Just tried to test fit a HUXWRX 5/8x24 direct thread adpter onto my Gen II RPR (in .308). Won't go a half turn. Tried it on my x39 RAR and fits beautifully.

Can't find anything anywhere that indicates the barrel thread should be other than 5/8 x 24.

I've got a note in to Ruger tech support but this is driving me nuts.

Q 5/8” Cherry Bomb muzzle brake, slightly used, $60 shipped. Venmo or Apple Cash accepted. Also can possible meet or pickup near Houston.

I also have a 1/2” Cherry Bomb, if interested in both I’ll take $110 shipped for both 1/2” and 5/8”.

Q Cherry Bomb muzzle brake, 1/2”. Like new, not sure if any rounds were shot with it but if so very few. $60 shipped. Venmo or Apple Cash or pickup possible near Houston.

Shooters,

The March Palo Alto Rimfire PRS Match will be held on Sunday March 23rd. Check-in will start at 7:30am, Safety Meeting at 8:45am, and shooting will begin at 9:00am. Target setup will begin at 6:30am the more helpers the quicker setup goes.

This will be a PRS affiliated match held at Palo Alto Rifle and Pistol Club. If you wish to join PRS you can sign up on the website and your score from the match will be uploaded to the website. Joining PRS is not a requirement. The match fee is $30, and overall 1st, 2nd and 3rd place a trophy.

The match fee will be $30 per shooter.

We are going to use a new website for registering for the match. This website has an App that will allow us to score the match live and will be viewable during the match for any shooters. So please sign up using the link below to impactscoring.net. This month's match consists of 10 stages and 100 shots. This match is open to anyone.

Impact Scoring

The scoring will be recorded on impactscoring.net App. After the match overall places will be announced, trophies for 1st thru 3rd and scores will be uploaded to the PRS website.

Range Address:
1393 Highway 943 North
Donaldsonville, Louisiana 70346


Hope you can make it to the range on the 23rd.

Cody Tudor
Walter Gauthreaux

Having issues with an older AR-10(T). Gun started out as a 24" SS Target Barrel W/Free Float Tubular Handguard. I had a local smith cut the barrel down to 16" and install an Armalite forend (as pictured). I assume the twist rate (unknown) wasn't accommodating to the shorter barrel, as it will not seem to group anything within 6".

With that said, does anyone know of a barrel manufacture that will make a heavy 16" barrel for this pattern rifle and install it? Can I have a new barrel installed WITHOUT having to replace the bolt? Parts for these guns seem to be hard to find.

new boy here,
from "over the pond" I live 10 miles south of York in England,
retired last year, more time to shoot, (we can shoot deer over here 364 days a year, )
yes we have guns over here, nothing like as easy as you guys have it, I have been in Walmart,
I`m currently at 4 rifles and several shotguns,
main deer rifle is a 7mm08 tikka M595 in stainless/black poly stock,
I have a couple of 22rf and a fac airgun for around the farms,

I visited over there a few times usually leave Cabella`s or similar with an extra suitcase of stuff,

any questions? ask away,

Hi folks. I've been considering a TVT QDT for a while and just noticed the new 65mm ball head. Anyone have any reviews of the 65mm ball head and comparison with the 55mm head? The gun is right on the 20lbs mark, so I'm not sure whether the 55mm head would be stable enough. Thanks in advance.

Not a Sniper Rifle but a vintage target rifle. I bought a Pre64 Model 70 from the CMP in 30-338win. I’m finally getting around to reloading for it and am wondering what the twist rate would be. Anyone have any insight on what the AMU would have been running on their match guns back in the day?

Looking to trade for a Voodoo thermal and potentially helmet/mount.

Have the following and can add/subtract for the right deal.

- Vudoo Rifleworks V22 360 w/ZCO 5-27 MPCT2 in Spuhr mount

- S&W Classic 629 Stainless 44 Magnum

- LWRC SMG 45 w/Eotech

- (New) Mad Pig Customs Marlin 1895SS w/Aimpoint Arca

- 1927 Winchester Model 94 Saddle Ring Carbine 32WS Nickel

- Half Face Blades (HFB) One-off Custom Raindrop Damascus Cowboy Tanto. Handle; Bolster blue dyed maple W/resin mix. Blue coral and Colorado elk antler. Split Materials; Coral, Meteorite, Turquoise CF. (Split liners:grey(s), blue). Blue glow in the dark pins. Semi-exposed tang W/rockwork. Filework on spine w/glow in the dark resin.

- HFB Crow Jr. - Silver Dragon Strike carbon, black, red and blue carbon split, mosaic pins, carbon fiber lanyard pin.
- HFB Cavner, Spalted Tamarind with mosaic pins

Very clean Leupold Mark 4 10x scope, mil dot retical. Includes steel Mark 4 rings and Tenebrex caps. These scopes are getting harder to find, I've had in mounted on my .308 and worked well just need something variable power.
$900 shipped
will consider trade for Vortex Razor 1-6

Leupold Gold Ring 12-40x60 spotting scope, non-retical. Includes ARD and cap, cover. Clean and nice condition, haven't used it much.
$900 shipped
Will consider trades/part trade.
looking for 34mm cantilever mount,

I saw a blue ELCAN SpecterDR at an auction, it says SpecterDR by ELCAN SU-230/PVS 5.56 Articulated Telescope 1240-01-533-0939 MFR 36126.

It doesn't match up with anything I've found online so far, and while everything general I've found on SpecterDR models says 1x-4x, on the other side from the above information, this one is marked 1x or 16x.

Could it be some kind of prototype? Or maybe I happened upon something that's only supposed to be known to the Men In Black?

Any information would be appreciated.

NF SHV 4-14x50 with illuminated Mil-R reticle. Some ring marks, no deep scratches or anything, glass looks great. Just a great value do-all scope. I don't currently have the original box, so what you see is what's included. I'll update if I find it. $800 shipped. Happy to provide more pics of needed, just ask.

BSF 14.5” .223 Wylde barrel. Has under 1000 rounds through it and has been pinned previously. Listing for half cost of new and including gas block and tube.

$335 shipped

Almost new press.
Only loaded around 200 rounds.
Comes with the Abor die conversation kit and a Lee bench plate kit.
Long and short handles.
$260 TYD.

All are unused except the G17/22 6004.

1) 6280-174, Sig p229r/229r with offset belt attachment - $45

2) *Used and cut trigger guard* 6004-8312, Glock 17/22 with m3x/m6x light (fits TLR-1 as well) - $30

3) G-Code OSH for 1911 (non rail) with RTI - $45

4) 6005-53, 1911 (non rail) - $25

5) drop thigh rig with quick release- $25

6 ) 6004-283, Glock 19/23 with thigh rig - $50

Prices shipped & insured. Zelle or Venmo only. No trades

Selling a used prefit, originally bought it new for a lightweight hunting rifle, but I made the switch to a 24" barrel.

20" Sendero profile carbon wrapped .308 barrel. 85 rounds by me not including Proof's test fires, as shown in the photo. Grouped .51" @ 100yds with their test loads.

1/10 twist and still very clean.

Looking to get $625 $585 shipped or best offer
sold

Hello, looking for a good bolt action 6.5 Creedmoor to ping steel at 1000-1200 yards. May try PRS in the future, not sure.

Currently looking at the MPA BA PMR PRO II but before I click buy now what else should I consider? I think I heard something about a certain magazine not working on the new ARC action? Is that an issue? Double stack magazines would be preferable.

Is the Delta 5 Pro a contender? Maybe some good barreled action in a MDT chassis? There's so many options out there now I want to make sure I'm not missing anything that I'll figure out after I already have something.

Thanks for any and all opinions. I'll probably go for a Vortex Razor Gen 3 6-36x56, ATACR 7-35x36, Zeiss S3 LRP 6-36x56 or something similar to put on it. Maybe a Kahles K540i if I can find a crazy deal LOL, doubtful.

TriggerTech AR-15 Diamond Curved Trigger - Brand New
Short Two Stage
Traditional Curved
AR0-TRB-14-NNC

$205each shipped or $395 shipped for both

Bobro QD Scope Mount - Standard Single Lever 30mm
$155 Shipped

Leupold VX-6HD CDS ZL3 4-24x52 scope with a TMOA Illuminated reticle and sitting a ARC 34mm rings. $1600 buys it! Located in Laquey, MO
$1500 buys it bare
$1600 buys it with rings
This has the TZL3 Turrets, So please don't send me the cost of the scope with TZL2 turrets saying you can buy it new for $1600. Please do your research! Thanks!!

Custom Leupold VXIII Long Range 4.5-14x50 30mm tube with 1/3 MOA Turret and Custom Grey Bull Precision reticle. $700 buys it!
Price is FIRM!!
Add $125 for Alumina Caps
Add $100 for Percison Seekins 30MM Low rings.

Leupold VX-lll 6.5-20x50 30mm tube Varmint Reticle scope.
Scope and glass is in good shape, works flawlessly.
Was 750 Now $700 buys it bare

Was $875 Now $825 buys it with Alumina Caps

Was $900 Now $850 buys it with Alumina Caps and Burris rings.

Prices are shipped to your door.

Price is Firm!!

Silver Leupold VX-III 6.5-20x50, 30mm tube Long Range scope with Varmint Reticle.
Scope comes with rings and lens covers.
Scope is in great shape with no issues. These scopes are hard to find and sells for 2K on EBay. $1500 buys it
Final Price Drop and it’s big!!-$1200

Been looking at these for a while, anyone have one? Likes, dislikes? Thanks