Only used a few times

450 shipped

Comes with everything from factory
Except usbc cable I will provide a new one though (I think my child stole it lol)

Can include the ad mount for 550

No trades on this one thanks

Have a ~16.7-16.8lb 6.5x47 rifle that I built purely to shoot for fun right now. This is without a bipod. It's probably my favorite rifle to shoot 100-1k yards right now so I don't want to mess with it too much but maybe I'm missing something here.
However, if I were to shoot at an NRL event or two for fun later this year or next, it would be nice if I could come in under the 16lb limit with this particular rifle. If it's not viable with my wants right now though, it's fine - weight limit or no, I was going to shoot skills division anyways. If I REALLY had to go compete today, I would just bring a different rifle.

Obvious answer but don't want to:
6.5x47 26" M24 contour barrel - it barely meets power factor as is when ~55-60F at close to sea level right now (140gr at about 2720-25 right now) so I can't just chop the barrel down. Don't want to spend money on a new lighter contour shorter barrel in a faster cartridge I like less for skills division.

Viable but not enough:
Remove sunshade + wrap on optic - saves 3oz
Full length Arca - MCS rail + arca weights could be swapped for a shorter rail with no weights - save 3.6oz without weights and maybe 1-2oz on a slightly shorter rail or just chopping it down a bit? (Don't want to cut rail too much due to mounting points on stock + rail is already skeletonized anyways to allow for weights to be inserted).
ATS brake - Yes, I could remove this or put on a lighter brake, but I like the way it shoots with the brake right now - saves ~6-8oz removed, 1-2oz swapped

Things that are probably less viable or won't make enough of a difference, but listed anyways in case I'm wrong:
- Manners MCS PRS stock - weight spacer on the butt end of the stock has already been removed - it's just the aluminum rings as spacers, the rubber pad, and the mounting plate for the rubber pad now.
- Leica PRS scope with Hawkins 2pc rings - I suppose I could remove the diving board from the scope rings and save 1oz there? I don't want to switch to a different optic.
- Hawkins M5 DBM, ARC CDG action, BA trigger, dope card, probably 1-2 more very small <1oz parts I'm forgetting. - Doubt there is much weight to be saved here.

Cleaning out the safe.

I will not DM you first, reach out to me first!

($sold + half of shipping) BNIB Aero Solus Action 308 bolt face.

($sold Shipped) BNIB Zeiss LRP S3 6-36 Mil.

($1250 + half of shipping to FFL for full package. $1000 just for barreled action) MPA barreled action. Mpa stamped Curtis Axiom with 7 twist 26 inch barrel chambered in 6mm GT. Include 2 MDT GT 10rd mags, ~300 pieces of 4x fired alpha ocd brass, rcbs matchmaster die set, and a 419 hellfire adapter. Barrel has 1300 rounds on it. Will ship in original case from MPA, I am the original owner. If you put it in a mpa esr chassis it does qualify for production class.

Can seperate barreled action and reloading stuff, won't sell reloading stuff til action is sold.

($1150 Shipped) Manners TCS stock. Has mini chassis. Used for one season, bought off the hide last year. Has all internal rail weights and will come with 2 rear weights so you can tune the weight perfectly.

Will do trades or partial trades for: Terminus Zeus QC, MDT ACC Elite, 25cal Barrel blank from Proof/Kreiger/Bartlein/CRB

Used ZCO for sale in Spuhr QDP 6002 mount (0 mil/0 MOA)

Have all original box, paperwork, OEM caps, but I cannot find the sunshade.

Scope is used with minor scrapes on the bell but outside of that has been well taken care of.

High rez video link showing scope in 360 view available to those interested please send a PM.

$3450 shipped.

Centurion Arms barrel/gas block/bcg - $600 shipped for both

Centurion Arms Mid-length Enhanced Socom barrel w/ tabbed gas block - $330 shipped

Centurion Arms V2 Chrome Sandcutter bcg - $300 shipped

All parts are brand new, never used

Discreet PayPal F&F or Zelle preferred

The Kit V2 with Hog Saddles new Turtle Head 1.4 ball head. Took it out to compare to my RRS and I still like my RRS better. It’s basically brand new. No dings, scratches anything. Everything works like it should. Definitely a tripod setup that works well I just can’t part with my RRS.

$850 OBO

I’m looking to buy HLR Origin .150 Recoil lug? Does anyone have one they’re willing to part with?

Guys a scammer hitting up people who post ill take it in there adds beware! Been reported

I have a Sharps Mountain Tripod Office of some sort. It's brand new unused once. It has a mark on the back from something not noticeable from the front, but So pricing accordingly

$85 shipped.

Sold my SCAR and my 2010 project. Have these left over and I need to clean out my garage.
5 x XM2010 .300 win mag mags. Some wear on them. They all feed fine. 300 OBO for all of them

6 x SCAR 20 mags. For .308/6.5. Brand new still have storage wrapping on them. 250 OBO for all 6

New in the box, bought the scope and want to already up grade. Never been opened and sealed. $1850 shipped

So looks like I have settled on a Terminus Zeus full tenon. Since I’m new to the whole world. I’m looking at prefits. I’ll bet getting a 223 Wylde and 6.5. Anyone in particular want to look at?

Looks like TS and Preferred have been popular.

I learned a lot from the last post I did so figured I would cast my net.

Any recommendations for sourcing en bloc Garand clips for a shooter Garand? Not collecting, this is going to be shot like it was made to.

Very lightly used mk5 3-18. Cch reticle, comes with the caps. I can’t find the box currently. A few spots of safe rash as seen in the pics. No mount. Scope and caps only. If I find the box I’ll send it in the box. $1420 shipped.

Impact 737 - purchased new 200 rnds
Not AW cut

2 benchmark 6gt barrels. 1 NIB, 2nd 200 rnds

$2000 for all. Not ready to split up. The only trade I’m looking for is cash.

Will trade the items below towards some Hornady 6mm ARC 80gr VT, 103gr ELD-X, 105gr BTHP Black, & 108gr ELD Match.

"8" MAGPUL 30RD GEN M3 AK AKM PMAGS - USED - $140 SHIPPED - No pictures but no cracks/scrapes/dents/no drills/no drops/no mud/etc. Maybe ran them all 5 times total. OEM picture below to indicate metal lug and spine for the Gen 3.

Mk5 Hd 7-35 pr2 mil reticle in like new condition just got it back from leupold after a tracking issue and they basically replaced the scope, just have enough scopes at the moment. Will come with sunshade and throw lever screw asking $1600 shipped

$875 - Paypal, Venmo, Zelle

Located in Tucson, but will ship FFL to FFL

Less than 50 rounds through it

It's the most recent version and purchased directly through Glock. It has the new/matte finish

Holosun EPS Carry Optic - Green (Mounted directly to the slide, no adapter plates)

Night Fision Optics Ready Stealth Series Backup Iron Sights

Talon Grips - Pro Texture

Streamlight TLR-7X Sub

T-Rex Arms Appendix Carry Holster with Soft Backer

Also comes with 2 Factory Glock Magazines

Used but works well.

Excellent condition - Vortex Fury HD 5000 LRF binos, comes with box and all accessories.This is Not the AB version. I used these for a few months while I had some other binos in for service. One of the best rangefinders that I've used. Ranged no problem out to 2000 yards.
Great Glass, no damage, and of course full vortex warranty for any owner.
$700 shipped CONUS, Buyer pays any transaction fees.

The Dynamic Carbine Course is designed to train participants in rapid engagements, covering distances from 5 to 200 yards. Students will develop the skills to seamlessly transition from rapid, close-quarter engagements to effectively establishing positions for engaging longer-range targets up to 200 yards. This course enhances fundamental carbine techniques while emphasizing the critical mental adaptability required to switch between the two engagement methods.

Time & Location​

Jun 14, 2025, 8:00 AM – 5:00 PM
Sanford, NC, USA

I have 6 pair of the 12X DMR Vector-X for sale

Message me if you'd like a pair. Payment and pricing

These are from my Preorder I had on here.

These are ready to ship to you now !!!

Thanks Scott

What's been your experience with this? Different experiences with 130 v.s 140 class projectiles?

Thanks in Advance

New
$30 shipped

I have 2 10rd MDT AICS 6BR/6 dasher for sale

Used for 200 rds each

They work great I just use my gray ops more.

$140 shipped.

PayPal G&S I'll cover the fees. No Notes!

Will trade for 1 gray ops 12 6 Dasher mag