34mm ring lapping kit. Still has grit left in the little container.
$25 shipped PP F&F

As title states $20 shipped PP F&F

About 9.5lbs of Sinclair of chromite heavy sand and a fill bottle from PMA. Stays together.
$30 shipped PP F&F

I have a American rifle company xylo rem 700 chassis that I'd like to trade for a manners lrh or mdt crbn for a rem 700 footprint. Would sell for 1000 obo will also trade for a triple pull or a long action magnum bolt face

I am reloading 7 PRC using Hornady Custom FL dies. After my 2nd resizing , loading for 3rd time, I noticed some vertical buckling of the case neck as shown in the picture? Didn’t happen on first resizing. These dies are new, less than 50 rounds. Is this caused by a build up of case lube on the neck? Is it safe to shoot? I’m gonna clean my die body and try another round. I am using some older Hornady Unique Case Lube. Never had this issue before loading 300 Win Mag for years?

Are they decent ?

Not much out there (high end ) barrel wise for 350 legend

Can anyone verify that Midwest Industries 308 upper receiver rod will work with an LWRC REPR MKII .308 upper?
LWRC is no help. Love their firearms, but it sure seems like they don't want their consumers to have the ability to work on their products. Appreciate any input

I know good aint cheap and cheap aint good, but I'm still curious- Do you guys have any suggestions for some 12x50s, for just casual bird watching and whatnot out the back kitchen window? I havent touched a set of binos besides my vortex diamondback HD 10x42s in years, so I've no clue if the cheap tascos or other Kmart brands have gotten better than they were in the 80s lol.
I dont need tangent theta clarity for what I'd be doing with these, but then I dont feel like taking a chance on the 40 dollar pair in the counter at the local sporting goods stores either.
Any suggestions?

I have 1,129 pieces, +/- a few, of once fired Hornady 6mm GT (GAP) brass for sale. 805 pieces have been deprimed and 324 pieces have been deprimed and cleaned.

$750 for entire lot. I will split shipping cost to lower 48 if you buy all of it. Not haggling on price.
$0.75 per piece for smaller lots and buyer pays all of the shipping.

Send PM to communicate.

Selling 1 pair of Seekins 34mm rings. They are X High (1.26”). They were mounted for about 200 rounds. $110, shipped to you.

New in box. Box opened but scope has never been mounted. Comes with everything as new, scope caps, sunshade, beauty ring and owners manual.


$2500 shipped. PayPal F&F or G&S buyer pays 3%.

Only trade would be Gen3 Razor6x36 mil

As the title states, 15 round aluminum mag for sale. $135 shipped.

Up for sale is a Vortex Precision Extended Cantilever Mount 30 mm.

$175 shipped

Pm if interested.

AR-10 SI Defense (Now Falkor Defense) Billet Upper, Lower & Hand guard with Midnight Bronze Cerakote
McGowen barrel chambered in 6.5 Creedmore 1-8" Twist, Stainless, HBAR Contour w/ .750" Journal, 5/8" x 24 TPI, Recessed Crown, 20" Long
Hogue Grip
Seekins Precision Charging Handle
Seekins Precision Ambidextrous Safety
Seekins Precision bolt catch
Strike industries mag release
Strike industries forward assist
CMC Trigger
Luth AR stock
Great shooter just don’t get much use out of it and need money for other projects. Less than 100 rounds down the pipe. Open to trades for scopes, barreled actions, thermals, manners stocks, mcmillan stocks, Rem 700, etc..
$1000+Shipping

Up for sale is a Vortex razor 1-6x, E in mrad.
I recently purchased this and decided to go another route. Includes scope caps and lower lever.

Sold

No trades.

PM if interested

Guys - buying a Wilson combat rig. They are building upper custom. Trying to decide between 16" and 20" barrels in 6.5 CM.

Cannot suppress yet until CA changes its laws but will use heavy duty brake and Magpul PRS stock with JP Enterprises recoil spring.

With that set up any concerns with mid length gas system?

Looking to sell my All NEW Tan Cadex R7 338lm Shp 27" bartlein barreled action in a Lite Strike chassis complete with cadex evo trigger. (Rem 700 footprint 4lug 50° throw)

Comes with pictured 2 - Rare FDE 338LM 3.850 AICS Mags purchased through brownells at $100 a pop.

THIS IS LIKE A CDX R7 LCP EXCEPT IT HAS THE FULL TOP RAIL FOREND FOR CLIPONS AND OCD FELLERS LIKE ME.

Has 10, yes only 10 rounds down the tube when it was zeroed, will include the 10 fire formed brass with the rifle for them fellow reloaders.

Asking $5000 shipped
FFL to FFL.

Unique gun.
Mg2 foundation
Impact action is right bolt, left port.
308 bolt face
Aw mags
Will include barrel and bottom metal. No trigger.
3000 shipped.

New, unfired action. Black. $750 shipped to FFL. Action has been installed to check fitment. Also have Aero action wrench for $75 (SOLD). Paypal f/f or venmo gift.

RRS BTC-pro dual clamp, had it on my Atlas for maybe a week to accommodate a new rifle with a pic rail, ended up just getting a ARCA rail for it so no longer need the Dual Clamp. Also have a Recoil X .30cal suppressor brake, maybe 20rds actually fired through it. It fits the diligent defense Enticer line and dead air Nomad, liked it but being its on a hunting rifle I wanted a short profile.
RRS BTC-Pro-$50
RecoilX Brake-$150

looking for

- isight wmx200 flashlight. Open to a fixed mount or rotational, navsea marked or not. 650 +
- Leupold Vari x 3. 2.5-8x36 with the tall target turrets. a contract scope is a plus. 500 +

I recently had the good fortune to play with a Franchi Momentum elite varmint rifle chambered in 6.5cm. If you too find yourself a little curious I wrote down my thoughts on the rifle for those interested.


Read Franchi Momentum

Wanting Leica geovid R 10x42
Original box and all

Venmo, face to face meet up, PPGS, Cash.

Can FaceTime text whatever makes you feel comfortable. Plenty of vouches for high end stuff on Facebook.


1000$ shipped

Looking to buy a set of RF binos.
Vortex FURY hd with ab.

Anyone know why these got discontinued? Anyone take up making them? Was at a pretty muddy NRL hunter match and started looking around for something and found these only to find I couldn't easily get one. Looking for other options