I have three AICS Accurate Mag and one Accuracy International .308 10 round mags with binder plates. I used two of the AM models a few times for PRS competition with a 6GT round. The AI mag was used once. Please send me a private message to communicate.

$50 each for the AM mags
$80 for the the AI mag

Take all four for $200

Will split shipping cost with you to lower 48. Banned states, please don't. Venmo or PayPal friends and family, or you pay fees for goods and services option.

Brand new mark 5 PR2 Mil 5-25 for sale. $1800 shipped

Curious if anyone has done this with anything other than a 6.5 PRC. I already have a 6.5 PRC on a TL3 so I’d rather do a different caliber. Whatever i decide to go with next will probably be no longer than a 22 inch barrel because a can will be on the end of it. Any thoughts or opinions are appreciated. Thanks.

Selling 150 pieces of brass. 140 never fired, 10 once fired. All the same lot number $250 shipped

This one has me stumped.

A friend asked me to stop by and find wall studs. I grabbed a magnet and stopped by.

SOME seems have screws (or nails) holding the drywall. The rest has no metal anywhere.

Can someone enlighten me on this one?

Selling an unused Short Action Customs modular sizing die in 7 PRC. Has a .311 neck/shoulder bushing included. $275 shipped

New here. I’ve read the rules regarding posting an item for sale in the forum. I am not trying to sell it here. I would, if I had the credentials, but I don’t. I’d like to get an idea for what it’s worth so I can put it on gun broker. I bought this off my neighbor ( fire sale) before he moved. I was with him when he purchased the rifle a year prior at our local gun store. I know it was only shot about 100 rounds. Stainless steel 24” barrel chambered in .308, 1:11 twist rate with 5R rifling. When he bought it, he had the muzzle threaded to 5/8-24, bolt knob (the football) removed and threaded a tactical style handle on. It has Nightforce bases and and elite Hunter Timney trigger. I bought it off of him because he needed the cash, I sold the H.S precision stock and the Nightforce scope on eBay, but obviously I can’t sell the barreled action. Am I even able to ship this? Is it worth more if I keep the scope bases and the trigger with it? It I hear a lot of good things about custom actions these days, but not a whole lot about Remington 700 actions except all the bad stuff.

As it states, looking for a kak down vent bolt carrier for ar15. Lemme know what you've got. Thanks

BLUF: I'm requesting feedback on a BCG for a DMR build, (build list below).

Alright SH fam, I will start a DMR build soon. I will post a voting poll for the BCG, but I am also interested in your thoughts on the other items in the build list as well.

Preface:
I know I could get a (quality rifle) for the amount I will spend on the parts list (or less), but I wanted to get into the hobby of (Building) AR's. This is my first AR build (EVER). So I request that the feedback be focused on the items in the build list & your experience with these parts, or parts you believe to be superior to them at or near the same price point.

Context:
In an effort to subvert the (should have spent that money on training) comments; I have attended 485 hours of credentialed firearms training with reputable training instructors. I try to attend 2-3 classes annually to stay proficient & improve my skill set. This rifle will be used for DMR roles during training missions. I train with a community defense group regularly.

Build list:
1. Ballistic Advantage 18" 223 Wylde SPR fluted SS rifle length, Premium Series, 1.03″ Gas Block Seat for .750″
2. Aero Precession M4E1 Pro stripped lower
3. Aero Precision M4E1 Enhanced upper w/ 15'' handguard
4. BCM carbine MilSpec buffer tube
5. Armaspec AR15 Gen4 C/H/H2 Stealth Recoil Spring Kit:
6. B5 Systems furniture
7. Rise Armament RA-140 Super Sporting Trigger (DTOM)
8. CMMG lower parts kit
9. Fortis Manufacturing tapered castle nut/end plate K1 system
10. Forward Controls Design Stoner 63 style compensator (DA Keymo)
11. DA Sandman S
12. Riflespeed adj. gas block (7543)
13. Radian Weapons combo charging handle / Talon safety
14. DTOM themed; forward assist / take down pins / ejection port
15. Aeroshell 64

Optic Choices:
1. Vortex Razor HD 1-6X24 in Badger Ordinance C1 mount W/ 45 degree offset 509 ACSS
2. Vortex Diamondback Tactical 6-24x50 in Vortex Pro rings w/ 45 Degree offset 509 ACSS

Secondary Feedback, Anything else I will (NEED) besides tools below:
1. Dimpled roll pins
2. Interchangeable brass, metal, nylon hammer
3. Wheeler bolt catch install punch
4. Real Avid AR15 Master bench block
5. Midwest Industries professional armorers wrench
6. Midwest Industries upper receiver rod
7. Wheeler trigger pull scale
8. KZ AR15/M4 Receiver Extension Buffer Tube Block
9. in lb torque wrench
10. ft lb torque wrench
11. in lb driver

just as the title says. asking 300

Hawke Frontier ED X 8x42 Binocular reduced from $539.99 to only $349.99

If you want an amazing binocular while getting a fantastic deal then this is your new binocular. All Frontier models feature Hawke's new H7 optics, offering stunning high definition viewing with incredible color control and phase correction.
High performance lens coatings and Dielectric Coated prisms ensure the highest level of light transmission.
ED X models benefit from Extra-low Dispersion glass for controlled chromatic aberration and the elimination of color fringing.

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Features:
Extra-low Dispersion (ED) glass
Dielectric Coatings
High resolution phase corrected BAK-4 roof prisms
Water repellent lens coatings
Magnesium alloy chassis
Focus from 2m
Replaceable twist-up eye cups with position stops
Stay-on lens covers
Nitrogen purged. Waterproof. Fog proof.
Hawke No-Fault Lifetime Warranty
Objective Lens 42mm
Magnification 8x
Optical System System H7
Field of View (°) 8.1
Eye Relief 18mm
Exit Pupil 0.21″/5.3mm
Lens Coating Wide Band, Anti-reflection, Fully Multi-Coated Lenses with Water Repellent Coating
Field of View 426ft @1000YDS
Apparent Field of View (°) 65
Interpupillary Distance 56 - 74mm
Close Focus 6.6ft
Prism Type Roof
Prism Glass BAK 4
Eye Cups Twist-Up (Replaceable)
Eyecup ⌀ 1.8in/45mm
Diopter Type Right Eye
Tripod Mounting Thread Yes (¼" - 20 UNC)
Height 5.5″
Width 4.1 - 4.8″
Weight 25.6oz

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

New, never fired Norma brass just been laying around for projects never done.

200 pieces of 300 WSM brass: $300 to your door

100 pieces of 7 SAUM brass: $150 to your door

Thanks!
Conrad

I noticed something unusual that I think points to a failure in my mechanics. I took my Vudoo out this weekend to do a bunch of lot testing. When I went back to look at the targets I noticed that I was frequently shooting larger groups with the first five shots, followed by a tighter group with the second.
Shooting at 50 yards off a bipod and rectangular rear squeeze at bag (no ears) from sturdy but not rigid bench. Loading ten rounds, five to the first target, pivot right, and the second five to the second target.
I did have another shooter offer to watch me shooting, and the only thing he noticed was that I was tensing my shoulder in preparation for breaking the shot. I tried to consciously keep my shoulder down, but it didn’t seem to change the pattern in how I was grouping.
Any thoughts on what I might be doing to cause this?
Groups are all five rounds each, left target first, then shift right, usually without breaking position except for the slight pivot.

Up for sale is my XLR Element 4.0 magnesium chassis. I bought this last spring for a high county Mule Deer hunt last fall. Now that the hunt is over I really don't have a need for a lite weight chassis. It worked great, makes for a lite, compact, and easy to carry package.

The chassis specs are listed below.

- Rem 700/clone inlet Short Action
- Flat Dark Earth
- Folding
- Smoke Carbon Buttstock
- Carbon Fiber grip
- Carbon Buttstock "bag rider"
- Thumb Rest
- M-lock QD sling adaptor
- "no magazine included"

This chassis in the listed configuration would cost you $1425 before shipping and taxes.

..........SOLD..........

I will post pictures tonight

​

​

​

Anyone heard on when sierra reloading app is going to be available again. Read on a forum page that it would be in December. It was handy and toilet reading at work.

Looking to sell a Jp lrp07 in 6.5 creedmoor. Jp arca on bottom. Wiebad cheek pad.
Has all the Jp options you can get.
40rnds of factory hornady through it.
$3100 plus the ride. Trades always entertained.

Here is same rifle.

Looking for some advice/thoughts on this load. Broke in a new barrel this weekend. Groups were great, SD not so much. Most of the details below. I included photos of the composite group and the 8 shot group. Not sure what happened with the literal flier, might have been me, might not have.

I'm not sure if I should just chalk this up to barrel break/cold weather or not. Not going to lie, I was expecting a lower SD with how well it was grouping. The 5x5 groups were the 32nd to 56th shots through the new bore. I shot another 17 shots of a different load after the 5x5 group, then the 8 shot group, so shots 74-81.

Oh, and btw, I was getting pressure signs with the suppressor (OCL Polonium); heavy bolt lift and some ejector swipe. Here is the break-down of the suppressor groups. From my limited research, I guess this is a thing where some suppressors will cause pressure signs with an otherwise normal load. I have a Silencerco Omega to try out next time.

Shot a 5 shot group (great group - 0.3 MOA no pressure signs)
Shot a 5 shot group and had pressure signs, group was terrible, worst of the day
Cleaned chamber/barrel
Shot 5 shot group pressure sings went away, good group 0.5 MOA
Shot 2 more, pressure came back, sadly took the suppressor off and put it away
Shot 8 more shots no pressure signs with brake

Right now, I'm leaning to loading another 50 of the exact same load and retesting (with brake and Omega suppressor). I don't live close to the range and with the family I don't get many days at the range, so I try to bring a lot of ammo for thorough testing/practice, even if it means using more components than I need to.

5x5 and 1x8 groups for a total of 33 shots
Avg. Velocity: 2829 fps
Velocity SD: 12.7 fps
Case: Virgin Alpha
Primer: CCI 450 OEM
Powder: 32.5 gr. Varget
Bullet: Berger 105 Hybrid Target
Distance to lands: ~0.055
COAL: ~2.535
Barrel: Proof 6 GT 7.5 Twist (pretty sure Proof has the .120 FB)
Muzzle Device: 6mm Hellfire Match
Range: 101 yards
Ambient Temp: 37 degrees Fahrenheit
Chronograph: Garmin Xero mounted to ARCA
All loads weighed on A&D FX120i

Cleaning out:

Leupold Mk4 30mm high aluminum rings: SOLD


Warne 7912M lite bipod (pic mount): SOLD
(no box)

APA Little Bastard 6mm 5/8x24: SOLD
(no set screws)

RRS Arca QD mount: $40 shipped

A419 universal adapter 1/2x28: SOLD

A419 universal adapter 5/8x24: SOLD

Venmo or Paypal Preferred. Plenty of positive feedback to verify.

(pics to be uploaded momentarily)

Lengthily question but I am completely baffled. I started years ago with a Burriss Eliminater 3 scope and fell in love with the accuracy of it. I then put a Burris4 on my 22-250 and had very good results on prairie dog shoots. The last day of our last hunt the scope quit. Just quit. I sent it in to Burris and they said it was unrepareable and sent me a Eliminater 5 to replace it. Here’s where all of the questions start. I put the 5 on the same rifle and had to put the number two shim under it to elevate to zero@100 yards. Never had a shim under the previous Burris. Never could get the rifle to hold a group. This is the same rifle that was splattering dogs at 400. I sent it back for something being wrong and they sent me another 5. This scope needed a number 3 shim to zero @ 100. Will not group. Has Burris gone down hill? Customer Service huffed and puffed but they did try. What’s the thoughts on this. Going from no spacers and working like a dream on the Eliminater 3 to having to shim up to number 3 shim and not holding a pattern.

Looking for a 16.5” AI AT/AX small tenon (27mm) in .308 or 6.5 creed.

Needs to be 5/8-24 muzzle thread

Used is fine if you know the round count.

Hello SH members. New to the forum but not the 2A community. The welcome e-mail says to review the forum rules & say hi in the New Members thread. _/, _/

Look forward to conversing about all things 2A. Stay frosty SH.

Title says it all, 10x J Unertl scope, 1 inch tube with later production black mounts, both lens caps. One small booger on a screw for the adjustable crosshair ring, does not affect function, still loosens and rotates as needed. I can get pics of the crosshairs if you want. Bought a few for a project and this one didn’t make the cut. I’m asking 800 shipped, but make me a reasonable offer. Might be interested in a trade, not sure what I’d want so just ask. PP F&F or you cover fees, USPS money order, or face to face if close enough. Thanks

Up for sale is a Manners T-5A stock that had a barreled action in it but was never used.
Specs:
Manners T-5A in elite carbon fiber
Manners Gen 2 mini chassis for any REM 700 footprint Short Action
Adjustable butt stock spacer system
Non-rotating flush cups on both sides and bottom rear.
Barrel channel will accommodate up to 1.35 barrel
Stock had to opened up some for a side bolt release as shown in the pics
Bloodshot pattern with high gloss finish
Area 419 arca rail included some minor scratches on it but functions 100%
Weibad cheek piece included
New this set up runs over $2k selling this one for $1150 shipped to lower 48

Selling a nice Leupold Mark 4 LR/T FDE 3.5-10x40mm. Glass is perfect, 168gr turrets with light rings marks. Bright Illuminated TMR reticle, box, scope cap, and manual included. Ready to go on your M110, M4a1, or mk12 clones. $1400 shipped and insured.

Here are some videos I made comparing the new 640 resolution TNC635R with the 384 TNC335R and 256 TNC225R.

I forgot to focus the TNC335R digital objective lens so the night vision looks out of focus. The pig was 380 yards away. I forgot the default on the TNC635R was set to Meters for the range finder. I changed it to yards after this video.

Login to view embedded media
Login to view embedded media