Long shot but looking for a shouldered prefit. CF or SS. Can be for Origin, TL3, or Solus.

Prefer not to go the Savage Small Shank barrel nut route.

Thanks for looking.

Brand new 3eir Vulcan for Surefire 300/600. This thing actually kinda fucks, will get you out to 5-600yds. I just want more umph…

$315 shipped. Zelle/venmo

I have a lightly used Microtech MSI Ram-Lok with FDE polymer scales and FDE Cerakote partial serrated M390 blade. Comes in box with paperwork. Was carried a few times but only used to cut paper. Still factory sharp. Slight mark on the pocket clip from carry.

Asking $135 shipped

PayPal FF, Venmo or Zelle for payment

I have a Microtech Ultratech LEO model with stonewashed, partial serrated Tanto blade in Elmax steel. The LEO model has the blue show scale and black back. Fires hard and blade is sharp. Carried a bit but not used to cut much. There are wear spots on the handle edges that are consistent with carry. See pics. Comes in box with paperwork.

Asking $175 shipped

PayPal FF, Venmo or Zelle for payment

I’ve got both powders and plan on loading 107 sierra’s when my 13.9” gets here. Assuming they shoot well, which powder would give more speed?

2600x CCI Small Rifle Primers, #400. $220 total, Pick-up in Bay area.

For sale 2 Krieger 1:10 twist .308, 4 groove, #17HV contour, 29” blanks

$380.00 shipped per or $730.00 shipped for both

I picked up several barrel blanks from an estate sale. Most were match barrels from years back, and most were Douglas. This one didn’t have any identification that I could see. Any chance someone recognized the maker? It’s a 26” stainless .308 barrel, 10 twist. I know it’s not much to go on, but somebody might know what it is.

Does anyone use the boretech action cleaning tool kit who has a zermatt arms origin action? I'm wondering if the molded rubber wiper would break or damage the control feed extractor, especially when pulling it back out since the extractor will catch? Also what size brush do you use to clean your 6.5cm chamber? I really like the boretech idea of cleaning the raceway as well as the recessed lug area with the molded rubber wiper but don't want to spend 75 bucks when it won't work with the controlled feed extractor. Any chamber and lug area cleaning tips would be greatly appreciated. Hope you all had a good Christmas amd new years and got in some shooting.

Selling some 6.5 projectiles
188 140 grain eld match
60 130 grain Nosler RDF's
90 Sierra 142's

Would like to sell together

Asking $110 shipped for all

Mounted on a stock and never got around to building a tikka. Bolts up to a ctr stock.

$60 shipped

I have an excellent shape MPA BA 34mm mount in 1.125” height for sale. Asking $200 shipped to lower 48. Check, money order or PayPal F&F for payments. PM any questions.

Green, good condition, had it on a 22 for a while.

400 tyd. Zelle/venmo F&F or MO.

Have three Benchmark 30 caliber, 5 groove, fluted, barrel blanks.
All will finish 26 to 27".

SOLD Two - 1-10tw, standard palma contour

AVAILABLE One - 1-11tw, lite palma contour

Asking $575 shipped per blank.

ALL SOLD

So the time has come to SBR the APC9SD and I am pondering stocks. Well, not really. What I want to accomplish is to use a Gen 1 style butt plate. Taller with the mounting ears more centered in the plate. At some point B&T revised the plate to a much smaller and lower slung version but didn't update any pictures on pretty much any website you can find so it's a crap shoot whether you will get the Gen 1 or a newer version that doesn't really vibe with the gun. At this point an idea entered my head. What about an APC556/300/308 butt plate? They still rock the Gen 1 look and are actually available (and that is all I need. Already have the tele and buffer and it came with the rifle length stops). Seems workable but will it fit on the rails width wise? My heart says yes but I figured if someone had emperical data that would be awesome! What say y'all? Worst case the Haga Defense plate is a pretty decent clone but I would rather sstay B&T through and through. Petty, I know.

I have a 36 mm spuhr mount sp-6001 0moa. This mount comes with data card Holder And small picatinny rail.

300$ shipped

It's colder than a brass toilet seat in Siberia.

Let's hear them.

Built this about 6 months ago, because I hadn’t owned a 308 in close to 10 years. Has 420 rounds on the barreled action. I bought it with 400 and I put 20 rds on it and couldn’t give 2 shits less about 308, still. The chassis is mint and only has the 20 rds on it.

- Lone Peak Fuzion SA
- Bartlein 16” M24 1/10T .308 WIN chambered and threaded 5/8x24 by Stuteville Precision (barrel is an impact 737r prefit)
- AI AX 700 short action chassis
- Area 419 full length Arca
- Anarchy outdoors thumb rest
- Factory bergara trigger (robbed the TT for a different stick)

Action - SOLD

AI AX with arca and thumb rest $1300 shipped

Nightforce 2.5-20x Mil-XT in a Sphur 1.5” 0 moa mount $1900 shipped

Suppressor and bipod are NOT included. Prices are shipped and is to the lower 48 only. PayPal FF, Venmo, or Zelle for payment.

SOLD

Good little unit. Works fine, just not using it anymore. Comes with all the original accessories shown. $old shipped. PPFF or Zelle preferred.

Even if you're not snowed in, feel free to take advantage of a little extra savings.

Use coupon code SNOWDAY at checkout to save an extra $10 off all orders over $75

Popular Products Today:

Barnes (made by norma) Primed 375 H&H Mag - $109.95 / 100 ct with coupon

Nosler 22 Cal 64 cal Bonded Solid Base (great in 22-250 or 223 Rem) - $77.95 / 250 ct + Free Shipping with Coupon

CAMPRO 30 Cal 220gr FCP Double Cannelure - $89.95 / 500 ct with coupon

Norma 6.5mm 143gr Bondstrike Bullets - $69.95 / 100 ct - Add 2 boxes and save $10 with coupon

Current Rifle Brass in Stock:

I got a box of Hornady 174gr ELD-VT. They are 1.427” long, at least the first 10 I pulled out of the box. If the rest are like that or close then Hornady should pat themselves on the back.

They look odd. The shank is pretty short, like on a 150gr bullet. The nose is loooooong. In my chamber, where a 175gr SMK hits the lands at 2.862”, the VT hits at 2.992”. My mag will accept 2.950” long rounds so I’ll be 40 thou off at least. At that COAL there is plenty of bullet shank in the neck, more than 75%, and the boat tail ends at the bottom of the shoulder inside the case. It will need a dense powder.

I pushed the bullet deeper in the case to see what the minimum seating depth could be and I think it’s 2.800”. At that COAL the beginning of the nose is in line with the case mouth. I don’t like how that looks, however. I think some of the bullet shank should be riding the freebore. But for those so inclined this round can be used in an auto loader.

I’m going to load these on top of my usual charge of AR-Comp and just play with the seating depth to start. I know. I know. You don’t have to say it. I’ll report back in a couple of days.

Tikka Tac A1 Chassis for sale. Used with some light scratches. Includes all original hardware and tools Instruction Manual, Muzzle Break, Scope rail (not pictured), 3 mags, Leofoto Arca Rail, and Custom MLOK weights. $750 CONUS