Stainless, M24 profile, 26” 7.5 twist 5/8x24. Brand new. Only removed from packaging to take photos.

$770 shipped to lower 48. PayPal Friends and Family or you pick up fees. Zelle and Venmo also work.

Life is changing, and I am leaving the sport for now. Here is a list of things that I have left. I will post more pics of the other items when I get home this evening IF they haven’t sold before then. PM me “I will take it” to stop scammers. No holds. All prices are shipped.

Payment via PayPal F&F, Venmo, or Zelle


1. DNT SOLD

2. Manners TCS MAX. SOLD

3. McMillan U1 SOLD

4. REMOVED

5. Garmin Xero C1. Like new. $450 SPF

6. ARC M-brac. SOLD

7. Gray Ops Shorty Arca SOLD

New guy checking in.

I am looking to buy a PDP Magwell from a steel frame PDP Match. Show me what you got!

I am looking for a knights M4 match marked 99167 rail to finish a mk12 mod 1 build. Can be Vero or Titusville. looking to pay around $1250. If cash doesn't interest you I have a fair bit of hard to find knights stuff id be open to trading

Ladies and gents, it's that time of year again. I'm on vacation in Kissimmee with the family.

Last year we talked about gators; as there were/are still a few that now appear to live at the resort we stay at. Kids have already dragged me to the ponds to see if there were any gators/turtles/wildlife, and most certainly there was.

This year I've got a different request. I'm a carpenter by trade, and I'm looking for a cool tool store to check out. We don't have many at home in ME, so being able to see/handle things before purchase becomes difficult. This is pretty much the extent of what we have at home:

www.bistools.com

Specifically, I'm looking for a Martinez hammer. Not that I can't buy one online, I'm just a brick and mortar type of guy. So, if anyone knows of a cool construction tool store around Kissimmee/Orlando/Orange Lake, I'm all ears. Thanks.

Hello gentlemen,
after my last shooting session I measured my cases and I find some differences on headspace.
I tested some charges and the headspace are differenti from the low load to the ho load but from 1.4710" to 1.4700"

So I've made a resetting on the Forster FL Bushing sizing die for a 2 thou down from the fired case headspace, assuming that the 1.4710" of the hi loaded case are the start point.

My scheduling are the following:
- Bump the shoulder without the bushing for obtain the 2 thou of headspace (only for One or two case as reference).
Check on the chamber, ok!
- insert the bushing and resize the neck.
Check on the chamber, ok!
The bolt fall down free.
- expand the neck with mandrel.
Check un the chamber, ko!
The bolt don't fall down free, need finger help.

The headspace of the resized case are 1.4690"

I think that the mandrel, when open the neck, open also the apical section of the shoulder and change is angle.

If I think wrong can help me to solve this issue?

Thanks

Used like less than 50 hours, pretty much new.


Does not come with spec sheets

Comes with:
Pvs31a battery pack + cable
Brand new g24 mount

9500 shipped, local pick up is in southern California, Santa clarita. No TRADES please, I need money for medical stuff.

Tract Toric UHD 3-15x50 BDC scope MOA with turret kit. SFP.

Like new, no marks on the body or the glass. Only been to the range a handful of times. Comes with original box. No trades

ARC 1” M-Brace rings (med height) can be purchased with the scope if so desired.

Price includes shipping and insurance:

• Scope w/ rings $700
• Scope only $575

Paypal f&f, Venmo

I currently have been shooting my Bergara Ridge Wilderness in 308 a bit more and really liking the more precision stuff. It's been my hunting gun for a while and recently dropped it in a HMR stock. Its barrel is only 0.716" thick at the muzzle device so it definitely heats up pretty quick, especially with my suppressor on there.

I'm curious if it's better to get a thicker barrel, maybe some around 0.85"-0.95" or just get a different rifle. I do really prefer to use one gun so I can train like would hunt, which is why I'm looking at a sub 1" thick barrel. Keeps the weight down but offers increased rigidity and heat performance without weighing 20+ pounds.

However I do have my OEM stock still and could just get a barreled action in 308 R700 pattern. I could swap the stock back and move my scope over for hunting season and back to a range rifle the rest of the year while I save for something nice to put on there.

I'm considering investing in magnum / big bore muzzle break & a suppressor for a few projects ( 300 RUM / 300 NM with ELR in mind).

Over the last few years I've standardised all my muzzle thread to 5/8" 24 tpi.

But for large caliber, long heavy barrel ( 28" - 30" - 32" ?) I'm wondering if it is not too small? A 3/4" 24 tpi would have more meat?

I already have a 7/8" 24tpi on my 33XC, but options are limited in that size.

Any thoughts or experiences to share on this topic?

- Has a vertical grip from Black Collar arms
- upgraded adjustable mag well and the thumb rest.
- TR2 buttock. Black in color. Weighs 3lb 2oz.

Could trade for a rangefinder +-cash on my end.

Asking $475 TYD. Let me know if you have any questions.

Lightly used 2 stage diamond flat trigger shoe. Can’t seem to find the original box. Asking $sold TYD

Been reading reviews about the mercury recoil reducer, some say the mercury helps reduce recoil others claim it's just the weight. Wouldn't putting steel cold roll or lead in the bolt hole do the same thing without the chance of a leak.

Selling my very lightly used AGM Rattler v2 35-384 thermal scope. Excellent condition, includes factory box with all accessories. Amazing little thermal for the price with a phenomenal battery life. Feel free to message me for videos of my predator kills to see the quality. $1850 shipped

Question for the Hidemind,

I want to build a 223 trainer setup like my 6.5 CM - impact action in an MDT chassis with 28” MTU contour barrel.

My smith stocks 1-7 twist brux barrels and his 223 reamer’s freebore is somewhere in the 0.100 / 0.125 range (he has to confirm exact dimension with me).

The thing is, I will be shooting factory ammo for the forseeable future. So no rounds longer than SAAMI length at least for now.

Who has experience with this much jump and factory ammo? Am I shooting myself in the foot?

69 and 77 SMKs loaded by whomever are on the menu, and maybe some factory loaded bergers.

Thanks fellas.

A poormans Flux Raider setup ready to roll. New, no box. Includes the chassis, front mag storage and Midwest Folding Brace. $260.

New condition terrapin X $1000. Will FaceTime or verify however you want

Looking to part ways with my Barrett mrad (EJ serial with the dimple)

It has a 17” .308 1/8t barrel with 600 rounds exactly on it, all factory ammo. Will come with the rrs arca rail, bore guide and bag rider, two mags and the case.

Asking 4750 for the package. (Optic and suppressor not included, will come with factory brake installed)

Located in Jacksonville, NC

Please text at (nine 1 3 nine 6 1 three 5 20)

M-Lock versions. Both have seen about 150rds. Have the box for one, no idea where the other box dissapeared to.

$125 each shipped
$225 for both shipped


BOTH SOLD!

Falkor LW7 with a 26” 6 creed proof comp contour barrel. Thing shoots well. Handloads and factory ammo. Have 200 pieces of once fired alpha brass I’ll add for an extra $125. Has 600 rounds down it.

For sale great condition Mark 4 Hd 6-24x52 PR2 mil reticle, turret tape, AADMOUNT caps $SOLD shipped.

NIB Tangent Theta 3-15x50mm LRH. It has never been mounted in rings, effectively brand new. Amazing clarity and detail glass, bought for a lightweight build that’s no longer happening. LRH MRAD reticle

$3100 shipped

Venmo, Zelle or Certified Bank funds

No Trades Please

PM me for any questions, thanks for the interest

Two vets recon original. $450. Has some blemishes but works as it should. Does not include obi or ball head.