GrayOps Mini Plate and pad. Both excellent condition.

Zelle or Vemno preferred.

Atlas BT35-LW17 5 H bipod. No range time so more or less same as new.

$225 shipped.

AI with Primal rights BR kit $55
Magpul with BR kit $25

Area419 RailChanger and Pint Size GC. Both are excellent condition. Bag is super light....like 1 pound.

Zelle or Venmo preferred.

The action is a Savage 110
The stock is a Bell and Carlson
I added AICS bottom metal and Mag
The barrel is a FAXON M24 Contour Blank 27" 1:10 Twist

First I zeroed the barrel in the lathe and cut the receiver threads, then chambered carefully. I then cut the muzzle for a brake 5/8 24. I had to seriously inlet the stock to free float this barrel.

Out at the range today, the rifle is shooting the federal fusion tipped 180gr over 91.5gr of N570 into a single hole, 7 shot group all can covered with a dime. Seems this one is good to go now. Very low recoil, like shooting a 22 250.

My data shows 91.5gr (Max safe published load) of N570 is around 64k pressure but I see NO SIGNS, running a 180gr pill at 3300fps should be serious medicine for the dear this year

Hand held Modlight. Runs on the full size rechargeable 18650’s for 75 minute run time. Light head is the PLH-V2. Comes with one battery and charger.

$125 shipped.

Trying to recovery from a recent vehicle break in, so here’s a small list of things that has been sitting in the safe too long. Also located in South Texas if you wanna meet F2F. Zelle is preferred but I can do PP FF or G&S

Left handed Browning A-Bolt Medallion 270win 800$ TYD FFL to FFL SOLD

1. Barrel was cut to 18” and threaded to 1/2-28. Has a cheapo brake on it. Originally shot suppressed.
2. Ernie’s trigger spring
3. Harris 9-13” bipod
4. Leather shoulder strap
5. Sig Buckmaster 3-12x44mm (bore sighted)
6. 37pc of Starline brass, cleaned, AMP annealed, sized, trimmed and chamfered.

6GT 28” MTU bartlien Barrel chambered for Impact by RBGW. Only has about 200rds through it and it shot great.

Alpha 196pc of brass. 106 1x fired and 90 virgin. 150$ TYD

Bergara B14r LH HMR stock. Bedded for the B14r action 300$ TYD

710ct of 107SMK. One box sealed, other box has 210pcs. 200$ SOLD TYD

MPA tripod Lock 100$ TYD SOLD

Had a spare Impact 737 taking up space in my safe. No bolt included. Low round count, I think this one only had 60 rounds of 223 through it.

I'll cover shipping & shipment insurance.

PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$LOL @NoaWilli

Keltec KSG 12GA. Probably has 100-200 shells through it. Minimal wear, spent most of it's time in the safe.

$500 Shipped to your FFL. Paypal, Zelle, MO.

-5 round aics 308 with area 419 extensions $60 each 2 available

-5 round accurate mag 308 aics $40 *sold*

-12 round Ai br aics mag with someone's 3d printed follower and spacer (worked good) $50 *sold*

-bix n Andy curved triggers 2 available $10

-manners short arca rail $20

-mdt poly 223 aics mags $25 each 2 available *spf*

-grey ops plate bag stop (has been cut shorter) $15

-area 419 weighted arca rail $140 *sold*

-leofoto mini ball heads 3 available $30 each *1 sold 2 still available*

-weatherflow wind meter $40

-area 419 garmin mount $80

-area 419 mag extensions both gold 2 available brand new $30 each *both sold*

All prices are shipped
Payment via PayPal F&f or add 3 percent or venmo

Criterion 22" heavy hybrid barrel, stainless 6.5 Creedmoor 1-8 twist rate
Geissele trigger SD3G
Aero M5 matched receiver set
Aero M5E1 handguard (upper is M5, not M5E1)
Aero BCG
Magpul PRS gen 3 stock
Radian Raptor LT ambi charging handle
VG6 Gamma 6.5 muzzle brake
Aero gas block

Don't know much about it, picked it up from a local auction, but it looks like it's barely been shot - if at all. BCG has minimal wear, brake doesn't have any carbon on it, barrel looks perfect, etc. No idea how it shoots.

$1300 $1200 shipped to your FFL. Paypal, Zelle, MO

Used Bartlein carbon for a impact nbk estimated 300 rounds give or take 50. 5/8-24 muzzle, length in picture. Chambered by blue mountain precision.

$750 shipped
PayPal F&f or add 3 percent or venmo

I was planning on using this as my long range lightweight mountain elk/mule deer rifle, but I honestly bought way too many rifles and some of them have to go to fund other endeavors.


Custom 28 Nosler - built by Sterling Precision (formerly Gunware)

Brand new - Never fired!

26" 1:8" twist Proof Research Carbon Fiber Barrel (never fired)
Defiance Action
Manners stock - bedded to barreled action
3-port self-timing muzzle brake
Bottom metal
Triggertech Special
Everything Cerakoted to match
Total weight - 7.48lbs

$3250 Shipped

Selling off some bullets I decided not to use. All bullets are $65per full box shipped (full box's are closed). I'd prefer if you take both if they are full box's.

-168gr vlds 100 count new box and I'll throw in the partial

-180gr vld should be a full box but I'm not counting them $60 (at absolute most might be 10 gone but it looks full)

-180gr hybrids

-172gr hammer absolute hammers I'll throw in the partial box *sold*

-175gr accubond lr

-166gr a tips *sold*

PayPal F&f or add 3 percent or venmo accepted

Will look at trades of 6bra dies, 243ai dies, 223 dies. (dies must be full length with bushings and micrometer seaters) lapua 6br brass, lapua 6.5 creed brass, alpha 25 creed brass, alpha 6bra brass. Lapua center x 22lr (a minimum of 2000rds please) I will add cash or you can to make trades fair for both parties.

I am looking to trade this Anvil 30 ball head for the old model (Gen 1) that has the non locking release. This is in great condition. Has been used but functions perfectly.

This is made by JA outdoors and Justin from kinport peak rifles helped design this brake. It's a 5 port stainless steel brake with 5/8-24 threads comes with 338 cal.

New $250
Looking for $150 shipped

Up for sale.

This is one of my personal hunting rifles that rarely gets used anymore. Its shoots very well and has always been consistently under .5". I can take it out and shoot a couple groups if asked. Round count on the barrel is 331.

Specs:

• Manners PRS 2 Mini Chassis CIP stock - Elite Tac Scorched Earth
• 
  
• Defiance Deviant Lapua Bolt Face Long Action
• 
  
• 28" Bartlein Heavy Palma Barrel - 9.5 Twist
• 
  
• Timney Calvin Elite Single Stage Trigger
• 
  
• APA Fat Bastard Muzzle Brake
• 
  
• 5-Round CIP mag
• 
  
• Barreled action finished in a custom tinted greenish / brown Cerakote. The bolt has been coated in Cerakote Micro Slick.
• 
  
• Salmon River Solutions ARCA Pic Rail up front.

The rifle has shot 245 Berger EOL's for its entire life with hits out to 2400 yards on steel. I have loaded ammo and brass to include with the sale. Load data for this rifle's pet load shooting the 245's at 2925 FPS will also be provided. The barrel Cerakote has some scratches and minor signs of use but the stock and action are flawless.

The rifle weighs 12lbs 4 oz with an empty mag and no bipod.

Bipod is not included. The rifle is ready to put glass on and shoot. Not looking to separate at this time. Post here and PM if you want it, no trades please.

Asking $2800 shipped for the rifle and all the lapua brass and loaded ammo ( should be around 100 pieces total +/- ).

PICS:

Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media

I have a brand new triggertech special flat shoe rem 700 clone with no bolt release for sale. It's brand new never been fired decided to switch some triggers up.

$200 shipped

Offers welcomed

Can anyone share their personal experience or point me towards and posts/videos going over the Guide 1913 QD mount, specifically for the TB630 (non-LRF)/TB1250? There's a few posts I've seen around on different forums saying the mount isn't good, but not anything specific as to why.

For context on why the TB630: Great price, the dual 18650 batteries, and the high-res AMOLED screen would make a great pairing as a clip-on for my NX8 2.5-20x50 for ranges max out to 500m. I understand the TB650LRF has the 4x bolted in 1913 mount, but I don't really need a LRF and you lose battery life going from 2x to 1x18650 on the LRF model.

Thanks all!

I found you guys from a recommendation from a PRS group on FB..So my daughter started shooting NRL22 this season so we have had a bunch of learning and listening to do as we have never shot precision rifles before..Many years off turkey shoots and plinking,but never to this level..So I am here to pick up some knowledge from you guys and prob some parts as well .We are already down the rabbit hole with this rimfire stuff so we will be around a while .lol

SOLD a Grey Birch 16" Folding La Chassis for a right hand CZ 457. The chassis includes the bag rider sold by Grey Birch and a MDT carbon fiber grip. I'm asking $380 shipped. The chassis also has a thumb rest and a spare mag holder that were 3D printed by a fellow shooter.

Selling a brand new, never fired APC 308 14.5in, it’s been p/w. Price is $2150 shipped, only trades are nice scopes such as ATACR 4-16, Kahles k318i or I can add cash for higher end scopes such as S&B 3-20 or ZCO 420. We can FaceTime to make things easy.

6.5 same barreled action put together by SJA , between 3/400 rounds i need to recount. 20 inch barrel in sendero contour. Still plenty of life left, shoots .5 moa with me behind it , triggertech , solus action. Pretty clean setup, it’s been used but not gouged up or beat to hell. Doesn’t come with optic or cherry bomb. 1600$ shipped overnight / 1500$ picked up local in South Georgia.

Which AR-10 has the least barrel deflection and is considered the best?

Have 2 of these both are brand new. Bought them for the silent night match but I was unable to go. Each one had a red light for the elevation turret and dope card.
$60 shipped ea
Zelle cash app or Apple pay