this is a never used ADM Low T2 mount (Item No: AD-T1-L-STD)

Comes with Vibratight and screws and mount

asking $75 shipped OBO

Time to change the batteries and these little screws are being stubborn. Was thinking about applying some heat with a solder iron or throwing the in deep freeze for a bit but didn’t want to damage any electronics.

Thanks in advance for any help.

Another long shot here.
Looking for a TCS Max Rimfire with the dual m-loks.

For sale is an excellent condition LMT MARS-LS Lower.

Comes with geissele Flat Trigger
Comes with geissele H3 Buffer
Comes wht SBA3 pistol brace
Radian Ambi Talon Safety Selector

*this item was registered NFA as a SBR. I have removed it from the NFA (i have the paperwork showing the removal).
* this is just a lower now
My trust name was engraved and has been "x" out (see photos)

Asking $850 OBO shipped from me to your FFL. If your FFL requires it from an FFL then add $40 to the price.

6.5 SAUM

• BAT Bumblebee Short Action (mag bolt)
• Extra 308 bolt and bolt tool
• Hawkins hunter bottom metal w/ hunter magazine
• Manners LRH black/blue high gloss, front arca rail
• 24” Rock Creek Carbon Barrel 1:8 Twist
• AREA419 Hellfire muzzle break
• TriggerTech Diamond Pro Curve
• 42 rds loaded 140 hybrids (3050fps)
• 50 brand new pieces ADG brass
• Redding type s match dies and custom Whidden Gun Works Fl sizing die

347 rds on the rifle
Weight: 7lbs 6oz
(Scope, rings, and bipod not included)

$OLD Shipped

Never used or hunted, re-purposed the rifle so this is no longer needed.
Left side flush cups
Proof Sendero contour
Rem 700 Inlet
Comes with 3.100" COAL 3B Bainey box bottom metal, will also accept Unkown Munitions XL SA standard DBM for 3.150" COAL.

Bedded by LRI for Defiance Anti-X. It's also a perfect fit on my Lone Peak Razor Ti and Terminus Apollo Lite Ti. $700 shipped

Got my new Defiance Classic build back from @Deep South Tactical and David did a hell of a job. 20” 1-10 twist Proof Carbon, Triggertech, AG Composites Alpine Hunter stock, Hawkins Bottom metal and topped with Mark 5 HD. Got a BT65 on the way. Had all metal coated by Birdsong in Tac-Ops green. Now gotta find some damn Alpha Brass!!! LOL
View attachment IMG_3816.jpeg

I'm working up an elr load and possibly a long range hunting load. It's a 28in 300norma shooting the 225gr eldm. The barrel is fast, brass and powder are allowing for a very good load at approx 3100fps. I know it's not necessary, let's not debate that. The question on hand is whether or not the 225 will survive at that speed. I've personally seen the 230gr atip come apart at at far less speed, so I'm wary. I want the performance that the cartridge is capable of, and that bullet gives it at that speed. Has anyone run the 225 that fast for long?

Looking to sell or trade off my AX package.
Specifically looking to trade for a AIMC with SFP bolts. Will be running custom barrels. This takes the plentiful M27 barrels that are always listed for cheap.


AI AX308 rifle. Rifle was purchased from second owner. Round count on oem barrel was 330. Rifle is oem FDE.


It includes:
RRS SOAR
Arca integrated AI 16” MLOK rail 20moa built in
2x oem correct mags (not AW mags)
20” AI Bartline 6.5 creed barrel (400 rounds)
26” AI Bartline 6 creed (330 rounds)
Stock pack



Price is $6499.99 plus shipping

Or trade for AIMC rifle with extra bolts and mags. I’ll be getting custom barrels. No parting out, no other trades.

ZCO is NOT included

Looking to trade for an AT-XC plus cash. Can't kick my AI addiction.
Terminus Apollo Lite action. Rifle shoots typical GAP sub 3/4 MOA...even with factory Hornady. Comes with Manners mini chassis and action is fully bedded. Has 200 rounds of Berger ammo through it. TBAC CB brake is perfectly timed without shims.

Bottom metal is Hawkins Hunter
Trigger was upgraded to a Trigger Tech Diamond 2-stage.
Bipod, scope rings and suppressor not included.

This rifle is an upgraded version of the GAP Ridge to Ridge rifle and has the 3/8 MOA guarantee...which it does with Berger ammunition. https://www.gaprecision.net/ridge-to-ridge-rifle.html

Would sell for $5500 shipped. Will consider partial trade like ZCO or Zeiss glass.

11lbs without suppressor. Just under 12lbs with suppressor and TBAC cover.

ZHD520 - ZULUS HD 5-20X Digital Night Vision Scope - Brand New *PRICED TO SELL*​

New Never mounted.

$SOLD shipped lower 48.
Zelle preferred for payment.

This is not the ZHD520R model.

Since 2006 when I returned Stateside from my first deployment I have been working with Compass Lake Engineering building some of the finest Barrels that I've ever had the privileged to own.

For the first few years I mostly dealt directly with Frank White, once I started ordering more one off specialty barrels Frank put me in touch with his head Barrel Smith Paul Ross.

For the first five years Paul cut his teeth under the instruction of Frank White and fast became the Head Barrel Smith behind the scene of CLE, which resulted in a well served 20-year Tenure with CLE.

CLE has since closed thier doors but Paul Ross continues to strive for perfection with his new Company ROSS PRECISION MACHINE.
Paul offers a Multitude of separate services other than Gas Gun Barrels under his new Company, He has since branched out to Custom Bolt Gun Services as well and to no surprise his quality of work always supersedes his customers expectations.

Below you'll see a multitude of Small and Large Frame Gas Rifles Photos, this is a very, very short list of Custom Barrels that Paul has turned for me producing True Sub Half MOA Gas Guns.

MK12 Hybrid Bartlein 6.5 Grendel



20" Kreiger .223 SPR



18" Bartlein SPR



16" Kreiger Recce




First Seekins SP10 Custom Build with my 22" Bartlein 6.5CM barrel Design.



Several Custom JP PRS Rifles both Small and Large Frame all with 20"-24" Bartlein Barrel in .223 .308, 6MM and 6.5CM.






Custom Mega Build with 20" Bartlein.



Current Seekins SP10 Build with my 22" Bartlein Barrel Design.



Seekins Small frame .223



And a Countless list stemming back 15 years of LaRue uppers that I've rebelled, all with Paul Ross Custom Barrels.



https://www.snipershide.com/shootin...larues-large-frame-review-part-1-obr.7213077/

https://www.snipershide.com/shootin...s-large-frame-review-part-2-fde-ptar.7213151/

https://www.snipershide.com/shootin...ch-barrel-predatobr-complete-05may24.7213287/

There have been countless Snipershide Members that I have either personally built custom uppers for or have put them in contact with Paul Ross who has used the same successfully designs that Paul and I have Achieved over the years and have all been extremely satisfied with the quality of his services, if you're one of those members please feel free to post your stories in here.

Every Barrel that I've designed or ordered from Paul has been 1/2 MOA or less, but when working with Paul it's much more than just receiving a quality product, his Custom Service is second to none and he never shies away from a challenge.

[email protected]

Paul Ross Shop Phone
1-850-928-4300

Jake.

Nice Manners MSC-TCS stock PRS-TCS chassis in Elite High Gloss High Plains camo. Has Area 419 extended rail... Stock is in very nice shape expect for a little wear on bottom of butt pad as shown in picture. I bought the stock here, but ended up going a different route and never used it. Inlet for Rem Clone

$1250 shipped US..

[email protected]

Brand new. Just tried out in the house a bit. I did take original tab off which is included and made a paracord pull for it which I think is a huge improvement but the original is fine if you want to switch back. With adm qd arca mount. $390 shipped

Login to view embedded media

Brand new, one of the limited run, polished rainbow pvd CHAD. .264 /6.5 mm size, no tuner.

Never used. Sticking with my maverick.

$575 tyd


Will post pics tonight.

PA Gen 1 5x Prism with the ever reliable ACSS .556/308 Reticle with built in ranging system and wind holds.

She’s used for sure and has wear and tear you can see in the pics but the glass is pristine and the illuminated reticle is solid.

The gen 1 started it all and the 5x is the Goldilocks of magnification.

$165 obo Shipped. Zelle please and thanks for looking.

looks like RFK is struggling with some things. i am now officially confused about what he is up to. allowing the push of a "new" death shot on 6 yos? disappointing in the dealing with CDC. and no arrests or executions?

Put a new CZ457 together with a Brux barrel and MDT chassis. Been going through different ammo to get a feel for what it liked. It seems to really like the Eley Match so I ordered 8 lots. All of them overall shot really good but found one lot that shot exceptionally well with a velocity range I liked with low SD’s.
So I ordered 3000 of said lot and when it comes in I go to shooting it. Shoots really well but here’s the odd part. It’s actually two different lots. The lot I tested and part of the lot I ordered match up perfectly. Average velocity of 1091fps and SD 4-5. The second lot within this lot has an average velocity of 1111fps with an SD of 6. So far I’ve tested 18 boxes and they two lots are about 50/50. You can test a box and the whole box will be one or the other with SD’s being right at what I posted above. I’ve been in the competitive 22 for a long time and I’ve seen a lot of things but never anything like this. Not going to be that big of a deal but will have to go through every box and chrono and mark that box as one or the either.

The Proof Elevation MTR 2.0 (Mountain Tactical Rifle) is a premium, lightweight tactical rifle. She has a 20 inch carbon wrapped Proof barrel, a lightweight carbon fiber stock, Zermatt Arms Origin action, a TriggerTech SS trigger as well as 1 x 10 rnd magazine (DBM).

- Added and included are both a 3 & 10 inch JP Arca rail ($150 value) and a 223 Little Bastard brake ($140 value).
- The cheekriser is velcro'd onto the stock. No modifications are made to the stock.
- She weights 10 lbs and 3 oz with the ATACR 4-16, ARC rings and the TBac biod (as pictured)
- She has a little under 300 rounds on her.
- Scope and rings not included and only for sale to buyer of rifle.
- TBac bipod not for sale.

Proof Elevation MTR 2.0 (223) as listed and shipped to your FFL: $2650
ARC rings & ATACR 4-16x42mm Mil-XT (C615) for an additional: $2349

Trades: Lone peak Fuzion or possibly GAP Tempest. Nothing else at this time.



Please don't hesitate to ask of you have any questions.
Thank you for looking.

NOTE: I will never initiate a PM asking for payment. You contact me.

Hawkins short action M5 DBM. Used, really good shape. No action screws. $140 shipped.

This is a mint, unfired since the factory test fire, HK91 with original styrofoam box and all accessories. This can be verified by Dakota Tactical. 6,000.00 OBO

I read this Eleanor Roosevelt quote today and it really struck me.

"Lest I continue in my complacent way, Help me to remember that somewhere out there, a soldier died for me today. As long as there be war, I then must ask and answer: Am I worth dying for?".

I have a green Bartlein Carbon fiber rimfire blank, $775 shipped.

(SOLD) Like new AGM StingIR 640 Thermal. This can be used a scope, clip-on, helmet mounted, or handheld. The unit is in perfect condition and barely used. 3,000 shipped, OBO.
Happy to answer any thermal questions.

Goal: Convert folding skins from non - thumbhole to thumbhole stock versions

Problem: Lefties are discriminated against, so very horribly

1. Although part numbers do exist for lefty folding thumbhole stocks, they’re rather rare.

2. Lefty folders have the spigot window cut rather sloppily, which is NOT the case with right - handed folders (discrimination!); see the pear - shaped spigot window below.



They USED TO plug the holes before drilling the spigot windows for lefties, see below. This is how my folding non - thumbhole lefty stock came from the factory. As you can see in the green thumbhole stock above, they now appear to be cutting corners.



3. All stocks are fixed by default, with a) plugs installed to cover up the appropriate sides and b) certain sections drilled through and cut off.



4. The best option that covers both right or left handed folders is to buy the fixed, non - folding thumbhole stock in the desired color.

5. Crazy glue the plug to the appropriate side and drill through using a step drill, thereby preventing the ugly pear - shaped hole. If one examines a regular right - handed folding thumbhole stock, it’s evident that this is what the factory does. Look at the plug that was affixed and melted through (?) below.



Pictured below is my lefty after gluing the plug in, and drilling the spigot window (the section blocking the hinge was also cut off, see 6.).




6. Use a hacksaw and cut off the scored “non - folding section” pictured in 3.

7. Finish off cut with sandpaper.

It’s actually quite easy to make the job appear “factory.”

@Mile High Shooting