Found out today my dad who is 72 is going to have his shoulder replaced. I know he has had surgery on both already. He is bad about doing the PT after. Any advice for him or me? He has 6 grandkids hopefully being able to do stuff with them will be motivation to do the PT. I can always yell at him. @powdahound76 can come do some KS deer hunting and yell at him too.

I finally broke down and picked up one of these. So far, it's shooting well and I'm not regretting it...I'm not retiring any of my other rimfires, but I am happy with the way it's performing.

I do need to add a few items to the chassis to help when shooting comps.

For anyone who has one, are you using a thumb shelf? If so, which one?

Also, I've debated picking up the AI Bridge, but I would love some firsthand experience from anyone using one.

The last item I am trying to decide on is a rear bag rider. Is there a preferred model, or should one be used that is made for any other AI?

Thanks in advance!

Cleaning off the bench. Post what you want and then PM me or just PM directly so no scammers try to reach out to you.

1) magpul str stock mil spec - $50 shipped
2) vltor emod mil apex - $90 shipped
3) Spuhr SP-5002 35mm 1.5” - $310 shipped - SPF
4) tacticon flip to the side mag - $50 shipped
5) sig Romeo 5. No box, low mount only - $75 shipped
6) ARMS 34mm 1.5” QD rings - $150 shipped
7) discoveryopt 34mm 1.25” rings - $30 shipped
8) MDT 34mm rings 1” height - $100 shipped
9) badger condition 1 FDE 30mm unimount. I can remove the paint if desired. 20MOA - $210 shipped
10) AAC brakeout 51T 5/8x24 30 cal NIB - $90 shipped
11) 419 hellfire 2 port 5/8x24 6mm brake. Lightly used - $100 shipped - SPF
12) APA micro bastard 1/2x28 - $110 shipped
13) dead air keymo 1/2x28 - $55 shipped

If you can let me know what the other muzzle device is I will get a price on it.

Brand new, never fired. Original Box not included, rifle only. Threaded barrel, 5 round mag, TriggerTech Field trigger. I added a Bergara 20 MOA scope rail.

Ship to FFL only. PM me directly - I will not contact you, you must contact me. Can FaceTime if requested.

$1,700 $1,600 $1,550 $1,500 shipped from me to your FFL, or located in Texas near Corpus Crusty if in-person pickup is desired.

Potential trade for optic: S&B, Kahles, NF, etc. (plus or minus cash).

PP F&F
Venmo
CashApp
Cash in-person

*NOTE: It is the buyer's sole responsibility to know your state and local laws.*

I’m selling a level I no longer use. Flatline Ops Articulating Accu/Level 34mm tube with fine adjustment. $150 Shipped!

All factory and either lightly used or new. Not looking to separate as I have no use for them anymore.

$200 shipped for all 6. Know your local/state laws please.

Some time back I bought a Monstrum / Amazon mount to try, proof of concept kind of thing. Better to spend $30 to find out it doesn't work than $200.





When I got it I was actually surprised with the quality. Moderately okay? At least the machining anyway. The screws on the other hand are crap and sort of roughly the right size for the tapped holes. I'm using it in a non traditional way on a rifle with decent recoil, so I have no faith in it holding up. I need zero MOA because I'm actually using it backwards, to set the scope rearward.

So I'm wondering if there's anything out of of GOOD quality, that's equally as low. Anyone know of anything off hand?

Burris XTR II 4-20x50 with SCR reticle (not illuminated). $425 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-Adjustable A2 Buttplate
-Surefire Picatinny Mounts
-13.5”-15” Tabbed Geissele Rail
-Larue LT788
-Premium 18" AR15 Barrel

Used MDT ACC Premier Gen1, Rem700 sa footprint in FDR with bag rider, thumb rest and SAC match saver. It is missing on of the butt pad lock thumb screws. Asking $670 shipped - SPF

A buddy was in Gulf war one and is now in law enforcement.

He has flashbacks whenever someone says "thank you for your service"

He says he always thinks about rubbing one out in a porta potty in Kuwait to a very used and abused magazine when he hears the phrase.


What runs through your mind?

I just bought a 2021 charger and to say they get stolen a lot is an understatement. Does anyone have any first hand experience with "car alarms" for newer cars?

Do they all come with GPS modules now? Does that mean a subscription for service??

Thanks

Good afternoon folks,

I know a bunch of you have super nice cars.

What are you using for "wax"?
Are the ceramic coatings worth the money?
Is there a ceramic product folks would suggest?

I will post pics of the car when it gets here. Fwiw, it's maroon, so a darker color.

Has anyone ever used this brass? It's older Herters white and red box brass that says made in Finland (white box) made in Sweden (red box) Would I be right to assume the white box were made by Sako or Lapua? Are they of high quality? I have the opportunity to pick up 3 virgin boxes and the brass looks decent. He also has 5 boxes of the red box, so Im also assuming thats made by Norma? Which would you grab given the opportunity? Or would you just go with starline or winchester?

I was born in 85' never even heard of Herters...

Sightron Siii 10-50x60
MOA-2 reticle
seekins extra high rings
Bubble level
Scope sock

$800

I used this for years and years until I went to a RCBS and then FX, but I always kept it around because it was old faithful. I’d say if you’re looking for an auto charge that throws within .1-.2gr every time then this works great. I used it for stuff that didn’t really matter like 357, cheap 308, etc.

Comes with the charge, cord, and factory box.

$125 shipped

SOLD!!


Lightly used RRS Anvil-30 on an Outdoorsmans GEN2 carbon tripod center post. Excellent condition, just tiny wear on the jaws.

$350 shipped. I can take Paypal or Zelle.

I put this together around the start of the pandemic lockdown a few years back, and I am ashamed to admit it's only had ~1000rds through it (as that's around the same time I got deep into bolt-guns). This deserves a better home and belongs with someone who'll really use it. This beast is a blast and runs like a watch.

CZ Shadow 2 OR 9x19

Full Cajun Gun Works race trigger (it has everything except for the shortened DA reach, which I didn't need/want). Its trigger is a thing of beauty with a smooth ~5lb DA stroke like a nice revolver and a 1911-like crisp ~2lb SA that's as nice or nicer than any other Shadow variant I've ever handled (and I've handled more than a few nice ones). Short-reset disconnector for super-short trigger-reset and very little take-up in SA (ala 1911).

Brass LOK grips factory cerakoted black.

13lb hammer spring and extended firing pin installed (with other hammer spring weights included), 11lb recoil spring installed (13lb factory also).

Has the "thick" CZ-97-style trigger installed (same as the old 85 Combat trigger without the overtravel screw that always moves and messes you up at the worst time).

Dawson partridge-style plain-black iron sight up front, useful without ever being distracting (new Dawson FO sight included also).

12 mags. Grams springs/followers in the extended mags for reliable 23+1 in the 6 factory nickel mags with Taran Tactical basepads. 6 factory/Mec-Gar mags with Patriot Defence basepads.

Trijicon SRO 5.0 MOA dot.

Shooters Connection competition inner/outer belt with Ben Stoeger BOSS drop and Comp-Tac holster, 5 CR Speed universal/configurable mag holders. The outer belt is size XL and the inner belt is a huge 50 that can be cut down easily (I know I have a smaller ~36 one too somewhere that I'll look for).

All stock parts (minus the standard/stock firing pin, which I misplaced somehow). All misc holster and mag holder hardware.

Spare OEM slide-stop and spare TRS included (it’s recommended to change these out at ~12k rounds, consider it your first change of tires on the house). CHPW plate installed, hard to track down OEM CZ-UB steel SRO/RMR plate included just in case.

IDK how much I have into this, but I know it's a hell of a lot more than I'm asking... so no haggling, thanks.

Be sure your FFL can receive from private party(s), as this has to ship to an FFL. Out-of-state buyers still have to have a private transfer done.

FTF is available in TN in the Nashville area (TN HCP preferred).

$2000 shipped CONUS, firm. Payment via Zelle. DM any questions. No trades (but if you have a Gibson Les Paul Custom in very good condition, we can talk lol). I’m not splitting this stuff up at this point, I want to sell the whole kit as-is thanks.

I’m sure some of you guys know about this or saw this. I just saw it.
Login to view embedded media
Did some reloading numbers to get data too and it was pretty impressive for free info.

Sig 365 XL 12rd magazines. All brand new and a total of 12 magazines.
$28 each shipped with a 2 magazine minimum because of shipping cost

8 left currently

or $25 each if you buy all of them.

PayPal FF, Venmo or Zelle

LNIB S&W 25-15 Classic in 45 Long Colt. 6.5" barrel. Test fired only. Comes with everything it did when new.

$975 shipped from my FFL to your FFL. Insurance extra.

NOTE: It is the buyer's sole responsibility to know your state and local laws.

Please PM me directly to minimize scammers.

Hey guys, I’m using a xl650 and set of LEE 224 Valkyrie factory dies, and I have the sizing/decaping die screwed all the way to the shelf plate and it will not bump the shoulder back at all to where it passes in a headspace gauge.
So there’s no more adjustment in the dye and it won’t go through headspace cage I’ll attach a picture for reference.
am I missing something obvious?

I haven’t annealed them yet, I guess this could be the problem but it would be nice to be able to control the shoulder bump a little more if needed.

Does anyone know much about the 9.3x62? I'm wondering how it does in shorter barrels, down to 16". I can't find much info on velocity data. Thanks.

As the title states.
Price drop: $250 shipped

Frame only, no fcu, no slide assembly, no holster.

Mpa brass catcher, $75 shipped

Bushnell HDMRii 3.5-21x50
FFP, MRAD
H59 reticle
Hawkins rings with diving board
Caps and level included

$800

Rifle not included. Scope only.