Like new Beretta 1301 tactical mod 2 12ga, 18.5" barrel, 7+1 capacity, Magpul SGA stock, Magpul handguard that was stippled by Singuard solutions, Aridus end cap, GG&G aluminum magazine tube cover and clamp, GG&G optic mount with swamp fox justice 2 red dot, GG&G oversized bolt handle and 7 shot card. Will also come with the original box and all of the factory parts that were removed when I installed the aftermarket parts. Everything is in like new condition other than a scuff on the red dot. I only shot about 10 rounds through the gun.

I believe they discontinued the 7+1 model due to regulations and now you can only buy the 5+1 model.

$1825 shipped

Grayboe m5 hunter bottom metal for rem 700 short actions. There is some wear on the bottom, as shown in the pics. But it functions flawlessly

$140 shipped
PayPal, Venmo or Zelle

For Sale. Nice XLR Carbon Fibre chassis system for REM 700 and clones. Only 3.3 lbs. Right hand only. Has been used well with only a few marks here and there (see photos). Action bolts included. Fibre adjustable cheek piece, M lock plates, bag rider. $750 insured and delivered.

I have a couple extra MDT polymer mags. Both are for 308/creed short action. AICS

One is 3rd and the other 5 rd

$30 shipped shipped for either.
Package deal if someone buys both together.

PayPal, Venmo or Zelle

Getting out of the sport.

Brand New, Unfired
Seekins HIT Pro M3 FDE
24” 6.5 PRC
60 degree bolt
TT Diamond
NV bridge
Padded case

$OLD

Seekins Havak Hit in .308 $1800 shipped, it has a 12” Area 419 universal arca, Area 419 hellfire match, MDT pistol grip, and a Seekins NVG bridge. (Roughly 450 rounds through the barrel)

$1650 without Hellfire
$1500 without hellfire and without NVG mount
$1450 without Hellfire, NVG Mount, and Area 419 Arca rail

OPEN TO TRADES

Short Action Customs Final Scope Level with Arca mounting base.

$220 shipped

Looking for a Stiller Tac 408 RH receiver w/Lapua or Cheytac bolt. Let me know what you have!

Any recommendations on who could replicate a Remington MSR/PSR/CSR Barrel Extension from donor extension?

Can send pics of it. Venmo or PayPal F&F only.

Bushnell dmr3 elite tactical
G4p reticle ffp
3.5x21x50

In perfect condition used for 30
Rounds

No marks on body or glass 100% clean

Sold shipped conus, original box and everything in it
No trades

[

ATTACH=full]8649760[/ATTACH]

Hey All,
I have an immediate call to action: Regarding the Scout Sniper Memorial being considered for the walk at Quantico.

We achieve our mission through research to uncover the forgotten history of Marine Scout Snipers; by positively accounting for those who served as Scout Snipers and gave their lives for their country; and by engaging with and educating all Americans about the important contributions made by Marine Scout Snipers to our nation's defense. Our most urgent goal is to erect a suitable memorial to honor the memory of U.S. Marine Scout Snipers killed in action since World War I.

We have a closing window to secure the artist before he gets pulled into a bigger project. In order to take advantage of the opportunity, we need to raise some funds before the door closes.


So, we are asking for help, help to get the word out, help to raise the money... so if you know anyone who might be interested in contributing to the cause, building the memorial, please forward this email

Contact Tim at the Heritage Foundation, [email protected]

We can do more with less at the moment but, even less is more than the Foundation has, so if you know anyone, the deeper the pockets the better...


The proposed Marine Scout Sniper War Memorial envisions a striking bronze sculpture of a two-man Scout Sniper team, blending historical eras to symbolize the passing of knowledge and sacrifice across generations of Marines. This monument, standing over 11 feet tall on a spacious granite pedestal, promises to be a poignant addition to the Semper Fidelis Memorial Park, located immediately adjacent the National Museum of the Marine Corps, to honor our war dead from all conflicts with deep symbolism and reverence.

Element Optics Nexus Gen 2 4-25x50 FFP with APR-2D MRAD Reticle. Asking $1,200 shipped.

SOLD
I’m sure someone has been waiting for one of these,
lol, I waited so long that I sold the rifle.

.382 bolt face for 223/300blk and others

$175 shipped to your door

Well this project has been in the works for close to a year and half now. Finally received a few. These are made by B&T USA to fit on the MB762ssal/re muzzle brake. The muzzle brake that was used on the m40A5 and the M40A6 series of rifles. Doesn’t include a muzzle brake. Be sure suppressors are legal in your area/state before purchasing.

Weight 25.03 oz

length 10.1″

Width 1.75

$1055 shipped to your dealer.

Please click here to view and purchase.

Please PM or email with questions.

**

**

Looking for information on 6.5 SAUM Loads using H1000 and Berger 156 grain bullets. I can not seem to find a thread with any load information. Thx.

Just dropping this here to open discussion about TKF.
9.30 min mark gets to the point fyi.
Login to view embedded media

Knee Surgery is curtailing my shooting for the next year or so, and I will not be needing these.

Nearly New VectorX 12X Binos with the Single SMR Reticle. All factory accessories, and the RRS plate. Taken to (2) .22 Precision matches that were shot under the range cover. Never taken into the field. Work great, look amazing, and the all that jazz.

Asking Sold and you cover insurance.

Feel free to PM with questions.

I've talked about our Production Shop a little, most of the stuff we do for Hide Members is the Custom Shop. We finished a run of 6.5 Creedmoor prefits for Solus/Origin barrels several months back and we just got stock release on the blanks that we had left from the contract run. We buy more blanks for a contract than what is required to make sure if something happens in production we have spares... these are those spares.

There are 15 barrels total, all are 6.5mm Creeds and they're all setup for Origin/Solus headspace. The contours are limited in the drop down menu and the pricing includes muzzle threads (5/8-24) cut to our standard Class 3A spec.

Blanks used are Vortakt Series 400 which are 416R stainless, lapped, stress relieved and button rifled. In our internal testing these seemed comparable to Criterions we've seen. They are not custom made Ospreys

We saw factory ammo hover around 3/4 MOA and hand loads were a little tighter.

The blowout pricing is a "get 'em while they're here, when they're gone they're gone" situation.

LINK

I am testing ammo with a couple of .22 rifles at short range. I want to have confidence in squirrel head shots under 50 yards. I have been using front and rear bags because I used them in a PRS course.

Somebody suggested using a sled. I hadn't even thought about it. Is there any point in using a sled for this particular goal, or is it overkill for the purpose?

I have a new, in-box Gen 2 CKYE POD in the single-pull, standard-length, RRS BTC version. Also included are the extras noted below.

-Short Action Precision quick-adjust lever (new)
-1 set of rubber feet (new)
-Additional MDT ARMS 17 attachment head

$550 shipped

*Will trade for Accu-tac FC-4, PC-4, or TBAC with an ARCA

Selling a timney elite hunter trigger I took off my seekins element rifle. Compatible with rem 700 footprints. Set at 2lbs, $120 shipped

I just got my stamp back on a short little .300BO set up. I have two .223 Accurate Mags and a .223 steel MDT magazine and neither one of them feed properly. The shortened overall length of the round is causing problems.

Are there .300BO AICS magazines out there? The only other magazine I know of is the MDT polymer magazine. I would really hate to have done all of this and not be able to find a magazine that works!

thanks

Nightforce 7-35x56 Mil-XT F1 (C613) sitting in ARC Medium (1.1”) M-Brace rings and Mk Machining 34mm XLP Billet Scope Level.

Excellent condition. Slight ring marks that are barely noticeable. Range use only with less than 150 rounds. Never used in a match

Also comes with original box and new sunshade.

EDIT: SOLD

Sold