I haven't loaded subsonic 308 in about ten years. I want to shoot subs in a 16" barrel I've got. Trail boss was my go to back then but I guess now it's gone.

I've been reading some old thread that Green dot will work.

I've got some left over and was wondering if anyone can share their data in 308win. I've got 190 sub x and 213 eld's to load.

I can't find any published data for it

Thank you.

In good condition, glass is excellent. I took a picture of every blemish I could find on the scope, didn’t find any on the glass, lumina caps have been on since day 1.

Scope with Caps $1800. If you want the ARC rings add $140.

Excellent condition

Both are 34mm, 28mm tall.

Asking $135 a pair.... one pair sold

Like new condition... for 34mm scopes

Asking $135 shipped

Like new condition Tangent Theta Gen2XR.

Includes MkM scope caps, anarchy outdoor throwlever, removable turret tape, ARD, box and manual.

Asking $3350 shipped

Hey. I hate that I have already sent the rifle off without getting to try my Griffin PSR can I had BSD Fabrication jail break for me to us with the CA762SSAL/RE flash hider. He used one of his warlock mounts which uses an 1.375 x 24 thread and I am sure if you wanted him he does the warden conversions and could use it. Only thing we did was put a tiny pin on the underside of the flash hider so it locks into the grove that a new style SureFire would use. It’s barely noticeable. Once again I wish I had a picture before it left to get a little repair work done.

I just wanted to share he did a real nice job was easy to deal with and did a good job of keeping me updated and did not mind me asking questions. I just wanted to share in case someone was looking for away to get a suppressor for their older style mount. I will give a complete update when the rifle comes home and I get to go shoot it. But here’s a few pictures.

It will need to be Cerakoted once I get it tested. Or I’ll just buy a mirage cover and won’t care because it will be covered up.

Scar 17 FDE for sale. Rifle is in excellent condition and functions perfectly, charging handle is reciprocating. Has approximately 500 rounds down the barrel. Comes with the following:

- Six 20 round magazines, 3 brand new.
- Geissele super scar trigger
- Magpul MOE vertical grip
- Hogue rubber grip
- PMM QD attachment points, two front and back
- Ergo rail covers

$3000 shipped to FFL. Not looking for trades.

I am parting with one of my rch Belgium Scar 17’s. This gun has 300-400 rounds through it. I am the second owner and have only put a few mags through it. I have several and I just do not get out and use them very often, so I am getting rid of one. It is all stock. Please message with any questions. Only trade I would consider is towards an mlok Barrett MRAD. $2550 ***SOLD***

TacSport Pro single stage
Used but still in great shape. Pulled this off my RimX and has the low sear installed.

$150 shipped conus

L3I Dina forend brass weight and brass weight inserts. The brass weights have some glue on them still.
Make me an offer, no longer need these.

$75 shipped conus


Due to scammers do not reply here, PM me with any offers or questions.

Hey guys,

I’m toying with the idea of selling my SRS A2. I just don’t use the multi caliber system like I thought I would so I’m considering offloading this and getting into a dedicated 6.5 for my general plinking.

Here’s what the package includes: DT SRS A2 chassis with both covert and regular hand guards, parts kit, DT action screw torque wrench, DT general maintenance torque with bits, 26” 6.5 conversion kit (~1.1k rounds on the barrel), 26” 338LM conversion kit (20 rounds on the barrel).

This thing shoots lights out and is in great condition. I’ve just got the bug again.

Looking to get 6k 5.5k cash or 5.8k trade value for everything. I’d throw in the gen 1 razor and rings for another 1k. Suppressor not included.

Would consider trades + cash. I’d like to get into an AI 6.5CM of some sort. Might consider other trades, let me know what you’ve got.

Lightly used Sunwayfoto IB-30, in great condition with only minor wear marks. Comes with the original box and and Arca plate. Similar in design to the RRS Anvil 30 but way cheaper.

$120 shipped. Venmo or Paypal

Selling a box of 500 Nosler 185gr RDF 7mm. Opened box just to inspect.

$210 shipped. Venmo or Paypal

McMillan A3-5 Stock – inletted for Howa 1500 or Weatherby Vanguard

Selling a McMillan A3-5 stock inletted for a Howa 1500 long action. I picked it up last year, and it has only been to the range twice, with approximately 40 rounds on it, basically brand new. Great stock for a large magnum.

I widened the barrel channel to accommodate a magnum contour with a 1" muzzle circumference.

Specs​

• Adjustable Cheek Piece
• Bottom Metal Inlet: Atlasworxs DBM (Also fits stock Howa hinged floor plate)
• Camo Pattern: Hard Edge Arid
• Sniper Fill
• Weight: 3lbs 12oz
• Recoil Pad: Decelerator with spacer system for adjustable length of pull
• Attachment Points:
  • 2 sling studs up front, 1 rear stud near the action screw
  • 2 QD flush cups mounted on the left side for sling attachment

$750 Shipped

Feel free to message me with any questions! I have more photo's but for some reason they wont upload. I'd be happy to send them in a private message if you're interested.

I'm looking for inexpensive OEM slides for a 19.5, 17.4, and 17.5. Will consider deals on full OEM pistols.

I do NOT need offers to purchase for anything other than the above models stated, either as OEM slides, or OEM pistols, period. No aftermarket slides, no other models, calibers, or suggestions. They are for R&D purposes with one of my clients.

I have a lightly used set of Sig Kilo 10K Gen 1 range finding binoculars that are in excellent condition with bino mount, original pack, harness, paperwork and box. Asking $1,000.00 shipped and insured with payment via PPFF and will get you tracking asap.

Foundation Centurion for a right hand RimX action with the lightened butt stock. Comes with the Hawkins DBM and the Foundation arca rail. Ordered this a few years ago and only shot a few matches with it. Other than some glue in the pockets were the forend weights were. The stock looks brand new.

Stock, rail and bottom metal
$950 shipped conus
PayPal F&F, USPS MO or personal check but won’t ship till funds clear.

No trades

Due to scammers do not reply here, PM me with any offers or questions.

What it looks like with barreled action in it.

Selling a set of Tenabraex scope caps for S&B 5-25 optics. The covers are factory FDE and are in excellent shape with minor use. Comes as shown, ready to install.

Sold

No trades please.

Used pair of Warne mountain tech, high, 34mm rings. They have "oh crap" marks on the side but not too bad of shape. $50 firm PayPal f&f.

Got these from a guy on eBay. Super impressed with the quality. Not sloppy at all and he will custom make to what ever caliber

Login to view embedded media

Login to view embedded media

Login to view embedded media
And don’t forget where it all started 5years ago in AZ
Login to view embedded media
So over at least five years across multiple states and multiple counties in multiple jurisdictions. It’s a nationwide racketeering scandal carried out by organized criminal organizations.

This phenomenon caught my attention last winter when a small MI city police arrested a executive from Thailand visiting one of his manufacturering facilities and I guess Asian men in suits is a huge trigger because they arrested him for DUI- even though he blew 0.0 because as was caught by body cam- “that way we can hold him until at least Monday and figure something out by then” end quote
This fake dui arrest victim is half owner of one of the worlds largest manufacturing companies Thailand , Philippines, Japan , US Canada Mexico . And I haven’t heard anything on this MI case in few months but the lawsuit amounts mentioned were like 3.5 times the size of the Village budget . And I got to thinking what happens to the poor fuckers caught up in this policing for profit scandal that are not international billionaires?

I have two of these and want to upgrade one of them to something nicer like a Dan Wesson Specialist, which would be the only possible trade. Good condition, a couple small scratches, just cleaned at my gunsmith and both springs replaced. Shoots like a dream. Comes with one mag which I forgot to photo cause I didnt sleep last night.

$750 TYFFL Or FTF in Oklahoma

Very good condition, no packaging, $110 shipped

Whilst I wait for my barrel to get chopped, I have a mount question. I'm building up an elf owl build, and I plan on using a PST Gen II 1-6. EGW High Rings? PSA Sabre (Warne) mount? Steiner P series mount? PA Glx? Something else? While I like my ADM mounts I really have NO need for QD, so I thought I'd save some bucks there. But I'm still uncertain if I should just go with rings or a mount?

Selling a like new Maven RS1.2, SHR-MIL. Glass is pristine and couldn’t find any marks on the body.

Currently mounted in a pair of like new ARC rings (med). Can sell with or without rings

$old shipped - no rings


Insurance included

Paypal f&f, Venmo