more accurate. Not really, but you'd think it would do something to justify the $100 higher MSRP, lol.

$380 $300 shipped, DM me if you are interested in buying, PayPal FF or Venmo preferred. I pack things well and ship them quickly. Thanks!

I’m looking for a new or lightly used Atlas Erebus, figured I’d see if there were any here!