Up for grabs a nearly new Leupold MK5/Mark 5 5-25x56 PR2, purchased new from CS tactical. This optic has been fantastic, it's performed exactly as it should, it tracks perfect and the glass has been excellent. I would say it's been out long range only a handful of times, it's been tracked out to a mile and was pefectly spot on. If you can find a New/Used MK5 PR2 in this shape at this price then jump on it. Not a scratch, not a ring mark, glass is perfect. Bell has protective scope tape on it, can be removed upon request.

Comes in box with level, scope covers, and all included original accessories, as well I will include the American Defense 35mm QD mount in Tan/FDE pictured below.

xxxxx shipped/insured PP F/F, or Zelle

No trades. This optic is in perfect shape and is in nearly new condition so Lo ballers will be ignored.

Thanks for reading

We have a few MARS Lc and MARSc in stock and ready to ship!
We are offering $1k off the list price until Sunday! Just text or give me a call at 214-507-7208 to take advantage of this deal.

These MARS units are very nice, solve quickly, and look cool (this is most important).
Complete with AB inside, Kestrel compatablilty, the 1550nm LRF performs very well.
The  Lc models have a vis laser to make zeroing it very easy. The C models get a IR laser and illuminator aswell.

I just picked up a Swedish m/96-38 and there are some aspects of the rifle that confuse me. I ask these questions having not handled an enormous number of them, but from reading The Swedish Mauser Rifles published by North Cape Publications.

This rifle was imported by Class Distributors in Swann, Vermont. The receiver was manufactured by Carl Gustafs in 1908. All the numbers match except for the magazine floor plate and the bolt stop, neither of which have serial numbers. That should mean that they were made by Husqvarna.

The rear sight is from an m/38, not an m/96-38.

Most oddly, the bolt has only one gas escape port, but according to the book, any rifle made after 1904 should have at least 2.

Does someone want to put this all together? I can't imagine an importer cobbled together a matching bolt from a pre-1905 rifle. None of the numbers look scrubbed. How about the rear sight? Has anyone ever seen a m/38 rear sight on a m/96-38? I can easily see anyone swapping out the magazine floor plate and bolt catch, though it seems odd with everything else matching.

Impact is in great shape, barrel has a few scratches on the finish but nothing major. 22” Bartlein #3b. Barrel has about 900 rounds through it. Will add the Triggertech Diamond for $250 more.

Barreled action $1500 shipped
With trigger $1750

For sale:

Safariland 6354RDS-4592 holster. Fits Sig M17/M18 or P320 with X300 or TLR1 light. Multicam. Excellent condition. Includes QLS fork.

$75 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

For sale:

Peltor Comtac V, single downlead, tan. Manufactured 11/2023. Used very little, great condition. Includes original box, manual, PTT and helmet pads. Only thing I don’t have is the little cloth storage baggie.

$475 shipped SOLD

I accept discreet PayPal or Venmo (F&F ONLY)

Like New Spuhr 5602 mount, bought on here but sold the Leup before mounting

*$300* shipped & insured. Zelle or Venmo only. No trades

Found

And now we wait, again. Last cans took 16 months. Hoping I can get in on this 7 day approval train.

Tudor Black Bay Pro. Comes on black dive strap, strap is unworn. Crystal is perfect, the high polish case has normal wear marks. There is one ding in the bezel at the 9 o’clock.

SOLD

No trades

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

Tactical Tailor 3-Day Assault Backpack Gen. 2, Coyote, NEW . NEVER USED -SOLD

Had one last batch show up this morning and when they're gone, they're gone. Message or call me with any questions or to get an order placed.

Trying to frame a lady for the murder of a dirty cop ?


And they had at least 250 murders , child rapists and fentanyl dealers just walking around conducting business - that the feds under new leadership rounded up in a few days - because they had pictures , knew their names and where they lived operated ? Yeah Pepperidge Farms remembers !

So the hands off oder was followed to man - so that not one pedo or mass murder had to worry about arrest or anyone getting in the way of their fentanyl trade .

These invading killers were not hiding in the woods or in caves , walking around metro areas without a care in the world - you might think you hate them enough but you don’t .

Have offered before, decided to keep. Now committed to sale as purchased AR-10 upper and will use 3-15 glass, and moving to prism optics on my ARs.

Scope is in mils, capped turrets, FC-DMX reticle.

Has full arca weight kit and clutch.

Will pull it off the rifle and get better pictures if needed

Not wanting to sell looking to trade only for a

FDE AX AICS Chassis, Rem 700 SA​

Arken EP5 5-25x56 with Arken 34mm Scope Rings.
Magnification: 5-25x
Objective Diameter: 56mm
Tube Size: 34 mm
Turret Adjustment: 1/10 MIL
Reticle Position: First Focal Plane
Reticle Details: VPR
Zero Stop: AZS Zero Stop System
Zero Reset: Yes
Elevation Adj. Range: 32 MIL
Windage Adj. Range: 16 MIL
Adjustment Per Revolution: 10 MIL
Parallax: Side Parallax Adjustment 25Yds - Infinity
Asking $450 OBO

[No time to ship to Leupold for repair w/match schedule]

Before I essentially take a thin notched washer and adhere the two parts together to remove the wiggle, does anyone have any experience retightening the inner ring?


Issue:

Was shooting in 35-40 gusting winds and I didn’t weigh my tripod down with my pack (like an idiot). So it took a hard landing on the concrete. Everything inside and optically is fine (surprisingly), but the locked down anvil head gave the RRS notched plate nowhere to go besides rotate into the threaded adapter at the base of the spotter.

Now the mounting sleeve (circle with the notch) is loose and the inner threaded circle is partially loose but doesn’t want to move more than 1/8” in either direction.

Anyone run into this? Advice?

Thanks

Parts kits are "firearms" and so are 80% receivers

I’m in the concept stage of planning a match and need some starting points on things that need to be addressed.

It will be a fund raiser as well as a primer for hunting season. So it’ll be simple stages tailored for the local population who isn’t into competing.

What are some logistics I need to take care of as far as legal, liability, etc? Is it even worth doing as a fund raiser once all the things are accounted for?

It would be on private land, not a dedicated range. I know things vary by state, but looking for a general idea.

Less than 150 rounds fired before reconfiguring build. 7 twist. $100 shipped

Cleaning up the shop and found a few items that have just been sitting around—looking for someone who can put them to good use.

ZCO 5-27 15mil NLE turret with MPCT3X reticle and black scope chap. Come with original box and all the accessories.

Like new $old

We can offer a combo discount for the Area419 or GrayOps scope rings. PM for more details.

I have a lightly used set of Bushnell Match Pro ED binoculars in 15 x 56 with shot-call reticle in box with pack, covers and everything that came from the factory. Asking $500.00 shipped with payment via PPFF and also includes a 3D printed mount, please PM with any questions.

We still have few more MDT CRBN Rifle stock in stock ready to ship.

3 - limited release Hyrdo-Dipped Veil Camo

https://precisionwerk.com/products/mdt-crbn-rifle-stock

And the Precision Bottom Metal

https://precisionwerk.com/products/mdt-precision-bottom-metal

Note: Discount code is below, or PM me.

Additionally, we have other MDT, Area419, GrayOps, Short Action Precision, TriggerTech, Bix'n Andy products in stock and ready to ship. Check out our full range at www.PrecisionWerk.com.

I have decided to go a different route, so up for sale is a Brand New Pulsar Thermion 2 LRF XP50 Pro, purchased in November 2024. It’s never been used, only taken out of the box for photos. Still has 2+ years of warranty remaining.
$4500 shipped
USPS MO / PayPal F&F / Venmo accepted
No trades. PM me if you have any questions.

SC Case

If "highly skilled" H1B workers are restricted to a specific field, how can their arranged marriage spouses be allowed to work anywhere without restrictions on H4-EAD? Granted that the H1B holder waited maybe six years to get their i-140 approved to be eligible for the spouse's H4-EAD but just because someone is on the path to becoming a permanent resident or a citizen someday is not a justifiable cause to start giving out jobs that are supposed to be for citizens.

My personal experience with one of these bitches at work:
- Was given opportunities in private companies by other Indians despite lack of skills.
- Cheats on a test, gets certified, and got the state job because muh diversity.
- Negotiated salary by lying to HR about her previous salary. Gets paid $130,000 per year. What in the actual fuck?!
- Hiring other Indians to state from other states. Using a loophole to stay out of trouble.
- Owns three houses and their 3000 sq. ft house in Arizona is too small according to this cunt.

I wrote to Stephen Miller, my congresswoman Mary Miller, and Trump's office. None of them responded. Apparently, Save Jobs has been fighting this for a while. This H4-EAD bullshit was an executive action signed by Obummer and despite Trump's efforts to get rid of it during his first term, they failed. Hopefully, they get rid of it this time.

Sorry for the rant but fuck, I can't stand this shit anymore. I might file a lawsuit down the road. The "poor hard working immigrant" bullshit doesn't apply to most of these non-immigrant work visa type motherfuckers. They come here just for the $ and nothing else. They have zero respect for this country, the constitution, its history, its values/principles, and pretty much everything this country stands for. Mind you, as of today 1 US Dollar is equal to 85.66 Indian Rupees.