Hello everyone, first post here but been looking around for quite awhile.

I’ve done my research but still left with a question that I hope someone has some advice for.

I’ve recently put together impact 737r with a Bartlien barrel pre fit. The shop that put together the action and barrel said headspace checked good and sent me home with a barreled action.

I have not shot this gun yet as I was getting the chassis scope etc put together.

Now that this is done I wanted to get more into checking everything on the rifle and bought a set of Manson headspace gauges. It passes the go gauge no problem, however the no-go gauge fails,

looking through posts here I have seen another person mention a similar problem. When closing the bolt I feel resistance with the no-go gauge but with light pressure the bolt can be closed. It almost feels gummed up or just bordering too long. If that makes sense. The field gauge is being delivered today and I imagine it will not close with it.

I’m looking for advice on if this is acceptable or if I am setting myself up for failure. Will this affect accuracy to the point of it not being worth it? Or will it preform normally and provide shorter brass life? That I could live with shorter brass life but this was ment to be my first PRS / fun gun to get into longer ranges.

Just looking for any advice you may have. I apologize for the long winded post.

Looking to buy a Ruger m77 target varmint in .243.

For sale;

Preece precision cut cerakoted impact 737r .223 barrel. This is a catch and release. No idea what blank, 250 shipped. UPDATE: 24 inch barrel

Radix 6creed barrel. Less than 300 rounds on it (probably closer to 200) threaded 5/8 for 737r, proof comp contour 20inch. 400.

300 Norma ARC CDG barrel threaded 3/4th on muzzle, 28 inch straight 1.25 off an xcal stainless blank. 425 shipped.

Foundation with some weights, 737r inlet, 725 shipped. Left hand

Vision long action chassis, 1150 shipped, never used just test fit. Left hand

Bought this 14L thinking it would get used more often and was wronged. New this package would be north of 2150 bucks after taxes shipping. Snag this LNIB package SOLD!

24L with original Anvil 30 TRADED

Will add/update pics asap…
Only trade towards Nightforce Mil-xt reticle optics or possibly a Manners Night Stalker….

Like new Sig Custom Works P320, with roughly 100 flawless rounds fired. Cost is $310 $280 $230 shipped to your FFL.

New in box: $85 shipped

500 22gt brass. 130 shipped PER 100, or take it all for 600 shipped.

SOLD

New in box Aero Solus receiver in PVD FDE. 223 bolt face.

Sold. shipped to your FFL. No trades.

Bushnell Match Pro ED 5-30 with mil reticle. Brand new in the box sold

RRS 22i Compact, legs were wrapped up right away and only used a handful of
times.
$825 shipped (buyer pays insurance if you want it)

Payment PayPal FF or you pay the fees for G&S

PM if interested

Glock 19 Gen 5 9mm With Trijicon RMR (RM01) Streamlight TRL7 Light Blacklist Threaded Barrel Apex Trigger Tier One AIWB Holster .....Gun has Taran Tactical Magwell and all 3 mags have Taran Tactical +2 Base Plates....Gun is Not MOS from factory but was cut after market and then sight dovetail also cut in front of the optic so the sight sits further rear than MOS guns and both sight are in front of the glass so no distortion of sight picture...Gun also has Trijicon Suppressor height night sights installed .........I bought this as you see it online and have no original parts or boxes for anything besides the Glock factory box so what you see in pics is what will be included ..........SPF shipped

Selling my ZCO 840 MPCT2 15 mil locking turret scope. Still have the box and will come with ZCO scope caps and sunshade and everything else that was included in the box. Been used and has some very minor scuffs on it included in pictures. Glass is still perfect and scope functions flawlessly. $3700 shipped. Only trade I’d make is a Kahles 328i DLR LSW plus cash on your side.

I have been using mainly Practiscore to find matches in the North Texas (DFW) area, for those who use it it's not all that good. There are Match Directors do not post a match until days before it starts. Perhaps others are seeking these too so let's post links or info about any 22 Rimfire Matches in the DFW area.

Benchrest, PRS, Steel etc.

Thanks for your help.

Dark distressed
Cut for M5 Bottom Metal
Inlet for Impact 737 SA
360 Precision Steel Arca Rail

No BM included or interior weights

Has some wear from matches. Has some grip tape for finger placement.
Some scuffs in the interior from removing the weights that were in it, cannot see them with your action installed.
Been a great stock for me, moving up to the Samson Stocks.

$950 shipped with steel Arca rail
$850 shipped without Arca rail
PayPal FF or Venmo

Might be willing to trade for Manners Pro Hunter or LRH with mini chassis.

AR10 Upper receiver in 6.5 Creedmoor. Here's a list of parts:

Barrel: Craddock Precision 18" barrel, criterion blank, Rifle +1 gas; I believe the twist is 1-8.
Handguard: KAC URX 4 for the SR25, 15" length.
Gas block: Superlative arms adjustable bleed off GB. <<<< a small hole was drilled in the bottom of the handguard to tighten the set screw.
BCG: JP Enterprises LMOS BCG with Enhanced Bolt
Receiver: SMF Tactical SR-25 / Armalite pattern. (The "slant cut" receivers that fit LMT, Larue, Noveske, KAC, Armalite, Stag, Diamondback pattern lowers).

$1500 for the upper shipped. If you want the Larue lower pictured below, +400 = $1900 shipped for the complete rifle.

Remington 700 LA Std bolt. No ejector in it currently, I have one for it. $150 shipped.

"We hunt as a family, and those in our hunting party who aren’t family are close enough they may as well be. Mine is a family with a long cherished practice of hunting, farming, and raising our own food. The primary origin for these handed down practices and skills comes from my Father, and his Father before him."

Continue Reading Here

Leica rangefinder tripod mount with gray ops arca plate

4-Way Arca Adapter (Anti-Rotate)​

NOTES: This product has an Anti-Rotate Pin (make sure your accessory has an opening for it) PURPOSE: Attach to bottom of scopes, binoculars, or anything with ¼-20 threads FEATURES: Machined from 6061 Aluminum Type II Black Anodizing 4 side dovetail design allows for mounting in the 90, 180, 270...
grayopscnc.com
https://www.bhphotovideo.com/c/product/1333343-REG/leica_42232_tripod_adapter_for_rangemaster.html
$95 shipped for both

Rrs arca plate, benro arca plate, random arca plate.
All like new
$50 shipped for all three



Eberlestock Impact scope cover
New, $60 shipped



Warne 30mm rings, low height I believe
$40 shipped

Like new Gunwerks Magnus GLR SS rifle chambered in 6.5 Creedmoor with carbon Magnus stock and Carbon 24” barrel. AICS bottom metal, Gunwerks directional muzzle break, Triggertech Diamond 2 stage currently in it. 100 rounds down barrel.

>> Would trade towards Accuracy International rifle.

**Scope and Bipod Not included.

$SOLD Shipped and Insured

Looking for a short handle for my RC. Havent seen one online. May buy one chop it down and rethread for a handle. If there is a website I havent come across list below. Is there a handle that will work with same thread pattern from a different company I am not familiar about. Have realized this will be better option when not needing leverage.

Looking to sell or trade my 6.5 Cross. Rifle has exactly 20 rounds fired through it and is in great, a couple of handling marks but otherwise like new condition. I can text a video of it if interested.
$1375.00 shipped
Trades:
Seekins DMR 6mm arc, I can add cash for the right deal.

SOLD

Have a lightly used 6.5 sidewinder for sale. Comes with a 5/8x24 adapter
$140 shipped

5x5 crush it timer with spuhr attachment
$75 shipped to your door

Seems like a decent price and good optic. I like the locking turrets. Anyone have any experience with them? Or know of any other budget friendly quality options? Want to stay around $1000. 3-18, 2.5-20, 4-20 power. Don’t really care for the illuminated reticle. Want to use for long range shooting but also on a dedicated hunting gun to pack around in the mountains. Thanks