You may have read my other Thread looking for the best place to have several of my suppressors modified to HUB mount capability.

Well, one of my suppressors is an AAC 762 SDN-6 and I have noticed that AAC offers this service and more for my suppressor....more meaning that they say it will be shorter, lighter, less blowback, and 300WM rated!!! Seems great...but is it $700 great???

I am curious if anyone has had this work done by AAC and can provide feedback?

So now that ECCO Machine is no longer a source for modify suppressors to HUB mount, WHO is the Current Best source for having this work done?

I did just reach out to a guy that used Thundercans/Shaw and could only speak to the appearance of their work. His reply of, "they look fairly decent" was not very inspiring, lol. And it may be a week or two till I hear from him regarding range time.

I have this 500 count of alpha 6.5 creed srp brass I’d like to sell for 590TYD or trade for the like 22 creed srp or 6 Dasher srp brass….

Used in good condition Nightforce ATACR Mil-XT 7-35.

Comes with shade. No box

$2650 shipped lower 48

This is the exact package I am selling: https://www.atlastargetworks.com/co.../products/know-your-limits-kyl-target-rimfire

Used 3 range sessions. It's just more than I want to pack/unpack and ends up taking up space.

PayPal friends and family with no note for payment, shipped usps priority insured for amount paid.

$150.00

March F 3-24x42 FFP Tactical with Illumination and FMA-1 MOA reticle. This scope is in good condition with some minor cosmetic wear. Glass is clean. Comes with scope and bikini covers only.

Model is D24V42FIMA

$1,900 $1,700 $1,500 shipped and insured.
PayPal F&F, Venmo, or Zelle

March FX High Master FFP 5-42x56 scope with FML-TR1 MRAD tree reticle. I purchased this unit from Optics Planet in 2021. The scope is in great shape and was only used a few times. Comes with original flip caps and scope only.

It is the wide angle eye piece model: D42HV56WFIML-FML-TR1

$2,500 shipped and insured.
PayPal F&F, Venmo, or Zelle

KAC Flash Eleminator off of a new SR-15. $100 shipped via FedEx. Payment via Apple Cash or Venmo.

Up for grabs is a used pair of Revic BLR10B's. These were a display item at our shop and used at an NRL Hunter match.

These are in good condition. No major scuffs or issues. The glass does have some surface scratches if looking in the right light.

Price: $1,650 shipped

Hi all...

Looking at doing two builds, the one will be barreled action into a chassis...

2nd will jsut be a barrelled action.

1 x 300 PRC and
1 x .375CT

BAT and either bartlein or Krieger.

Looking for recommendations of gunsmiths with reputation of building pin hole shooting rifles.

G

Brand New Hornady Iron Press Kit With Auto Prime ......This is the Full Kit not Just the Press ......Cheapest I've seen online is 650ish ........... sold Shipped .........

Free Shipping

$2850
$2700

Excellent Condition

Turrets and Illumination work flawlessly

Glass is clear

Model C571

Original Box

Call, Text or Video Chat

*item in hand, be careful out there

(910) 224-8279

Atlas Cal Gen 2 BT65
A419 ARCA Clamp
A419 Spigot Extension
A419 Baricade Stop

Minor salt, visible in pictures. Functions fine.

SOLD shipped, PP F&F, Venmo, Zelle

Looking for a carbon fiber bighorn tL3 prefit in 6.5 cm

6.5cm needs to be 24 inch minimum

Let me know. Thanks!

Looking for something lighter for my kid to handle. Hard to handle a 15 lb rifle and a 10 lb heavy fill bag. Looking for something like a Schmedium lite fill or fortune cookie. Thanks!

Less than 20 rounds on it

$8500 shipped

No trades

Hey guys, first post here. I just purchased a GA Precision M24 off of gun broker (and a 0 MOA MARS rail from the same shop). The gun is still in transit and I just want to sanity check a few things in regards to scope mounting. First off, the MARS rail did not ship with screws which I think will be problematic. I'm hoping I can just have some screws made at a shop near me. Or maybe someone knows of a website that still has them? What size screws will I need? I've also seen a post where someone mentioned having to tap the action to accept the MARS rail screws and MARS rail. Is that accurate? I just refuse to believe they sent the army a rail that required modification on the action holes but anything is possible.

Next, I wanted to purchase a scope with similar(ish) size to the Leupold M3a. I ended up going with a Leupold Mark 5HD 3.6-18x44 (a bit bigger than the original M3a scope but I wanted some newer tech to go with it). Assuming I can make the MARS rail work, what height rings will be the lowest I can go? I will probably just wait for the gun to get in before I pick rings at my LGS but if someone has a similar setup I'd love to see it.

Lastly, If I cant immediately get the MARS rail mounted up, will a standard long action Remington 700 Scope base fit onto the m24 action? I'm assuming so but I haven't been able to confirm that on the internet. Thank you guys!

For Sale, New in Box, Arken EP-5 5x25 FFP scope with MIL reticle.

400$ shipped to your door, lower 48.

PayPal F&F or Venmo.

Hi all, i’m a rifle builder from the UK and i’ve been tasked with adding the clip/lug slot features and thumb slot on some E serial number actions. I’m not sure how accurate the builds will be but i’d like to get my part as accurate as possible.

I’ve been reading a lot of great information on SH but i can’t quite find what i need. As i understand it the original M40A1’s were retrofits from M40’s, and these actions had the true clip slot and double radius thumb slot of the 40X and machined by Remington. I have a technical drawing for this and it has enough details to get fairly close.

Then it appears any later supplied actions were machined in-house by the USMC. And these were machined with a simpler “lug slot” and single radius thumb slot. I can’t seem to find any drawings or technical specs for these features. If you look at the attached images i found on google it appears official drawings do exist and i wondered if anybody had a copy they would share? Or at least share specifications so i can get it close. Unfortunately in the UK there is little information.

Any help or input is greatly appreciated.

I’ve got two boxes of Berger bullets I’m not going use anytime in the near future so let’s sell them or trade them for something else.

I’ve got one full box of 100 of 168 hybrid and a partial box of the 185 juggernauts. 62 bullets in there.

$75 shipped OBO. Most electronic payments accepted.

Trade for equal amount of:

6mm
Berger 105 hybrid
Berger 108 BT
Sierra 107 SMK

.22

Berger 73 BT
Berger 77 OTM

BNIB

Hornady Auto Charge Pro​

300 shipped

6mm Without Warning TMB Tuner Muzzle Brake

$185 shipped

As the title would seem to indicate… I need a 9mm piston and 3-lug adapter for a Rugged Obsidian 45 can.

Cash or trade.

I have things. Strange and wonderful things. Things that defy the laws of nature and physics. Things that will make you irresistibly attractive to the same sex. Things that even @Dirty D has never jammed up his butt.

500 Pieces of once fired 6.5 PRC Norma Brass. $65 shipped per 100 pieces.

I'm tired of fighting my gear. I have a CZ 455 with the factory American barrel which I had cut to 16.5". It's fine for hunting, but the balance point is unacceptable for PRS.

I'm thinking about getting the B14R Heavy, but I'm skeptical it's going to balance without external weights.

The other option would be to find a heavy prefit for the 455 (leaning towards Lilja or L3i) and if I like the setup then I'll get the cheapest 457 I can find, then build a competition rig off that action.

Lastly, the nuclear option, is just go Vudoo or RimX. I'm hesitant because I don't want to chase feeding issues and magazine prices are stupid.