Gents, I have been scouring the forum for info and I'm stuck in a feedback loop in my head. I want to put together a precision gas gun in .308 (because I have access to the ammo). This would be for range use, primarily, but I like to build duty-quality/reliability rifles. I had settled on Seekins builder sets for receivers/forearm because you minimize/eliminate the pressure on the barrel nut when you run the rifle on a bipod. I've discovered that they are very hard to find and expensive as hell when you do find them. My questions are these:

If not Seekins, whose upper/forearm combo is best for elimination of the input into the barrel when using a bipod? I love the direct forearm-receiver attachment but Seekins, Mega/ZEV, etc don't seem to be obtainable any more. I wish Larue had a large-frame builders set.

Am I going to spend as much money building one of these as I am buying something outright from JP (highly recommended) or an SP10 from Seekins?

I've been following @Bigjake83's posts regarding small frame precision rifle building and have used his formula to put a dandy small frame recce rifle together. I'd like to try it with a large frame.

Any input? Am I just spinning my wheels?

Thanks for your time.

looking to pick up a C4 from KRG. open to offers

Thanks

Ever since bigger stock companies have "trimmed the fat" for stock inlets, the tempo here has gone bezerk.

This is our "bedding ready" inlet for the M77 action from Ruger. It's now a std service. The receiver surfaces are offset by +.05" so that the resin casting isn't paper-thin in some spots and fat in others.

So not only does it target them and organizes violence against dealers and owners... it has a "Molotov Cocktail" icon to encourage arson and attacks.

Tesla owners were the darlings of the left until just a few weeks ago. Saving the planet and all that...

But someone took away their Twitter... and now is cutting their funding. So the answer? No... don't come up with better ideas or better political messages... nope, turn into domestic terrorists.

Bondi and Patel have said Tesla attackers will be treated as domestic terrorists. So let's see these idiot start to go to jail and if they cause injuries or deaths, they can ride the needle.

They are unhinged and unleashed! And life means nothing to them because they now think Tesla Owners are committing genocide...

Heads on a swivel, folks. They won't stop with Tesla owners! And when their molotov bombings don't work out.... they'll go after something new. With just as much violence. Churches? Elks clubs? Schools (as usual). Your restaurants that serve that meat (which is murder, after all). These folks are unhinged. And are being turned loose on America.

Sirhr

T-slot extractors BE GONE!

Have an itch for a precision Gas Gun with a nice optic. Have access to range out to 1000 yards. Steel every 100 yards.

Wanting to go with Seekins for the reputation of accuracy, etc

Can’t decide between the 18” DMR in .223 wylde or the SP10 in 6.5cm 22”. I understand they have the 6ARC in the DMR but for what I already have I want to stay with the .223 or 6.5cm.

For those that have had gone down this road or are on it would you recommend the AR15 plateform or AR10? Both, from reviews, are going to give me sub MOA accuracy with match ammo.

DMR $1,800
SP10 $2,800 (worth that extra grand?)

Thoughts? Best bang for the buck?

$38 shipped

1250.
no expiration.
Good for 2500 towards any suppressor, including the 50 cal.

Silencerco Scythe TI 100% cert…
$800
These are very nice cans.

Seekins Precision PH3 6.5 PRC 20" Woodland Shadow​

We have (2) Of these rifles on the way to us as I write this, both are Woodland Shadow. They will not be on our website just yet, we wanted to offer them here first. They will be $1849.00 + $65.00 shipping to your FFL. Message us if your interested in securing one or have any questions.

https://www.driftersgear.com/product/ph3-6.5prc-woodland-shadow-20

Drifters Gear
1127 Martin Downs Blvd
Palm City, FL 34990
(772) 202-0541

MPA Matrix Pro RH 700 SA Black. Includes EVG grip, barricade stop. She's been rode hard and put up wet. Will have original cheekpiece installed not the Bison Cheekpiece shown.sold shipped

I have a bergara bmp chassis and I’m wanting to convert it into a folder. Have a design worked up already to convert it to a picatinny style stock mount but before I put in the time and material I was looking for advice or measurements of different folding stocks from center of the pic mount to folded edge of the stock because the rear of this seems a little thick for some of the folders I’ve seen. Just want to make sure I’d be able to get the stock folded completely. Thanks in advance.

I bought this here on the Hide unfired. I fired it 10x Sub MOA with Hornady factory ammo.
300 PRC GAP Templar branded Defiance action.
24” Bartlein heavy varmint #9 barrel with 1:10 to 1:9 gain twist, 5R rifling. Threaded 5/8x24 with protector. FDE cerakote with micro slick on the bolt. Gunsmithing by Weber Customs. BA weighs 8lbs, 5ozs. A couple of very light handling marks on the barrel and a little bit of wear the micro slick in the bolt (see pics). All in all, it is in excellent condition.
$$ 1400 shipped to your FFL
Be sure your FFL accepts from a private party.
PayPal F&F or Venmo
No trades at this time

Great magazines this is a spare set that needs a new home. Able to shoot 6.5 CM with spacer installed and feed 7 PRC just fine in my experience.

$20 shipped for spacer

PPF&F

AccuTac PSki feet (New)
$95 Shipped tyd

First I'll take it gets it!

EOTech EXPS2-2 Holographic Sight/No box or papers, optic only. Sat on a rifle for a bit in a safe but never saw the range. No cosmetic issues.
$400
Check out my TacSwap for positive feedback.
https://www.tacswap.com/user/shadynd

Text 513-905-7058 if interested, Thanks.

Holosun HS507C X2 Red Open Reflex Sight 2MOA/32MOA Circle/Brand new in box.
$235
Check out my TacSwap for positive feedback.
https://www.tacswap.com/user/shadynd

Text 513-905-7058 if interested, Thanks.

Two EoTech 512’s NIB
$400 ea
Check out my TacSwap for positive feedback.
https://www.tacswap.com/user/shadynd

Text 513-905-7058 if interested, Thanks.

Selling my new and Unfired Rost Martin RM1S. This comes with the factory trigger as well as their metal “performance” trigger. Also comes with a holster.

$280 shipped

Used but in perfect functional condition
Non Bluetooth model
Includes a GrayOps arca mount
$3000 $2900 $2800 $2700 $2575 $2450

For Sale: I have a gently used Spuhr SP-5006 mount looking for a new home. Comes with original box with wedge. Great used condition.
35mm tube, 1.35” height, 0 MOA
Asking $Sold

new, never worn. Polarized Emerald Mirror lenses.
$125 shipped OBO

Don't really want to sell this but I never shoot it and it takes up a ton of space.

This is a very nice condition USP Tactical 45. Date Code AD which is 2003.

It comes with (5) 12 round magazines and (2) 10 Rounders.

It includes Laser Devices Blast Laser/Light Combo. This is period correct and these things can go for $500-$800 for themselves alone.

Also included is the Green HK soft case. These things are also really hard to find.

$1400 Shipped.

Will get pictures up later.

Thinning out the herd and this thing never gets shot. You just dont see them in this nice condition.

Its a 1993 West German Sig P228 in Excellent condition. I would rate it 95-98%. It will come with one 13 and one 15 round magazine.

$800 Shipped

Will get pictures up later.

Ace Brakes all 5/8x24
6mm used only 2 set screws $110 SOLD
6.5mm used $125. SOLD
6mm New $150