HELOS BTR GEN2 2-12×42 AHMR2 FFP IR MOA Authorized Dealer $344.00 delivered

Darn Fine Shot
[email protected]
ph. 812-917-5653

Surgeon SA 591 Repeater Action and .308 Win Barrel

• 2006 action was purchased from Surgeon, then in 2007 sent back and turned into a Scalpel
• Barrel is Krieger #10 MTU 26” spiral fluted w/ 1-11 twist, recessed target crown
• Cerro Coated O.D. Green
• Shot it for approximately 2000 rounds, started another build which used the trigger and chassis
• Been sitting in the safe for last 14 years, time to let her go
• ships from my FFL to your FFL (lower 48)
• Please PM for more conversation, additional pictures, and payment info

Thanks for looking

Vortex viper PST Gen II with EBR2C Moa reticle and a sp3602 spuhr mount. Comes with throw lever. Great condition. 800 shippped.

Just saw he's calling for all out mass demonstrations against republicans nationwide. Well then, bring it! Texas is waiting.
Hey Sirh, this is your neck of the woods so are you in fear of your life? Oh wait, I forgot, don't you have a cannon

Selling ZCO 5-27 mpct2 with sp6001 spuhr mount. Has some scuffs due to wear. Just got it back from ZCO and they checked it out and upgraded the elevation turret to non-locking. ZCO gave it a clean bill of health. Won’t sell the mount until the scope sells. Asking 3,600 shipped.

Great condition pig saddle $100 shipped firm lower 48. PayPal F&F.

Never really messed with shorter barrels before but starting to. (16" 6.5cm)

Initially not impressed with accuracy using ammo I loaded for my 26" 6.5CM.

I know it will be was down on Velocity (getting about 2550 instead of the 2800+ I was getting).

I got wondering about how much velocity you really need to stabilize 123gr and 140 gr.
I know I won't be able to get the velocities I achieved before without being way over pressure.

Curious how diff people's loads are for shorter barrels vs longer and effect on accuracy?

Vltor 13” Freedom Arca/Mlok rail - $240 shipped

Brand new, never used

Discreet PayPal F&F or Zelle preferred

PM before posting here to avoid scammers — I will not PM first

Spuhr SP-4601 Mount - $330 shipped

The mount is used, but in excellent condition. Includes a leveling wedge, but no box.



Spuhr HP30-19A rings - $170 shipped

These are brand new, never used

Discreet PayPal F&F or Zelle preferred

PM before posting here to avoid scammers — I will not PM first

Accu-Tac BR-4 G2 Arca
In good condition, a couple nicks on the apex
Comes with original box
$250 Shipped PayPal or Venmo

Leupold Mark 5HD 3.6-18x44 M5C3 TMR - $1550
This is the non-illuminated model
Scope is basically new, was only mounted in rings and sat on the gun, only reason for selling is to get a tremor 3 reticle illuminated one
The box manual and everything are included

I prefer venmo or zelle but can do PP if you add the fees
The only trades I'm interested in are listed below

Trades I would consider +/- cash are
Leupold mk5hd 3.6-18 tremor 3 or h59
Leupold mk5hd 2-10 CMR
Nightforce atacr 4-16
nightforce nxs 3.5-15 mil FFP
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)
Kestrel 5700 AB
Badger m4 SA bottom metal

Reptilia 34mm 1.54” (39mm) high AUS Mount 0 MOA
Black in very good condition, comes with original box
$200 shipped PP or Venmo

Leupold Mark 5HD 2-10x30mm M5C3 TMR - $1550
This is the non-illuminated model
Scope is new, was only mounted in rings and sat on the gun, only reason for selling is to get a 3.6-18x tremor 3 reticle illuminated one (or eventually a 2-10x CMR illuminated)
The box manual and everything are included

I prefer venmo or zelle but can do PP if you add the fees
The only trades I'm interested in are listed below

Trades I would consider +/- cash are
Leupold mk5hd 3.6-18 tremor 3 or h59
Leupold mk5hd 2-10 CMR
Nightforce atacr 4-16
nightforce nxs 3.5-15 mil FFP
mcmillian xm3 stock
zermatt/bighorn origin/tl3 short action (action only)
Kestrel 5700 AB
Badger m4 SA bottom metal

I have a Christensen arms mpr Competition rifle in 308. Bought it today and slapped a scope on it that didn't have a home (votex viper pst 2) and some medium pmr rings and was ready to go for tomorrow to test it out. As I was starting to clean the rifle I noticed the objective lense barely clears. Like so close it's insane. As I looked however the barel is free floated the entire way down the stock forend and upper (rail? Idk what the hell it would be called) My question is due to the barrel not touching any of the upper and lower forend does it matter that the objective is damn near touching the upper section of the forend? Any help guys would really be greatly appreciated. Attached are a few pictures I did the best I could to get them a few minutes ago.

Dead Air pattern recoil X 125 shipped

AI AT barrel 6.5 creedmoor 16" 465 shipped.
Contour looks like factory AI AT/AE. It is a Proof barrel. Stainless 4 groove traditional rifling. Shoots cloverleafs.
About 260 rounds on the barrel.

MDT adjustable bottom metal for M5 cutout 250 shipped. It’s brand new just went a different route.

Like new 16” 308 chrome lined LMT MWS quad rail upper. Complete factory gun with the factory torque wrench and 2 new Pmags. Round count is under 500.

2450 - $2300

Trijicon ACOG 308/762 BDC tritium is very faint light but the etched reticle is fine. Very light use on this old work horse.

500

Package deal 2650

Trying to offload a couple optics and mounts

Razor 4.5-27 $1700 optic, scope caps, throw lever, and accuracy first bubble level(comes with original box/sunshade)

Strike Eagle 3-18 illuminated $SOLD optic alone(comes with original box/sunshade)

Badger ordinance 34mm mount $220

JP 34mm mount 20MOA $200

Nightforce unimount w/diving board $300

Hog saddle mod 7 $200

Leupold Mark 5HD 3.6-18x44 with PR2-Mil reticle. Original box, sunshade and flip caps.

**Rings and bubble level NOT included.**

$SOLD shipped

PayPal Accepted

I was able to find some extra toolheads and now I need a couple of powder measures and powder dies to make complete toolheads so be lazy and just swap toolheads to change calibers. Let me know what you have. Thanks.

Selling my cert for a 100% off the new Hawkins precision updraft brake. $120.

This started as an idea and is now a reality! I started a thread on AccurateShooter Forum to gauge interest in gathering a group together to purchase custom cut case foam for the SEB Neo-X. Needless to say, there is massive interest and I put together a list of 30 people interested in getting in on something. I met with the designer today and approved the prototype the order is officially placed.

This post is for custom cut, heavy duty, closed-cell case foam designed to perfectly fit the SEB Neo-X. This stuff is firm, holds upto 50lbs, is self healing and resistant to oil. I had this designed to be a direct replacement to the bottom half of an Apache Model #4800 found at your local Harbor Freight.

This post is for the remaining 30 units that will be available to ship in 3-4 weeks when production is finished.

Price is $130.00 Shipped & Insured

Who wants one? Reply to this thread and send me a PM

(Fyi... Thread is cross posted on AccurateShooter, LongRangeHunting and Rokslide Forums as well.)