Looking for a set of 6x47 dies let me know what you got.
Would be interested in brass too

As stated in the title. $95 each shipped $175 for both shipped CONUS.

"How can you be so sure you never used the .45ACP?" - Because I've literally never loaded for .45ACP, ha.

badger condition one 30mm 1.54 mount $225 shipped

We have the best price anywhere for new frangible bullets.

Starting at 4.7 cents each + Free Shipping, you can shoot like it's the 1990s again.

Check it all out here: https://ravenrocksprecision.com/12-days-of-christmas-sale/

Just saw this posted on L3is social media. Cant see a whole lot but looks pretty clean. Now we need specs!

Brand new condition without a scratch on it. Comes with the box and will include NF Ultra Lite (six screw) or Burris rings. NO TRADES

$old shipped

PayPal F&F, Venmo, Zelle

Login to view embedded media
The Everyday Sniper Podcast: Jacob and Frank Back to Rifles Only for the Cup

In 2025 we are going back to Rifles Only for the final Sniper's Hide Cup. Yes you heard that right, Nov 8th 2025, just before the USMC Birthday we ending the Sniper Hide Cup.

Always great to talk to Jacob, we have a lot of fun discussing stuff.

This podcast is a bit all over the place, my fault, I messed up my computer big time trying to do this simulcast thing so when I logged in to do this podcast, nothing worked and I needed Jacob's audio. I'm a mess...

But Merry Christmas everyone, hope you have a great holiday. Hope you season ended strong.

I have two factory barrel assemblies up for sale. Each was cut down by D. Wilson.

1x 16" 308 in the box w/brake - SOLD

1x 16" 6.5 creedmoor. no box or brake, this was reprofiled for a AAC/Griffin OTB brake. Suppressor would sit at about 14" aka almost flush with the receiver - $1200

Hello everyone. Brand new to WMLRF,
I’m looking at the vortex and new tango wmlrf’s and am just curious why I don’t see them side mounted anywhere. I run a Seeking SP10M in 6.5 and Seekins told me the rail is rigid enough for it, also contacted vortex about zeroing the system from a side mount. They said it was no problem as long as the rail was stiff enough.

I love running a 12 oclock red dot over my optic (March 4.5-28). So in theory, if I zeroed the red dot at 100 yards and the wmlrf, i would never have to dial back to zero between shots before ranging. Could simply put my red dot on target and tap my range button. Am I missing something. Please educate me.

Selling my NIB Maxim 5.56

Asking 1950 shipped.

Its been sitting in my safe. Brand new. Never fired other then the factory test round.

Located in Morgantown, WV.

FFL must receive from private party.

PVA Osprey barrel for ARC Nucleus. I believe this would also headspace on an Archimedes or Mausingfield but I would need to verify that to be certain. Barrel is 18” and chambered in .308 Winchester. M24 contour, 1:9 twist, and 5/8x24 muzzle threads. 375 total rounds recorded.

I would also entertain selling as a barreled action with a gen1 Nucleus for additional funds.

$425 shipped for barrel

For sale or trade is an old school GA Precision 308. She has less than a case of ammo down the barrel and will ship in the pictured SKB hard case with the Arken Gen2 4-16 scope, two 5 round AICS mags and one 10 rounder. Specs below:

- 22” Bartlein 11.25 twist. Appears to be an M24
-Templar action
-Calvin elite trigger
-Badger M5 bottom metal
- Pillar bedded in a Manners GAT stock with the
Most bitchin paint job you’ve ever seen!

Will trade for large frame 308 semis or nice glass, preferably 1-8 Atacr with mount or 4-16 with mount. Asking for $2500 shipped for the entire package.

NIB Athlon Midas Tac 4-16x44. 30mm tube, APRS2 Mil reticle.
$375 $350shipped, insurance on buyer if desired.


View attachment 8573104

100ct Peterson 6.5 PRC brass. Bulk packaged and unopened.
$120shipped

Used MPA scope mount. 34mm, 0 MOA, 1.125 height. Normal match use with a few scuffs here and there. $150 shipped.

I have an ATN X-Sight 4k 3-14x digital rifle scope for sale.

$450

Scope is in fantastic, like new, condition. No scratches, no blemishes, glass and readout is bright and clear, all sensors work 100%.

This scope is essentially a digital video camera with a reticle. It does have a night vision mode that works well with the illuminator.

I bought this scope when my son was learning to shoot & hunt because you can stream the live video to your phone and see where they are aiming/shooting to ensure good shot placement. Worked great! Hes bigger now and doenst need that input so the scope has sat on the shelf for 2+ years.

Comes with all the factory accesories and attachment, factory rings, IR illuminator, etc.. I have the box and all the original paperwork for which will be included with the scope. Also comes already mounted in SWFA high picatinny rings and will drop right onto an AR straight outta the box.

Please excuse the poor photo through the scope. My phone did not want to focus and kept making weird colors that werent there. Actual image though the scope is clear and crisp.

AAC Brakeout 51T muzzle device. Lightly used but has never had a suppressor attached. .30 cal 5/8x24. $75 shipped

As the title states…Lightly used
$60 shipped

I have three MDT Elites.

All three are Rem 700, Short Action and right handed.

Two are black, one is FDE

ALL SOLD

They were all used in a photoshoot, but never fired or taken outside of my studio.

They show some very light wear from mounting, but other than that are practically brand new.

The photos are of the FDE and first black one, once the first black one sells I will go take more photos of the second one.

They are $1,275 $1,250 each shipped, I can take all the usual payment methods. I also run a long range match here in Georgia, we have a match on Jan 5th if you are local and want to pick it up in person I will knock $25 off.

I am always down to trade, feel free to shoot me a trade offer and the worst I will say is no.

If you would like more photos them or a particular part of the chassis, I can do that.

There’s been quite a few discussion about neck tension, neck lube, and some discussion on primer weight sorting too and SD
I have no answers but just questions for the experts here.

Do you suppose that there is a good relationship between getting good SD and neck tension/lube has to do with whether a primer by itself causes enough pressure to dislodge the bullet from the case and enter the rifling? Or by how deep it enters?

Suppose a primer does not always dislodge bullet from the case depending on neck tension, neck crimp, and neck lube. So a lighter hold on the bullet from the neck would result is more likely to dislodge bullet with just the primer, and a stronger neck hold results in more unlikely to dislodge. Then wouldn’t it be a good assumption that a middle strength hold on the neck results in inconsistency in dislodging?

Wouldn’t this inconsistency cause the SD to be higher due to different combustion characteristics?

Then all this discussion around SD in relation to neck tension, lube, crimp, primer weights etc really are trying to find a combo that creates a consistent release?

If so, would a consistent strong neck grip that is stronger than the primer alone can dislodge be about as good as one that consistently allows the release? Or would one be preferable to another? Why?

Login to view embedded media

You get to see some great examples of how reticles, parallax, Side Focus, and glass clarity come into play in this video. It’s an extension of his other video that compared 36 different scopes. He calls them IPVOs.

Notice how some thick lines get in the way when using the tree for drop.

I have a brand new never used black foundation Samson. This has the centurion grip and is inlet for an impact 737r short action. It has all the weights that come with it from foundation.

Please ask if you have any questions about this awesome stock.

Selling for $1800 shipped

Payments accepted are PayPal, checks, or money order.

For fastest response please text me at 636-297-5055

Thanks!
Ben

Lightly used MDT CKYE-POD GEN2 SINGLE PULL STANDARD - BIPOD w/ BTC head. This is the head that works with both picatinny and ARCA.

I used this for two photoshoots, it has some very minor wear on the "holes" where the adjustments are and a bit of wear on the spikes. 100% functional.

Let me know if you need anymore photos.

$450 shipped. SOLD

SOLD” ARC 36mm (28mm Med) 1.10" M-Brace Scope Rings $
Price includes shipping to the lower 48. PayPal F&F for the form of payment.